NC7SZ08 TinyLogic™ UHS 2-Input AND Gate General Description Features The NC7SZ08 is a single 2-Input AND Gate from Fairchild’s Ultra High Speed Series of TinyLogic™. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.8V to 5.5V VCC range. The inputs and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 6V independent of VCC operating voltage. n Space saving SOT23 or SC70 5-lead surface mount package n Ultra High Speed; TPD 2.7 ns Typ into 50 pF at 5V VCC n High Output Drive; ± 24 mA at 3V VCC n Broad VCC Operating Range; 1.8V to 5.5V n Matches the performance of LCX when operated at 3.3V VCC n Power down high impedance inputs/output n Overvoltage tolerant inputs facilitate 5V to 3V translation n Patented noise/EMI reduction circuitry implemented Ordering Code: Package Package Drawing Package Top Mark Supplied As NC7SZ08M5 Product Code SOT23-5 MA05B 7Z08 250 Units on Tape and Reel NC7SZ08M5X SOT23-5 MA05B 7Z08 3k Units on Tape and Reel NC7SZ08P5 SC70–5 MAA05A Z08 250 Units on Tape and Reel NC7SZ08P5X SC70–5 MAA05A Z08 3k Units on Tape and Reel Logic Symbol Connection Diagram IEEE/IEC Pin Assignment for 5–Lead Packages DS012165-1 Pin Descriptions Pin Names Description A, B Inputs Y Output DS012165-2 (Top View) Function Table Y = AB Inputs Output A B Y L L L L H L H L L H H H H = HIGH Logic Level L = LOW Logic Level TinyLogic™ is a trademark of Fairchild Semiconductor Corporation. © 1997 Fairchild Semiconductor Corporation DS012165 www.fairchildsemi.com NC7SZ08 TinyLogic UHS 2-Input AND Gate November 1997 Absolute Maximum Ratings (Note 1) Negative Source Current (NIT) Positive Source Voltage (PVT) −0.5V to +6V Supply Voltage (VCC) −0.5V to +6V DC Input Voltage (VIN) −0.5V to +6V DC Output Voltage (VOUT) DC Input Diode Current (IIK) @ VIN < −0.5V −50 mA @ VIN > 6V +20 mA DC Output Diode Current (IOK) @ VOUT < −0.5V −50 mA @ VOUT > 6V, VCC = GND +20mA ± 50 mA DC Output Current (IOUT) ± 50 mA DC VCC/GND Current (ICC/IGND) −65˚C to +150˚C Storage Temperature (TSTG) 150˚C Junction Temperature under Bias (TJ) Junction Lead Temp. (TL) (Soldering, 10 sec) 260˚C Power Dissipation (PD) @ +85˚C SOT23–5 200 mW SC70–5 150 mW ESD Tolerance (Human Body Model) MIL-STD-883D Method 3015.7 1000V DC Latchup Tolerance (Jedec Method 17) −500 mA +8V Recommended Operating Conditions Supply Voltage Operating (VCC) Supply Voltage Data Retention (VCC) Input Voltage (VIN) Output Voltage (VOUT) Operating Temperature (TA) Input Rise and Fall Time (tr, tf) VCC = 1.8V, 2.5V ± 0.2V VCC = 3.3V ± 0.3V VCC = 5.0V ± 0.5V Thermal Resistance (θJA) SOT23–5 SC70–5 1.8V to 5.5V 1.5V to 5.5V 0V to 5.5V 0V to VCC −40˚C to +85˚C 0 ns/V to 20 ns/V 0 ns/V to 10 ns/V 0 ns/V to 5 ns/V 300˚C/W 425˚C/W Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its usefulI life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. DC Electrical Characteristics Symbol Parameter VCC (V) NC7SZ08 NC7SZ08 TA = 25˚C TA = −40˚C to +85˚C Min VIH High Level Input Voltage VIL Low Level Input Voltage VOH High Level Output Voltage 1.8 0.75 VCC 2.3-5.5 0.7 VCC Typ Low Level Output Voltage IIN Input Leakage Current IOFF Power Off Leakage Current ICC Quiescent Supply Current www.fairchildsemi.com Min V 0.7 VCC 1.8 0.25 VCC 0.25 VCC 0.3 VCC 0.3 VCC 1.8 1.7 1.8 1.7 2.3 2.2 2.3 2.2 3.0 2.9 3.0 2.9 4.5 4.4 4.5 4.4 2.3 1.9 2.15 1.9 3.0 2.5 2.80 2.4 3.0 2.4 2.68 2.3 4.5 3.9 4.20 3.8 Conditions Max 0.75 VCC 2.3-5.5 VOL Max Units V V VIN = VIH IOH = −100 µA IOH = −8 mA IOH = −16 mA V IOH = −24 mA IOH = −32 mA 1.8 0.0 0.1 0.1 V 2.3 0.0 0.1 0.1 3.0 0.0 0.1 0.1 4.5 0.0 0.1 0.1 2.3 0.10 0.3 0.3 3.0 0.15 0.4 0.4 IOL = 16 mA 3.0 0.22 0.55 0.55 IOL = 24 mA 4.5 0.22 0.55 0.55 VIN = VIL IOL = 8 mA V IOL = 32 mA 0-5.5 ±1 ± 10 µA VIN = 5.5V, GND 0.0 1 10 µA VIN or VOUT = 5.5V 1.8-5.5 2.0 10 µA VIN = 5.5V, GND 2 IOL = 100 µA AC Electrical Characteristics NC7SZ08 Symbol Parameter VCC TA = +25˚C (V) Min tPLH, tPHL tPLH, tPHL Propagation Delay Propagation Delay CIN Input Capacitance CPD Power Dissipation Capacitance NC7SZ08 TA = −40˚C Typ Max Min Max 1.8 2.0 5.2 10 2.0 10.5 2.5 ± 0.2 0.8 3.4 7 0.8 7.5 3.3 ± 0.3 0.5 2.6 4.7 0.5 5.0 5.0 ± 0.5 0.5 2.2 4.1 0.5 4.4 3.3 ± 0.3 1.5 3.3 5.2 1.5 5.5 5.0 ± 0.5 0.8 2.7 4.5 0.8 4.8 0 4 3.3 20 5.0 25 Units Conditions Fig. to +85˚C No. ns ns CL = 15 pF, RL = 1 MΩ Figures 1, 3 CL = 50 pF, RL = 500Ω Figures 1, 3 (Note 2) Figure 2 pF pF Note 2: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2 .) CPD is related to ICCD dynamic operating current by the expression: ICCD = (CPD) (VCC) (fIN) + (ICC static) DS012165-3 CL includes load and stray capacitance Input PRR = 1.0 MHz, tw = 500 ns FIGURE 1. AC Test Circuit DS012165-4 FIGURE 3. AC Waveforms DS012165-5 input = Ac Waveform; tr = tf = 1.8 ns; PRR = 10 MHz; Duty Cycle = 50% FIGURE 2. ICCD Test Circuit 3 www.fairchildsemi.com Ordering Information The device number is used to form part of a simplified purchasing code where the package type and temperature range are defined as follows: DS012165-6 www.fairchildsemi.com 4 Tape and Reel Specification TAPE FORMAT Package Tape Number Cavity Designator Section Cavities Status Status 125 (typ) Empty Sealed Leader (Start End) M5, P5 Carrier M5X, P5X Cover Tape 250 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed Leader (Start End) 125 (typ) Empty Sealed 3000 Filled Sealed 75 (typ) Empty Sealed Carrier Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) DS012165-1 Pkg Tape Size SC70-5 8 mm SOT23-5 8 mm DIM A DIM B DIM F DIM Ko DIM P1 DIM W 0.315 ± 0.004 0.093 0.096 0.138 ± 0.004 0.053 ± 0.004 0.157 (2.35) (2.45) (3.5 ± 0.10) (1.35 ± 0.10) (4) (8 ± 0.1) 0.130 0.130 0.138 ± 0.002 0.055 ± 0.004 0.157 0.315 ± 0.012 (3.5 ± 0.05) (1.4 ± 0.11) (4) (8 ± 0.3) (3.3) (3.3) 5 www.fairchildsemi.com Tape and Reel Specification (Continued) REEL DIMENSIONS inches (millimeters) DS012165-2 Tape Size 8 mm A B C D N W1 W2 W3 7.0 0.059 0.512 0.795 2.165 0.331 +0.059/−0.000 0.567 W1 +0.078/−0.039 (177.8) (1.50) (13.00) (20.20) (55.00) (8.40 +1.50/−0.00) (14.40) (W1 +2.00/−1.00) www.fairchildsemi.com 6 Physical Dimensions inches (millimeters) unless otherwise noted 5-Lead Molded SOT23, Enhanced Thermal Package Number MA05B 7 www.fairchildsemi.com NC7SZ08 TinyLogic UHS 2-Input AND Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 5-Lead Molded SC70, Enhanced Thermal Package Number MAA05A LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into sonably expected to cause the failure of the life support the body, or (b) support or sustain life, and (c) whose device or system, or to affect its safety or effectiveness. failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. Fairchild Semiconductor Corporation Americas Customer Response Center Tel: 1-888-522-5372 www.fairchildsemi.com Fairchild Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: [email protected] Deutsch Tel: +49 (0) 8 141-35-0 English Tel: +44 (0) 1 793-85-68-56 Italy Tel: +39 (0) 2 57 5631 Fairchild Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: +852 2737-7200 Fax: +852 2314-0061 National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.