CY3900I / CY3950I Delta39K™⁄Ultra37000™ ISR™ Programming Kits Features Functional Description • Supports Cypress’s Ultra37000™, Ultra37000V™, Delta39K™, and PSI™ families of products • STAPL (Chain Dependent and Chain Independent) programming language support • SVF programming language support • Standard JTAG programming interface • Multi-device programming • Easy to use Windows XP-™, Windows 2000-™, Windows ME-™, Windows 98-™, and Windows NT™-compatible interface • Eliminates programming insertion to improve manufacturing efficiency • For programming in the lab, on manufacturing floor, or at remote sites • ATE support via STAPL on industry leading ATE platforms CY3900I Kit Contents • C3ISR™ Programming Cable[3] for use with Ultra37000, Delta39K, and PSI CPLD families • Delta39K/Ultra37000 prototype board[1] The Delta39K/Ultra37000 ISR Programming Kit enables users to program Ultra37000, Ultra37000V, Delta39K, and PSI CPLDs on board with our ISR Programming Software, the C3ISR or USBISR Programming Cable, and a personal computer. The C3ISR Programming Cable connects to the parallel port of a PC and the USBISR Programming Cable[3] connects to a USB 1.1/USB 2.0 port of a PC into a standard 10-pin male connector mounted on the user’s board. The ISR software provides an easy-to-use Graphical User Interface that accepts JEDEC or hex files as input. The JEDEC/.hex files are used to compose platform independent STAPL/SVF files. STAPL/SVF files contain all the information needed to program the device. The ISR software is used to define how many devices are in the daisy chain and what operation is to be done on each Cypress device. The same chain can be used with other JTAG-compliant devices. The ISR User’s Guide describes the operation of the ISR software. The application notes included with the kit describe all system design considerations for programming with this Programming Kit. 10-pin Programming Connector The view looking into the end of the 10-pin ISR cable is shown below.[2] • ISR application notes CY3950I Kit Contents • USBISR Programming Cable[3] for use with Ultra37000, Delta39K, and PSI CPLD families • Delta39K/Ultra37000 prototype board[1] • ISR application notes In-System Reprogrammable™ (ISR™) Programming (using C3ISR cable[3]) VCC Cypress 10-pin PC Cable 25-pin Device Parallel Port Cypress 10-pin ISR Connector Device Designer’s Board Notes: 1. Cypress reserves the right to substitute prototype boards based on product availability. 2. Refer to the CD-ROM ISR User’s Guide documentation for detailed information on ISR programming and electrical specification requirements. 3. The C3ISR Programming Cable is available in the CY3900I Programming Kit and the USBISR Programming Cable is available in the CY3950I Programming Kit. Cypress Semiconductor Corporation Document #: 38-03009 Rev. *E • 198 Champion Court • San Jose, CA 95134-1709 • 408-943-2600 Revised August 11, 2005 CY3900I / CY3950I In-System Reprogrammable™ (ISR™) Programming (using USBISR cable[3]) VCC Cypress 10-pin Cable PC USB Device USB 1.1 / USB 2.0 Port Cypress Device Designer’s Board 10-pin ISR Connector Table 1. C3ISR / USBISR Cable Pin Descriptions Pin Type Description JTAGen OUTPUT In System Reprogramming JTAG Enable (active HIGH). ISR* OUTPUT In System Reprogramming Enable Indicator (active LOW). VCC INPUT +5V and +3.3V Supply Voltage provided from the target system to the cable. TDO INPUT Test Data Output Receiver. The TDO output pin of the last device in the ISR chain of the system is connected to this input pin. TMS OUTPUT Test Mode Control. This is the mode select control input for the TAP controller state machine contained in the ISR interface. TCK OUTPUT Test Clock. ISR interface clock. TDI OUTPUT Test Data Input Driver. This output pin is connected to the TDI input of the first device in the ISR chain. NC NC No Connect. GND — Zero volt common ground for PC and target system. Table 1 describes the function of each of these pins on the C3ISR and USBISR Programming Cables. An OUTPUT is provided by the PC and an INPUT is provided by the target system. Part Number The dimensions of the male connector required for the C3ISR and the USBISR Programming Cables are given below. To facilitate easy and quick prototyping of designs, a Delta39K/Ultra37000 Prototype Board[4] has been included in the CY3900i Delta39/Ultra37000 ISR Programming Kit. The prototype board comes with a CY37256VP160 device and a CY39100V208 device already premounted and header strips that facilitate signal testing. Detailed information on the board layout and proper usage may be found in the Cypress application note, Using the Delta39K ISR Prototype Board. Male Connector 2 x 5 = 2 rows, 5 pins per row Measuring from center of the pins, each pin is 0.1” from the others. Digi-Key® S2012-05-ND (straight-pin connector). Digi-Key S2112-05-ND (right-angle connector). Pin length is 0.23”. Pin cross-section is 0.025” x 0.025”. Note: 4. See Figure 1 for the basic layout. Document #: 38-03009 Rev. *E Page 2 of 4 CY3900I / CY3950I ISR 10-pin Connector J2 10-pin Connector J3 Header Strips CY39100V208 208-pin TQFP VCCO GND CY37256VP160 Power Connector Header 160-pin TQFP Strips Daisy Chain Jumpers LED VCC GND Power Connector Figure 1. Delta39K/Ultra37000 Prototype Board PC System Requirements • IBM PC or compatible running Windows 98, Windows 98 Second Edition, Windows ME, Windows NT 4.0 Service Pack 5 or later or Windows 2000 Service Pack 1 or later and Windows XP. • One free parallel, USB 1.1 or 2.0 (recommended) port • A minimum of 32 MB of RAM. Ordering Information Product Code Description CY3950I Delta39K/Ultra37000 ISR Programming Kit (with USBISR Programming Cable) CY3900I Delta39K/Ultra37000 ISR Programming Kit (with C3ISR parallel Programming Cable) • Approximately 30 MB of free hard disk space. Windows 98, Windows ME, Windows 2000, Windows NT and Windows XP are trademarks of Microsoft Corporation. Digi-Key is a registered trademark of Digi-Key Corporation. ISR, C3ISR, USBISR, Ultra37000, Delta39K, and PSI are trademarks of Cypress Semiconductor. All products and company names mentioned in this document may be the trademarks of their respective holders. Document #: 38-03009 Rev. *E Page 3 of 4 © Cypress Semiconductor Corporation, 2005. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. CY3900I / CY3950I Document History Page Document Title: Delta39K™/Ultra37000™ ISR™ Programming Kit Document Number: 38-03009 REV. ECN NO. Issue Date Orig. of Change Description of Change ** 108980 08/07/01 HOW New Data Sheet *A 111228 01/23/02 CNH Removed references to Windows 95 *B 127867 08/18/03 FSG Removed Quantum38K from all pages *C 130222 10/09/03 FSG Added CY3950I kit *D 325995 See ECN PCX Updated 10-pin Connector Figure *E 391577 See ECN PCX Deleted ISR Software 4.0 from Kit Contents Document #: 38-03009 Rev. *E Page 4 of 4