New Product SS2PH9 & SS2PH10 Vishay General Semiconductor High-Voltage Surface Mount Schottky Barrier Rectifiers High Barrier Technology for Improved High Temperature Performance FEATURES • Very low profile - typical height of 1.0 mm eSMP TM Series • Ideal for automated placement • Low forward voltage drop, low power losses • High efficiency • Low thermal resistance • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C DO-220AA (SMP) • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in high frequency inverters, freewheeling, dc-to-dc converters and polarity protection applications. PRIMARY CHARACTERISTICS IF(AV) 2.0 A VRRM 90 V, 100 V IFSM 50 A EAS 11.25 mJ VF at IF = 1.0 A 0.62 V IR max. 1.0 µA TJ max. 175 °C MECHANICAL DATA Case: DO-220AA (SMP) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Color band denotes the cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code SS2PH9 SS2PH10 29 210 90 100 UNIT Maximum repetitive peak reverse voltage VRRM Maximum average forward rectified current (Fig. 1) IF(AV) 2.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 50 A Non-repetitive avalanche energy at TJ = 25 °C, IAS = 1.5 A, L = 10 mH EAS 11.25 mJ dV/dt 10 000 V/µs TJ, TSTG - 55 to + 175 °C Voltage rate of change (rated VR) Operating junction and storage temperature range Document Number: 84682 Revision: 19-May-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] V www.vishay.com 1 New Product SS2PH9 & SS2PH10 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 2.0 A IF = 2.0 A Maximum instantaneous forward voltage (1) Maximum reverse current at rated VR (2) Typical junction capacitance SYMBOL TYP. MAX. UNIT TJ = 25 °C TJ = 125 °C VF 0.77 0.62 0.80 0.66 V TJ = 25 °C TJ = 125 °C IR 0.1 60 1.0 500 µA CJ 65 - pF SS2PH9 SS2PH10 UNIT 4.0 V, 1 MHz Notes: (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL RθJA RθJL RθJC Typical thermal resistance (1) 110 15 25 °C/W Note: (1) Thermal resistance from junction to ambient and junction to lead mounted on P.C.B. with 15 x 15 mm copper pad areas. RθJL is measured at the terminal of cathode band. RθJC is measured at the top center of the body ORDERING INFORMATION (Example) PREFERRED P/N SS2PH9-E3/84A SS2PH9-E3/85A UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.024 84A 3000 7" diameter plastic tape and reel 10 000 13" diameter plastic tape and reel 0.024 85A (1) 0.024 84A 3000 7" diameter plastic tape and reel SS2PH9HE3/85A (1) 0.024 85A 10 000 13" diameter plastic tape and reel SS2PH9HE3/84A Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 50 Peak Forward Surge Current (A) Average Forward Current (A) 2.5 2.0 1.5 1.0 0.5 TL Measured at the Cathode Band Terminal 40 30 20 10 0 0 25 50 75 100 125 150 175 1 10 100 TL - Lead Temperature (°C) Number of Cycles at 50 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 84682 Revision: 19-May-08 New Product SS2PH9 & SS2PH10 Vishay General Semiconductor 1000 TJ = 175 °C Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 TJ = 150 °C TJ = 125 °C 1 TJ = 25 °C 0.1 0.2 10 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 0.1 1.2 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 1000 Transient Thermal Impedance (°C/W) 10 000 Instantaneous Reverse Current (µA) 100 TJ = 175 °C 1000 TJ = 150 °C 100 TJ = 125 °C 10 1 0.1 TJ = 25 °C 0.01 10 20 30 40 50 60 70 80 90 100 10 1 0.01 100 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Leakage Characteristics Figure 6. Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-220AA (SMP) 0.012 (0.30) REF. Cathode band 0.053 (1.35) 0.041 (1.05) 0.086 (2.18) 0.074 (1.88) 0.142 (3.61) 0.126 (3.19) 0.036 (0.91) 0.024 (0.61) 0.103 (2.60) 0.087 (2.20) 0.032 (0.80) 0.016 (0.40) 0.158 (4.00) 0.146 (3.70) 0.105 (2.67) 0.013 (0.35) 0.004 (0.10) 0.045 (1.15) 0.033 (0.85) 0.012 (0.30) 0.018 (0.45) 0.000 (0.00) 0.006 (0.15) Document Number: 84682 Revision: 19-May-08 0.025 0.030 (0.635) (0.762) 0.100 (2.54) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] 0.050 (1.27) www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1