1417 Vishay Foil Resistors Bulk Metal® Foil Technology 8 Pin Transistor Outline Hermetic Resistor Network The eight pin TO-5 package with 0.230" pin circle is an alternative layout to Model 1413. This network can contain up to 12, V5X5 resistor chips. Review data sheet “7 Technical Reasons to Specify Bulk Metal® Foil Resistor Networks.” Product may not be to scale ORDERING INFORMATION - 1417 PARTS THROUGH HOLE Networks are built to your requirements. Send your schematic and electrical requirements to the Applications Engineering Department. (See data sheet “Network Worksheet.”) A unique part number will be assigned which defines all aspects of your network. FIGURE 1 - STANDARD DIMENSIONS in inches (millimeters) 0.305 –0.335 (7.75 –8.51) VISHAY MODEL NUMBER 0.200 MAXIMUM (5.08) NOTE: 45˚ EQUALLY SPACED 4 1. These networks utilize Vishay Bulk Metal® Foil resistor chips V5X5 and V15X5 or VTF15X5 Thin Film chips. 5 3 2. The V5X5 and V15X5 chips have maximum resistance values of 10K and 33K respectively in Bulk Metal® Foil and 500K in VTF15X5 Thin Film chips. 6 2 7 1 0.030 –0.040 (0.76 –1.02) 0.4 Watt V5X5 - 12 chips 0.500 MINIMUM 0.230 TYPICAL (12.7) (5.84) DIAMETER 0.350 –0.370 (8.89 –9.39) MAXIMUM POWER RATING (WATTS) @ +70°C V15X5 - 3 chips 1417 8 LEADS 0.016 –0.019 (0.41 –0.48) CHIP CAPACITY 3. The V5X5 and V15X5 chip(s) can be intermixed in a package. 8 0.027 –0.033 (0.69 –0.89) (VIEWED FROM BOTTOM) FIGURE 2 - SAMPLE CIRCUIT DESIGNS AND CHIP LAYOUTS EIGHT RESISTOR (12 ELEMENT) ARRAY NOTE: Usable area is represented by dotted lines— a cross 0.200" x 0.200" with arm width of 0.100". Illustrations not to scale. Chips shown undersize for clarity. Drawing view is from the top looking down into the package. 1 2 1 8 1/2 R1 R2 3 R8 1/2R1 R4 R7 8 7 R1 R6 1/2R7 1/2 R7 7 1/2 1/2R5 R R3 6 1/2R3 R8 2 R2 6 R5 1/2 R5 4 6 EIGHT RESISTOR NETWORK 3 4 R3 R4 5 TRIPLE DIVIDER 5 2 2 7 3 1 R2 8 2 R4 R6 R8 R7 R1 R3 6 4 R5 6 5 8 6 8 R2 R3 R6 R6 7 7 5 3 R5 R4 2 R4 R5 R8 7 5 R1 R1 R3 4 8 R2 R7 R6 R4 5 1 R2 R3 R5 4 3 1 R1 4 1 3 6 SALES • ISRAEL: [email protected] • FRANCE/SWITZERLAND/SOUTHERN EUROPE: [email protected] • AMERICAS: [email protected] • ASIA/JAPAN: [email protected] • UK/HOLLAND/SCANDINAVIA: [email protected] • GERMANY/CZECH REPUBLIC/AUSTRIA: [email protected] www.vishay.com 122 For technical questions in the Americas, contact [email protected] Document Number: 63040 For technical questions in Asia/Japan/Europe/Africa/Israel, contact [email protected] Revision 07-Mar-05 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1