MIL-C-24308 D-Subminiature 557-113 D-Subminiature Solid Banding Backshell With Qwik-Ty® 557 T 113 M 2 31 B Basic Part No. B = Band Supplied (600-052), Omit for None Cable Entry Style T = Top S = Side B = 45° Cable Entry (Table II) Shell Size (Table I) Finish Symbol (Page 3) Basic Part Number H* G* .40 (10.2) .05 Typ. (1.3) Typ J* E END ENTRY * Typ. T TOP ENTRY .42 (10.7) Typ. S SIDE ENTRY F E C Connector Shown For Reference Only Socket Head Jackscrew #4-40 UNC 2A (2 Places) .25 (6.4) Typ. A D B © 2004 Glenair, Inc. 1.50 (38.1) CAGE Code 06324 B 45° ENTRY Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-68 MIL-C-24308 D-Subminiature 557-113 D-Subminiature Solid Banding Backshell With Qwik-Ty® TABLE I: SHELL SIZE, BACKSHELL & CONNECTOR INTERFACE DIMENSIONS Shell Size 1 2 3 4 5 D A 1.25 1.58 2.13 2.77 2.68 Max (31.8) (40.1) (54.1) (70.4) (68.1) .53 .53 .53 .53 .66 B (13.5) (13.5) (13.5) (13.5) (16.8) .75 .75 1.00 1.00 1.25 C (19.1) (19.1) (25.4) (25.4) (31.8) ±.005 .984 1.312 1.852 2.500 2.406 (.1) (25.0) (33.3) (47.0) (63.5) (61.1) 1.25 1.25 1.25 1.25 1.38 E (31.8) (31.8) (31.8) (31.8) (35.1) 1.88 1.88 1.88 1.88 2.13 F (47.8) (47.8) (47.8) (47.8) (54.1) TABLE II: CABLE ENTRY Dash G Dia H Dia No. .268 (6.8) .299 (7.6) 16 .330 (8.4) .361 (9.2) 23 .392 (10.0) .423 (10.7) 30 .455 (11.6) .486 (12.3) 31 .517 (13.1) .548 (13.9) 32 .642 (16.3) .673 (17.1) 33* * Available in Shell Size 5 only. J Dia .188 (4.8) .250 (6.4) .312 (7.9) .375 (9.5) .438 (11.1) .562 (14.3) Metric dimensions (mm) are indicated in parentheses. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-69