DS52-0005 Low Cost Two-Way SMT Power Divider, 1700 - 1900 MHz Rev. V6 Features • • • • • • • Small Size and Low Profile SOIC-8 Package Superior Repeatability Excellent Amplitude Balance: 0.05 dB Typical Excellent Insertion Loss: 0.3 dB Typical Low Cost DCS-1800 Frequency Coverage Functional Block Diagram Description M/A-COM’s DS52-0005 is an IC-based monolithic power divider in a low cost SOIC-8 plastic package. This 2-way power splitter is ideally suited for applications where small size, low profile and low cost, without sacrificing performance are required. Typical applications include base station, portables and PCMCIA cards for DCS-1800 European applications. Available in tape and reel. The DS52-0005 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. Pin Configuration Ordering Information Pin No. Function 1 GND 2 RF-IN Part Number Package DS52-0005 Bulk Packaging 3 GND DS52-0005-TR 1000 piece reel 4 GND DS52-0005SAM Sample Test Board 5 RF-1 (out) 6 GND 7 GND 8 RF-2 (out) Note: Reference Application Note M513 for reel size information. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS52-0005 Low Cost Two-Way SMT Power Divider, 1700 - 1900 MHz Rev. V6 Electrical Specifications1: TA = 25°C 1. Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Above 3.0 dB 1700 - 1900 dB — 0.3 0.5 Isolation — 1700 - 1900 dB 15 20 — VSWR — 1700 - 1900 Ratio — 1.3:1 1.5:1 Amplitude Balance — 1700 - 1900 dB — 0.1 0.15 Phase Balance — 1700 - 1900 Deg — 2 4 All specifications apply with a 50-ohm source and load impedance. Absolute Maximum Ratings 2,3 Parameter Input Power 2. 3. 4. 4 Absolute Maximum Recommended PCB Configuration 1W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. With internal load dissipation of 0.125W maximum Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS52-0005 Low Cost Two-Way SMT Power Divider, 1700 - 1900 MHz Rev. V6 Typical Performance Curves Isolation vs. Frequency 0.5 30 0.4 25 Iso la tio n (dB ) Insertio n Lo ss (dB) Insertion Loss vs. Frequency (above theoretical split loss) 0.3 0.2 0.1 0.0 1700 20 15 10 5 0 1740 1780 1820 1860 1700 1900 1740 Frequency (MHz) 1860 1900 1860 1900 Output VSWR vs. Frequency 1.5 1.5 1.4 1.4 1.3 1.3 V SW R VSW R 1820 F requency (M H z) Input VSWR vs. Frequency 1.2 1.1 1.0 1700 1780 1.2 1.1 1740 1780 1820 Frequency (MHz) 1860 1900 1.0 1700 1740 1780 1820 Frequency (MHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS52-0005 Low Cost Two-Way SMT Power Divider, 1700 - 1900 MHz Rev. V6 SOIC-8† † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.