MA4EX950M-1225T Silicon Double Balanced HMICTM Mixer, 700 - 1200 MHz Features n n n n n n SOT-25 Low Cost Miniature Plastic Package 7.0 dB Typical Conversion Loss +7 to +13 dBm LO Drive HMIC Patented Process Silicon Medium Barrier Schottky Diodes DC - 400 MHz IF Bandwidth V 2.00 SOT-25 Package Outline (Topview) 3 2 1 Topview Description M/A-COM’s MA4EX950M-1225T is a silicon monolithic 700-1200 MHz double balanced mixer in a low cost miniature surface mount SOT-25 package. The die uses M/A-COM’s unique HMICTM silicon/glass process to achieve low loss passive elements while retaining the advantages of medium barrier silicon Schottky diodes. 4 5 PIN Configuration Applications These mixers are well suited for high volume wireless and cellular applications where small size and repeatability are required. Typical applications include frequency conversion, modulation, and demodulation in wireless receivers and transmitters. PIN Function PIN Function 1 RF 4 GND 2 GND 5 IF 3 LO Functional Schematic IF RF LO Absolute Maximum Ratings1 Parameter Absolute Maximum Operating Temperature -65 °C to +125 °C Storage Temperature -65 °C to +150 °C Incident LO Power +20 dBm Incident RF Power +20 dBm Mounting Temperature +235 °C for 10 seconds 1. Exceeding these limits may cause permanent damage. 1 Silicon Double Balanced HMICTM Mixer, 700-1200 MHz MA4EX950M-1225T V 2.00 Electrical Specifications: TA = + 25 °C Parameter Frequency Range Conversion Loss L - R Isolation L - I Isolation R - I Isolation LO VSWR RF VSWR IF VSWR Test Conditions Units Min. Typ. dB Max. 850 MHz LO Drive = +10 dBm 0.7—1.2 GHz RF = -10 dBm, IF = 60 MHz 850 MHz LO Drive = +5 dBm 0.7—1.2 GHz RF Level = -10 dBm 850 MHz LO Drive = +5 dBm 0.7—1.2 GHz RF Level = -10 dBm 850 MHz LO Drive = +5 dBm 0.7—1.2 GHz RF Level = -10 dBm 24.0 850 MHz LO Drive = +5 dBm 1.8:1 - 0.7—1.2 GHz RF Level = -10 dBm 1.8:1 - 850 MHz LO Drive = +5 dBm 1.6:1 - 0.7—1.2 GHz RF Level = -10 dBm 2.5:1 - DC - 400 MHz LO Drive = +5 dBm 1.05:1 - dB 7.0 8.0 8.1 10.5 26.0 20.5 dB 26.5 27.0 dB 27.5 RF Level = -10 dBm Input IP3 Input 1 dB Compression IF 1 dB Bandwidth 850 MHz LO Drive = +3 0.7—1.2 GHz RF = -10 dBm, IF = 60 MHz +7 dBm 850 MHz LO Drive = +3 0.7—1.2 GHz RF = -10 dBm, IF = 60 MHz DC - 400 MHz LO = 4650 MHz @=5 dBm dBm +7 dBm 18.5 20.5 13.0 18.0 dBm 4.3 5.6 MHz 0 400.0 Typical Performance Curves (LO Drive = +10 dBm, RF = -10 dBm, IF = 60 MHz) Conversion Loss Isolation Conversion Loss vs Frequency P L O Drive = 7, 10, 13dBm, P R F = -10dBm, f IF = LS - 60 MHz ISOLATION vs Frequency PLO = +10dBm, fIF = LS - 60 MHz 0.00 -6.00 -6.50 PLO=7dBm -5.00 PLO=10dBm -7.00 (ISO L - I) PLO=13dBm -10.00 -7.50 ISOLATION(dB) (ISO L - R) LOSS (DB) -8.00 -8.50 -9.00 (ISO R - I) -15.00 -20.00 -9.50 -25.00 -10.00 -30.00 -10.50 -11.00 700 725 750 775 800 825 850 875 900 925 950 975 -35.00 1000 1025 1050 1075 1100 1125 1150 1175 1200 700 725 750 775 800 825 850 875 FREQUENCY (MHz) 900 925 950 975 1000 1025 1050 1075 1100 1125 1150 1175 1200 FREQUENCY (MHz) RF and IF VSWR Third Order Intercept and Input 1 dB Compression Power Input IP3 & 1dB Compression Power VSWR TYP P (LO) Drive = 7, 10, 13dBm, P (RF) = -10dBm, f(IF) = LS-60 MHz P (LO) = +10dBm, P (RF) = -10dBm, f(IF) = LS-60 MHz 25 5.00 I -Port 4.50 (ISO L - R) 20 (ISO R - I) 4.00 IP3 & P1dB (dBm) PLO=7dBm VSWR RATIO 3.50 3.00 2.50 15 PLO=10dBm PLO=13dBm Typical 1dB Compression 10 2.00 5 1.50 1.00 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400 425 450 475 500 FREQUENCY (MHz) Specifications subject to change without notice. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. 0 700 750 800 850 900 950 1000 1050 1100 1150 1200 FREQUENCY (MHz) 2 Silicon Double Balanced HMICTM Mixer, 700-1200 MHz MA4EX950M-1225T V 2.00 SOT-25 Package Outline1,2 SOT-25 Dimensions Millimeters Inches Dim Min. Max. .122 Min. 2.70 Max. 3.10 B .100 .118 2.54 3.00 C b .051 b 1.30 A D 1. Dimensions do not include mold flash, protrusion or gate burrs which shall not exceed 0.0098 in (.25mm) per side. 2. Lead Coplanarity is 0.003 (0.08) max. .063 REF. 1.60 REF. E .032 .043 .80 1.10 F .014 .020 .35 .50 G .003 b .08 — H .000 .006 .00 .15 J .018 REF. .45 REF. Ordering Information Part Number MA4EX950M-1225T Package Tape and Reel Specifications subject to change without notice. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. 3