EIM5864-4 5.8 – 6.4 GHz Multi-Stage Power Amplifier ISSUED 10/23/2008 FEATURES • • • • • Excelics 5.8– 6.4GHz Operating Frequency Range 35.5dBm Output Power at 1dB Compression 29.0 dB Typical Power Gain @1dB gain compression -45dBc Typical OIM3@ each tone Pout 22.5dBm Non-Hermetic Metal Flange Package EIM5864-4 EIM1011-4 APPLICATIONS • • Point-to-point and point-to-multipoint radio Military Radar Systems Caution! ESD sensitive device. ELECTRICAL CHARACTERISTICS (Tb = 25 °C, 50 ohm, VD1=7V, VD2=10V, Vgg=-5V) SYMBOL PARAMETER/TEST CONDITIONS MIN TYP MAX UNITS 6.4 GHz Operating Frequency Range 5.8 P1dB Output Power at 1dB Gain Compression 34.5 35.5 dBm G1dB Gain @1dB gain compression 25 29 dB OIMD3 Output 3rd Order Intermodulation Distortion @∆f=10MHz, Each Tone Pout 22.5dBm -45 -42 dBc Input Return Loss -12 -8 dB Output Return Loss -15 -10 dB F Input RL Output RL VD1 Drain Supply Voltage 1 7 V VD2 Drain Supply Voltage 2 10 V IDQ1 Quiescent Drain Current 1 800 mA IDQ2 Quiescent Drain Current 2 1100 Vgg Gate Supply Voltage Rth Thermal Resistance Tb Operating Base Plate Temperature 1300 mA -5 V o 4.2 - 30 C/W + 80 ºC Note: Turn on/off sequence is required: ---to turn on: apply -5V on both Vgg first, then +7V and +10V. ---to turn off: turn +7V and +10V off first, then turn -5V off Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com page 1 of 3 Revised October 2008 EIM5864-4 5.8 – 6.4 GHz Multi-Stage Power Amplifier ISSUED 10/23/2008 MAXIMUM RATINGS @25°C1,2 SYMBOL CHARACTERISTIC ABSOLUTE CONTINUOUS 1,2 VD1 Drain Supply Voltage 1 12V 8V VD2 Drain Supply Voltage 2 14V 10V Vgg Gate Supply Voltage -10V -6 V Igg Gate Current 150mA 50 mA PIN Input Power 17dBm @ 3dB compression TCH Channel Temperature 175°C 150°C TSTG Storage Temperature -65/175°C -65/150°C 29.8W 25W PT Total Power Dissipation Notes: 1. Operating the device beyond any of the above rating may reduce MTTF and cause permanent damage. 2. Bias conditions must also satisfy the following equation Vdd*Idd < (TCH –Tb)/RTH Package Dimension and Pin Assignment EIM5864-4 Dimensions are in inches Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com page 2 of 3 Revised October 2008 EIM5864-4 ISSUED 10/23/2008 5.8 – 6.4 GHz Multi-Stage Power Amplifier DISCLAIMER EXCELICS SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. EXCELICS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN. LIFE SUPPORT POLICY EXCELICS SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF EXCELICS SEMICONDUCTOR, INC. AS HERE IN: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com page 3 of 3 Revised October 2008