High IP3 Mixer Rev B Features: • Very High IP3, >+30.0dBm • Small SMT footprint • +18dBm LO drive .490 .227 [5.75]MAX [12.45] .032 [.80] .370 [9.40] Description M/A Com’s MAMXES0080 uses a novel PHEMT FET design to achieve very high linearity without external biasing. .461 [11.71] .415 [10.55] .245 [6.22] .051 [1.30] .075 [1.90] .070 [1.77] .070 .070 [1.77] [1.77] .161 [4.09] .392 [9.96] .185 [4.70] MAMXES0080 1850 - 1910 MHz .221 [5.62] .060 [1.53] .512 [13.01] Dimensions in inches [mm] Tolerance: .xx ± .02, .xxx ± .010 Ordering Information Part Number Package MAMXES0080 Tape & Reel Electrical Specifications: 25°C, Impedance = 50 O Parameter Frequency Range Frequency (MHz) Units Minimum Typical Maximum RF: 1850-1910 LO: 1680-1740 IF: 170 Conversion loss 1850-1910 dB - 8.0 9.5 L-R Isolation 1680-1740 dB 18.0 22.0 - L-I Isolation 1680-1740 dB 25.0 33.0 - R-I Isolation 1680-1740 dB 30.0 37.0 - LO VSWR 1680-1740 - - 2.6 - RF VSWR 1850-1910 - - 2.6 - IF VSWR 100-300 - - 1.4 - Input IP3 Downconverting dBm 30.0 35.0 - dBm - 22.0 - dB - - 10.5 1dB Compression Noise Figure 1 High IP3 Mixer, 1850 — 1910 MHz MAMXES0080 Absolute Maximum Ratings Parameter Pin Configuration Maximum Function Pin # RF input power +22dBm RF 1 Peak IF current 40mA LO 2 Operating temperature -40°C - +85°C IF 3 Storage temperature -40°C - +85°C Ground 4,5,6 Specification subject to change without notice. North America: (800) 366-2266 Asia/Pacific: +81-44-844-8296 Europe: +44 (1344) 869 595 Visit www.macom.com for additional datasheets and information. 2