VISHAY 1401_08

1401
Vishay Foil Resistors
Bulk Metal® Foil Technology
3 Pin Transistor Outline Hermetic Resistor Network
The three pin TO-18 package is suitable for single resistor
hermetic packaging with case and lid grounded for electrical
isolation. This unique package may also be used to provide a
voltage divider, but the user is cautioned that the center tap
must go to ground.
Review data sheet “7 Technical Reasons to Specify Bulk
Metal® Foil Resistor Networks.”
Product may not
be to scale
ORDERING INFORMATION - 1401 PARTS
3 pins on a 0.100" pin circle– pin 3 case grounded.
FIGURE 1 - STANDARD DIMENSIONS in inches (millimeters)
DIAMETER 0.178 –0.195
(4.52 –4.95)
3
0.100
(2.54)
0.200
MAXIMUM
(5.08)
CASE
GROUNDED
2
VISHAY
MODEL NUMBER
MAXIMUM POWER RATING
(WATTS) @ +70°C
V15X5 - 1 chip
V15X5 - 1 chip
and
V5X5 - 1 chip
1401
45°
1
0.15 Watt
V5X5 - 2 chips
0.500
MINIMUM
(12.7)
0.028 –0.048
(0.71 –1.22)
3 LEADS
0.016 –0.021 0.209 –0.230
(0.41 –0.48) (5.31 –5.84)
CHIP
CAPACITY
0.036 –0.046
(0.91 –1.17)
(VIEWED FROM BOTTOM)
DIAMETER
NOTES:
1. These networks utilize Vishay Bulk Metal® Foil resistor
chips V5X5 and V15X5 or VTF15X10 Thin Film chips.
2. The V5X5 and V15X5 chips have maximum resistance
values of 10K and 33K respectively in Bulk Metal® Foil
and 500K in VTF15X5 Thin Film chips.
FIGURE 2 - SAMPLE CIRCUIT DESIGNS AND CHIP LAYOUTS
NOTE:
2
Usable area is represented by the dotted lines— a cross 0.150 Inches x 0.150 Inches with arm width of 0.05 Inches.
Illustrations not to scale. Chips shown undersize for clarity. Drawing view is from the top looking down into the
package.
1
2
1
3
R1
R1
R1
R2
R1
2
3
R2
3
1
CASE
2
CASE
ONE RESISTOR
CASE GROUNDED
DIVIDER
CENTER TAP GROUNDED
SALES
• ISRAEL: [email protected]
• FRANCE/SWITZERLAND/SOUTHERN EUROPE: [email protected]
• AMERICAS: [email protected]
• ASIA/JAPAN: [email protected] • UK/HOLLAND/SCANDINAVIA: [email protected] • GERMANY/CZECH REPUBLIC/AUSTRIA: [email protected]
For technical questions in the Americas, contact [email protected]
Document Number: 63037
For technical questions in Asia/Japan/Europe/Africa/Israel, contact [email protected]
Revision 02-Mar-05
www.vishay.com
119
THROUGH HOLE
Networks are built to your requirements. Send your
schematic and electrical requirements to the Applications
Engineering Department. (See data sheet “Network
Worksheet.”) A unique part number will be assigned which
defines all aspects of your network.
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1