QH01-0016-G Low Cost GMIC SMT Quad Hybrid 800 - 905 MHz Rev. V3 Features • • • • • Small Size and Low Profile Typical Insertion Loss 0.7 dB Typical Amplitude Balance 0.3 dB 1 Watt Power Handling SOT-26 Package Functional Block Diagram Description M/A-COM’s QH01-0016-G is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOT-26 plastic package. This Quad Hybrid is ideally suited for applications where small size, low insertion loss, superior phase/amplitude tracking and low cost are required. Typical applications include base station switching networks and other cellular applications where size and PCB real estate are at a premium. Available in Tape and Reel. The QH01-0016-G is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. Pin Configuration Ordering Information Part Number Package QH01-0016-G Bulk Packaging QH01-0016-G-TR 1000 piece reel Pin No. Function Pin No. Function 1 RF IN 4 0º OUTPUT 2 GND 5 GND 3 ISOLATED 6 90º OUTPUT Note: Reference Application Note M513 for reel size information. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. QH01-0016-G Low Cost GMIC SMT Quad Hybrid 800 - 905 MHz Rev. V3 Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Units Min Typ Max Insertion Loss above 3.0 dB dB — 0.7 1.2 Isolation dB 14 17 — — — — — 1.3:1 1.35:1 1.5:1 1.5:1 dB — 0.3 0.7 Deg — 1.5 6 VSWR Input RF1, RF2 Outputs Amplitude Balance Phase Balance Absolute Maximum Ratings 1,2 Parameter Absolute Maximum 3 1 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Input Power Recommended PCB Configuration 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 3. With internal load dissipation of 0.125 W Maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. QH01-0016-G Low Cost GMIC SMT Quad Hybrid 800 - 905 MHz Rev. V3 Typical Performance Curves @ 25ºC Insertion Loss vs. Frequency Amplitude Balance vs. Frequency VSWR vs. Frequency Isolation vs. Frequency Phase Balance vs. Frequency 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. QH01-0016-G Low Cost GMIC SMT Quad Hybrid 800 - 905 MHz Rev. V3 SOT-26† † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.