TM ISP Engineering Kit Model 100 Features • SUPPORTS ALL ispLSI® 1000, 1000E, 1000EA, 2000/A, 2000E, 2000VL, 2000VE, 2000V, 3000, 5000V AND 8000V DEVICE FAMILY MEMBERS • STAND-ALONE DEVICE PROGRAMMER • DOWNLOAD DIRECTLY TO AN ISP DEVICE ON A SYSTEM BOARD – Only Five Control/Data Pins Needed • QUICK DEVICE PROGRAMMING • INEXPENSIVE, SMALL AND COMPACT – Eliminates Need For Expensive, Remote Programmer • EXCELLENT FOR PROTOTYPING NEW DESIGNS – Not Intended For Production Programming • EASY TO USE • CONNECTS DIRECTLY TO PARALLEL PRINTER PORT OF HOST PC Description ISP Engineering Kit Model 100 The ISP Engineering Kit Model 100 provides designers with a quick and inexpensive means of evaluating and prototyping new designs using Lattice Semiconductor’s in-system programmable Large Scale Integration (ispLSI) devices. This Kit is designed for engineering purposes only and is not intended for production use. The Kit programs devices from the parallel printer port of a host PC using Lattice’s ispLEVER™ Development System software. By connecting a system cable (included) from a host PC to the ISP Engineering Kit, or connecting from the host PC to the target device on the system board, a JEDEC file can be easily downloaded into the ispLSI device(s). UPM Description The Model 100 Universal Programming Module is designed to support all package types available from Lattice. It consists of the following components: • Universal programming module base unit • 110VAC/9VDC at 200mA power supply converter (included for North America and Asia only) • 25-pin parallel port adapter • 6’ system download cable with an RJ-45 telephone style connector at each end Components The connection between the host PC and the UPM base unit is shown in Figure 1. The ISP Engineering Kit Model 100 consists of two primary components, each sold separately: • Universal Programming Module (UPM) • Socket adapters (The adapters plug into the UPM base. The adapter provides the appropriate PLCC, PQFP, TQFP or MQUAD socket for a particular ispLSI device package). Copyright © 2004 Lattice Semiconductor Corp. All brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. LATTICE SEMICONDUCTOR CORP., 5555 Northeast Moore Ct., Hillsboro, Oregon 97124, U.S.A. Tel. (503) 268-8000; 1-800-LATTICE; FAX (503) 268-8556; http://www.latticesemi.com engkit_10 1 February 2004 ISP Engineering Kit Model 100 Electrical Characteristics Product Ordering Information Power Supply (North America and Asia Only) AC Input Voltage: 110 VAC DC Output Voltage: 9 VDC @ 200mA Product Description ISP Engineering Kit Model 100 for the PC (North America and Asia only) Part Number pDS4102-PM ISP Engineering Kit Model 100 for the PC (European Model, No Power Adapter) pDS4102E-PM UPM Physical Characteristics Length: 3.75 inches Width: 2.625 inches Depth: 1.375 inches Technical Support Assistance Hotline: Download Cable e-mail: 1-800-LATTICE (Domestic) 1-408-826-6002 (International) [email protected] System Download Cable with RJ-45 Connectors Length: 6.0 feet (192.8 cm) Connectors: RJ-45 to RJ-45 connector Socket Adapter Information For a complete list of socket adapters for ispLSI devices, see the ispGAL®, ispLSI and ispGDX® Socket Adapters document on the Lattice Data Book CD-ROM or the Lattice web site at www.latticesemi.com. Figure 1. Universal Programming Module Description RJ-45 connector eight positions Download Cable ISP Engineering Kit Socket Adapter (purchased seperately) Programming Module • Sample Device 25-pin parallel port adapter • Power Supply Converter (9VDC) • 25-pin Parallel Port Adapter • 6' Download Cable Place adapter on parallel port behind security key DC Power Plug Power Supply Converter 110VAC/9VDC at 200 mA (North America and Asia Only) Universal Programming Module Base Unit 2.1 mm Positive or Negative +/5.5 mm 0813A 2