SERIES 28 HiPer-D® Accessories EMI Backshell, one-piece, environmental 289T008 top entry, 289S008 side entry 289-008 backshell provides watertight EMI protection for HiPer-D® connectors. Fits standard HiPer-D® pin and socket connectors (280-018P, 280-019S) and Combo HiPer-D® connectors (280-046P and 280-047S). Available with top entry or side entry. Terminate cable shield with optional Band-Master™ATS clamping band. Elliptical cable entry provides room for large wire bundles. Backshell consists of solid one piece housing, two stainless steel hex head jackscrews, two jackscrew retainer clips and silicone rubber sealing gasket. Aluminum or stainless steel. Use with Glenair Series 77 heat-shrink boot. Entry Style Ordering Information Sample Part Number Fig. 1 Fig. 2 Top Entry 289T008 Side Entry 289S008 Qwik Ty™ Option Slot Option QWIK TY Fig. 3 Qwik Ty™ E Fig. 5 Long Side Entry (1) E F E-8 A T Finish ME = Electroless Nickel (RoHS) MT = Nickel-PTFE (RoHS) JF = Cadmium with Yellow Chromate Z2 = Gold (RoHS) Z1 = Passivated Stainless Steel (RoHS) Shell Size 1 = Shell Size 1 2 = Shell Size 2 3 = Shell Size 3 4 = Shell Size 4 5 = Shell Size 5 6 = Shell Size 6 Entry Size A, B, C or D See Cable Entry Size Table Below Qwik Ty™ Option N = Supplied without Qwik Ty™ T = With Qwik Ty™ Strain Relief (Fig. 3) Slot Option N = Supplied without Slots S = With Slots for Terminating Individual Shields (Fig. 4) EMI/RFI Band N = Supplied without Band K = Supplied with Pre-Coiled Band (600-052-1) S K 2 Omit for 289T008. Applies only to 289S008. 1 = Cable Exit on Long Side of Shell Keystone (Fig. 5) 2 = Cable Exit on Short Side of Shell Keystone (Fig. 6) Cable Entry Direction Fig. 6 6 289T008 = Top Entry (Fig. 1) 289S008 = Side Entry (Fig. 2) Slots Cable Entry Direction JF Basic Part Number SLOT Fig. 4 289S008 Short Side Entry (2) Shell Size 1 2 3 4 5 6 Entry Size A E F In. mm In. mm .143 .188 .245 .291 .326 .376 3.63 4.78 6.22 7.39 8.28 9.55 .143 .188 .245 .291 .326 .376 3.63 4.78 6.22 7.39 8.28 9.55 Cable Entry Size Entry Size B E F In. mm In. mm .195 .256 .550 .800 .770 .863 4.95 6.50 13.97 20.32 19.56 21.92 Entry Size C E F In. mm In. mm .195 4.95 .242 .256 6.50 .480 .375 9.53 .780 .375 9.53 1.260 .485 12.32 1.250 .550 13.97 1.323 6.15 12.19 19.81 32.00 31.75 33.60 © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 Entry Size D E F In. mm In. mm .242 6.15 .438 .375 9.53 .688 .375 9.53 1.125 .375 9.53 1.813 .485 12.32 1.750 .550 13.97 1.875 11.13 17.48 28.58 46.05 44.45 47.63 .375 9.53 .375 9.53 .375 9.53 .375 9.53 .485 12.32 .550 13.97 Rev. 6-2014 SERIES 28 HiPer-D® Accessories EMI Backshell, one-piece, environmental 289T008 top entry 289T008 DIMENSIONS A C B OPTIONAL QUIK-TY LEG OPTIONAL SLOT 2 PLCS .41 (10.4) .08 (2.0) .50 (12.7) .135 (3.4) SHRINK BOOT GROOVE 1.25 (31.8) A RETAINER CLIP AND HEX. SOCKET HEAD JACKSCREWS .26 REF. E E F Shell Size 1 2 3 4 5 6 E-9 In. mm In. mm In. mm Dimensions Entry Size A Entry Size B E F E F In. mm In. mm In. mm In. mm 1.395 1.706 2.265 2.900 2.800 2.900 35.43 43.33 57.53 73.66 71.12 73.66 .624 .624 .624 .624 .750 .844 15.85 15.85 15.85 15.85 19.05 21.44 .984 1.312 1.852 2.500 2.406 2.500 24.99 33.32 47.04 63.50 61.11 63.50 .143 .188 .245 .291 .326 .376 A Max B Max C Basic 3.63 4.78 6.22 7.39 8.28 9.55 .143 .188 .245 .291 .326 .376 3.63 4.78 6.22 7.39 8.28 9.55 .195 .256 .550 .800 .770 .863 4.95 6.50 13.97 20.32 19.56 21.92 Entry Size C E F In. mm In. mm .195 4.95 .242 .256 6.50 .480 .375 9.53 .780 .375 9.53 1.260 .485 12.32 1.250 .550 13.97 1.323 6.15 12.19 19.81 32.00 31.75 33.60 © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 Entry Size D E F In. mm In. mm .242 6.15 .438 .375 9.53 .688 .375 9.53 1.125 .375 9.53 1.813 .485 12.32 1.750 .550 13.97 1.875 11.13 17.48 28.58 46.05 44.45 47.63 .375 9.53 .375 9.53 .375 9.53 .375 9.53 .485 12.32 .550 13.97 Rev. 6-2014 SERIES 28 HiPer-D® Accessories EMI Backshell, one-piece, environmental 289S008 side entry 289S008 DIMENSIONS Cable Exit Direction Direction 2 A Direction 1 C SLOT OPTION B .060 (1.5) QUIK-TY OPTION .50 (12.7) .41 (10.4) .135 (3.43) SHRINK BOOT GROOVE E F 1.94 (49.2) .26 (6.6) REF. CAPTIVATED, HEX HEAD JACKSCREWS CONNECTOR SHOWN FOR REF. ONLY (SEE 280-018P & 280-019S) E Shell Size 1 2 3 4 5 6 E-10 A Max In. mm 1.395 1.706 2.265 2.900 2.800 2.900 35.43 43.33 57.53 73.66 71.12 73.66 B Max In. mm .624 .624 .624 .624 .750 .844 15.85 15.85 15.85 15.85 19.05 21.44 C Basic In. mm .984 1.312 1.852 2.500 2.406 2.500 24.99 33.32 47.04 63.50 61.11 63.50 Dimensions Entry Size A Entry Size B E F E F In. mm In. mm In. mm In. mm .143 .188 .245 .291 .326 .376 3.63 4.78 6.22 7.39 8.28 9.55 .143 .188 .245 .291 .326 .376 3.63 4.78 6.22 7.39 8.28 9.55 .195 .256 .550 .800 .770 .863 4.95 6.50 13.97 20.32 19.56 21.92 Entry Size C E F In. mm In. mm .195 4.95 .242 .256 6.50 .480 .375 9.53 .780 .375 9.53 1.260 .485 12.32 1.250 .550 13.97 1.323 6.15 12.19 19.81 32.00 31.75 33.60 © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 Entry Size D E F In. mm In. mm .242 6.15 .438 .375 9.53 .688 .375 9.53 1.125 .375 9.53 1.813 .485 12.32 1.750 .550 13.97 1.875 11.13 17.48 28.58 46.05 44.45 47.63 .375 9.53 .375 9.53 .375 9.53 .375 9.53 .485 12.32 .550 13.97