ESH1B, ESH1C & ESH1D Vishay General Semiconductor Surface Mount Ultrafast Plastic Rectifiers FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Ultrafast recovery times for high efficiency • Low forward voltage, low power loss • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C DO-214AC (SMA) • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in secondary rectification and freewheeling for ultrafast switching speeds ac-to-ac and dc-to-dc converters in high temperature conditions for both consumer and automotive applications. PRIMARY CHARACTERISTICS IF(AV) 1A VRRM 100 V, 150 V, 200 V trr 25 ns VF 0.90 V TJ max. 175 °C MECHANICAL DATA Case: DO-214AC (SMA) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code Maximum repetitive peak reverse voltage VRRM Maximum RMS voltage ESH1B ESH1C ESH1D EHB EHC EHD 100 150 200 UNIT V VRMS 70 105 140 V Maximum DC blocking voltage VDC 100 150 200 V Maximum average forward rectified current at TL = 150 °C IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 50 A TJ, TSTG - 55 to + 175 °C Operating junction and storage temperature range Document Number: 88890 Revision: 27-Aug-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 ESH1B, ESH1C & ESH1D Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 0.7 A IF = 1 A Maximum instantaneous forward voltage SYMBOL VALUE UNIT VF 0.87 0.90 V IR 1.0 25 µA (1) Maximum DC reverse current at rated DC blocking voltage TA = 25 °C TA = 125 °C Maximum reverse current VR = 20 V, TJ = 150 °C IR 50 µA Maximum reverse recovery time IF = 0.5 A, IR = 1 A, Irr = 0.25 A trr 25 ns Typical reverse recovery time IF = 0.6 A, VR = 30 V, dI/dt = 50 A/µs, Irr = 10 % IRM TJ = 25 °C TJ = 100 °C trr 25 35 ns Typical stored charge IF = 0.6 A, VR = 30 V, dI/dt = 50 A/µs, Irr = 10 % IRM TJ = 25 °C TJ = 100 °C Qrr 10 15 nC Typical junction capacitance 4.0 V, 1 MHz CJ 25 pF Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL ESH1B ESH1C RθJA RθJL Typical thermal resistance (1) ESH1D UNIT 85 30 °C/W Note: (1) Units mounted on P.C.B. with 5.0 x 5.0 mm (0.013 mm thick) land areas ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE ESH1D-E3/61T 0.064 61T 1800 7" diameter plastic tape and reel ESH1D-E3/5AT 0.064 5AT 7500 13" diameter plastic tape and reel ESH1DHE3/61T (1) 0.064 61T 1800 7" diameter plastic tape and reel ESH1DHE3/5AT (1) 0.064 5AT 7500 13" diameter plastic tape and reel Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 50 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 1.2 1.0 0.8 0.6 TL Measured at the Cathode Band Terminal 0.4 0.2 40 30 20 10 0 0 95 105 115 125 135 145 155 165 175 1 100 10 Lead Temperature (°C) Number of Cycles at 60 Hz Figure 1. Maximum Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88890 Revision: 27-Aug-07 ESH1B, ESH1C & ESH1D Vishay General Semiconductor 100 100 TJ = 150 °C Junction Capacitance (pF) Instantaneous Reverse Leakage Current (µA) TJ = 175 °C 10 TJ = 125 °C 1 TJ = 100 °C 0.1 0.01 TJ = 125 °C 0.001 20 1 40 60 80 100 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) Reverse Voltage (V) Figure 3. Typical Reverse Leakage Characteristics Figure 5. Typical Junction Capacitance 100 Transient Thermal Impedance (°C/W) 100 Instantaneous Forward Current (A) 10 TJ = 125 °C 10 TJ = 150 °C 1 TJ = 175 °C TJ = 25 °C 0.1 0.01 0.2 0.4 0.6 0.8 1.0 1.2 10 1 0.01 1.4 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 4. Typical Instantaneous Forward Characteristics Figure 6. Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AC (SMA) Cathode Band Mounting Pad Layout 0.110 (2.79) 0.100 (2.54) 0.065 (1.65) 0.049 (1.25) 0.177 (4.50) 0.157 (3.99) 0.012 (0.305) 0.006 (0.152) 0.060 (1.52) MIN. 0.208 (5.28) REF. 0.090 (2.29) 0.078 (1.98) 0.060 (1.52) 0.030 (0.76) 0.074 (1.88) MAX. 0.066 (1.68) MIN. 0.008 (0.203) 0 (0) 0.208 (5.28) 0.194 (4.93) Document Number: 88890 Revision: 27-Aug-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1