MA-COM SR2M

SCHRACK
General Purpose Relays
Safety Relay SR2M
I
2 pole safety relay with either 1NO+1NC or 2CO contacts
I
Forcibly guided contacts according to EN 50205
I
Rated current 6 A
I
6 kV surge resistance between poles
I
RoHS compliant (Directive 2002/95/EC)
as per product date code 0407
Applications
Emergency shut-off, machine control, elevator and escalator
control, light barrier control
F0188-C
Approvals
V
REG.-Nr. 116064, Z E214024, T 968/EZ 111.00/01
Technical data of approved types on request
Contact data
Contact configuration
Contact set
Type of interruption
Rated current
Rated voltage / max.switching voltage AC
Maximum breaking capacity AC
Utilization class (AC-15) acc. IEC 60947-5-1
NO contact
NC contact
Contact material
Minimum contact load
Contact resistance
1 NO contact and 1 NC contact
or
2 CO contacts 1)
single contact, forcibly guided
1 NC + 1NO: type A according to EN 50205
2 CO: type B according to EN 50205
micro disconnection
6A
240 / 400 VAC
1500 VA
Ie 3 A / Ue 250 VAC (inrush 30 A)
Ie 1.5 A / Ue 250 VAC (inrush 15 A)
AgNi
10 mA / 5 V
w 100 mOhm / 1 A / 24 VDC
w 20 Ohm / 10 mA / 5 VDC
Mechanical endurance
10x106 cycles
Rated frequency of operation with / without load
6 min-1 / 300 min-1
1
) According EN50205 only 1NO / 1NC (11-14 and 22-21 or 12-11 and 21-24) shall be used as forcibly
guided contacts.
Coil data
Rated coil voltage range DC coil
Coil power DC coil
Operative range
5...110 VDC
appr. 700 mW
2
Coil versions, DC-coil
Coil
Rated
Operate
Release
Coil
Rated coil
code
voltage
voltage
voltage
resistance
power
VDC
VDC
VDC
Ohm
mW
005
5
3.8
0.5
35,7+10%
700
006
6
4.5
0.6
51+10%
706
009
9
6.8
0.9
116+10%
698
012
12
9.0
1.2
206+10%
699
015
15
11.3
1.5
321+10%
700
018
18
13.5
1.8
483+10%
671
021
21
15.8
2.1
630+10%
700
024
24
18.0
2.4
823+10%
700
036
36
27.0
3.6
1851+10%
700
040
40
30.0
4.0
2286+10%
700
048
48
36.0
4.8
3291+12%
700
060
60
45.0
6.0
5142+12%
700
080
80
64.0
8.5
9143+12%
700
110
110
82.5
11.0
17285+12%
700
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request
1
Datasheet
Rev. HC1
Issued 2008/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical parameters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.
SCHRACK
General Purpose Relays
Safety Relay SR2M (Continued)
Insulation
PCB layout / terminal assignment
Insulation resistance coil-contact circuit
Dielectric strength coil-contact circuit
open contact circuit
adjacent contact circuits
Clearance / creepage coil-contact circuit
adjacent contact circuits
Material group of insulation parts
Tracking index of relay base
Insulation to IEC 60664-1
Type of insulation coil-contact circuit
open contact circuit
adjacent contact circuits
Rated insulation voltage
Pollution degree
Rated voltage system
Overvoltage category
Insulation to EN 50178
Type of insulation coil-contact circuit
adjacent contact circuits
> 100x106 Ohm
4000 Vrms
1500 Vrms
3000 Vrms
W 8 / 8 mm
W 5.5 / 5.5 mm
W IIIa
CTI 250
Bottom view on solder pins
2 CO contacts
reinforced
functional
basic
250 V
2
230/400 V
III
S0163-CO
reinforced
reinforced
Other data
RoHS - Directive 2002/95/EC
compliant as per product date code 0407
Ambient temperature range
-25...+70 °C
Vibration resistance (function) NO / NC contact
> 10 / 2.5 g, 15....200 Hz
Shock resistance (function) NO / NC contact
> 10 / 5 g, 11 ms half sine
Category of protection
RT III 2)
Resistance to soldering heat
260°C / 5 s
Relay weight
20 g
Packaging unit
20 pcs
2)
S0163-BJ
1 NO and 1 NC contacts
please contact technical support for washing parameters
S0163_CU
Dimensions
S0163-CV
S0273-BB
2
Datasheet
Rev. HC1
Issued 2008/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical parameters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.
SCHRACK
General Purpose Relays
Safety Relay SR2M (Continued)
Product key
V 2 3 0 4 7 - A 1
- A 5
Type
Version
A1 standard
Coil
Coil code = rated coil voltage (e.g. 024=24VDC)
Contact set
A single contact
Contact material
5 AgNi
Contact configuration
01 2 CO contacts
11 1 NO and 1 NC contact
Other types on request
Product key
V23047-A1005-A501
V23047-A1005-A511
V23047-A1006-A501
V23047-A1006-A511
V23047-A1009-A501
V23047-A1009-A511
V23047-A1012-A501
V23047-A1012-A511
V23047-A1018-A501
V23047-A1018-A511
V23047-A1021-A501
V23047-A1021-A511
V23047-A1024-A501
V23047-A1024-A511
V23047-A1036-A501
V23047-A1036-A511
V23047-A1040-A501
V23047-A1040-A511
V23047-A1048-A501
V23047-A1048-A511
V23047-A1060-A511
V23047-A1110-A511
Version
standard
wash tight
Contact material
AgNi
Configuration
2 CO contacts
1 NO + 1 NC
2 CO contacts
1 NO + 1 NC
2 CO contacts
1 NO + 1 NC
2 CO contacts
1 NO + 1 NC
2 CO contacts
1 NO + 1 NC
2 CO contacts
1 NO + 1 NC
2 CO contacts
1 NO + 1 NC
2 CO contacts
1 NO + 1 NC
2 CO contacts
1 NO + 1 NC
2 CO contacts
1 NO + 1 NC
Coil
5 VDC
6 VDC
9 VDC
12 VDC
18 VDC
21 VDC
24 VDC
36 VDC
40 VDC
48 VDC
60 VDC
110 VDC
Part number
0-1393258-2
7-1415006-1
3-1415011-1
6-1415011-1
0-1393258-3
7-1415011-1
0-1393258-4
0-1393258-5
0-1393258-8
0-1393258-9
1-1393258-1
1-1393258-2
1-1393258-5
1-1393258-7
2-1393258-0
8-1415011-1
2-1393258-1
2-1393258-2
3-1415006-1
9-1415011-1
2-1393258-3
2-1415012-1
3
Datasheet
Rev. HC1
Issued 2008/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical parameters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.