CORCOM Product Guide Three Phase External Power Line Filter for Frequency Converters FCD Series UL Recognized FCD10 FCD Series Specifications The FCD filters provide three phase filtering for frequency inverters and variable speed motor drives. Designed for very noisy Delta applications, they attenuate conducted interference at low and high frequency ranges and better protect programmable logic controllers from RF noise on the AC power line. These filters perform best when installed on the line side of the motor drive. The FCD filters better prevent noise from returning to the line, enabling equipment to meet strict European regulations on RFI. Suited for field wiring applications, these filters are ideal for EMC troubleshooting and field refurbishing. The FCD filters feature side flanges for easy mounting and DIN type terminals which eliminate live metal parts, allowing safer and easier connection. They could also be sold as an accessory to motor drives marketed into Europe. Electrical Schematics Maximum leakage current,each line-to-ground 6 Amps 16 Amps @ 120 VAC 60 Hz: @ 250 VAC 50 Hz: Hipot rating (one minute): line-to-ground line-to-line Operating frequency: Rated voltage (max.): 2.9 mA 4.9 mA 25-50 Amps 4.9 mA 7.7 mA 5.7 mA 9.8 mA 2250 VDC 1450 VDC 50/60 Hz 480 VAC phase-to-phase 277 VAC phase-to-neutral/ground Rated current: 06FCD 16FCD 25FCD 36FCD 50FCD 6A 16A 25A 36A 50A Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit 6 Amp LOAD LINE 16, 25, 36 & 50 Amps LINE Current Rating .01 .03 .05 6A 16A 25A 36A 50A 2 13 13 9 9 14 30 30 26 26 23 36 36 32 32 Frequency–MHz .1 .5 1 5 10 30 48 52 52 52 52 45 45 45 45 45 33 35 35 35 35 Frequency–MHz .1 .5 1 5 10 30 48 65 65 65 65 38 60 60 60 60 39 45 45 40 40 56 75 75 75 75 52 75 75 75 75 Line-to-line in 50 ohm circuit LOAD Current Rating .01 6A 16A 25A 36A 50A 9 9 9 9 9 .03 .05 8 13 13 13 13 24 24 26 26 26 40 55 55 46 46 62 75 75 75 75 57 75 75 75 75 50 75 75 75 75 Resistor location for reference only. 60 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Three Phase External Power Line Filter for Frequency Converters (Continued) FCD Series Case Dimensions Slots: .260 6.61 (4) B C A (max) (max) (max) D E (max) F 6.00 4.30 2.30 3.74 5.15 2.756 152.4 109.2 58.4 95.0 128.3 70.0 16FCD10 7.20 182.9 5.48 2.55 4.92 5.94 2.756 139.2 64.8 6.30 2.55 5.71 160.0 64.8 145.0 6.30 2.55 5.71 160.0 64.8 145.0 6.30 2.54 5.71 160.0 64.52 145.0 Part No. 6FCD10 B D RFI Power Line Filters Case Style L I N E LABEL L O A D 25FCD10 9.69 246.1 36FCD10 9.69 246.1 50FCD10 10.5 266.7 124.97 150.9 8.46 70.0 4.528 215.0 115.01 8.46 4.528 215.0 115.01 8.46 4.528 215.0 115.01 F E Part Numbers 06FCD10 16FCD10 25FCD10 36FCD10 50FCD10 C A Note: Terminals No. 8-32 (2) Type (qty.) Torque in. lb. 6FCD10, 16FCD10 VDFK4 (6) 5.31 min. Phoenix contacts Accepts 12 AWG stranded wire. Strip length 0.315 25FCD10, 36FCD10 Phoenix contacts VDFK6 (6) 13.28 min. Accepts 10 AWG stranded wire. Strip length 0.354 50FCD10 Phoenix contacts HDFK10-VP (6) 13.28 min Accepts 8 AWG stranded wire. Strip length 0.433 61 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com