MIL-C-24308 D-Subminiature 557-102 and 557-103 D-Subminiature 45° Entry Light-Weight Solid Banding Backshell 557-102 M 2-03 C B Basic Part No. 557-102 or 557-103 B = Band Supplied (600-057), Omit for None Finish Symbol (Page 3) C = Supplied with Retainer Clips and Jackscrews (Omit for None) Shell Size (Table I) Cable Entry (Table II) “C” Retainer Clip Option C C .1565 (4.0) ±.0025 (.1) Dia 2 Places .012 (.3) Ref. E D .109 (2.8) Radius 4 Places Note 2 1.66 (42.2) Max .012 (.3) Ref. Note 2 E D 1.66 (42.2) Max 1.375 (34.9) 1.375 (34.9) .035 (.9) .035 (.9) A A B B 557-103 557-102 TABLE I: SHELL SIZE AND CONNECTOR INTERFACE DIMENSIONS Shell Size 1 2 3 4 5 C A Max 1.203 (30.6) 1.531 (38.9) 2.078 (52.8) 2.718 (69.0) 2.625 (66.7) B .500 .500 .500 .500 .609 (12.7) (12.7) (12.7) (12.7) (15.5) ±.005 .984 1.312 1.852 2.500 2.406 (.1) (25.0) (33.3) (47.0) (63.5) (61.1) 1. Metric dimensions (mm) are indicated in parentheses. 2. End Fitting may be brazed on per MIL-B-7883B, Type V, Grade B © 2004 Glenair, Inc. CAGE Code 06324 TABLE II: CABLE ENTRY Entry D E Size .125 (3.2) .205 (5.2) 02 .187 (4.7) .267 (6.8) 03 .250 (6.4) .330 (8.4) 04 .312 (7.9) .392 (10.0) 05 .375 (9.5) .455 (11.6) 06 .437 (11.1) .517 (13.1) 07 08* .500 (12.7) .580 (14.7) 09* .529 (13.4) .609 (15.5) .290 (7.4) .370 (9.4) 10 * Available in shell size 5 only. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-62