Series 74 Convoluted Tubing 712-389 - Types B, C, D, E, F & G User-Installable Bulkhead Fitting for Series 74 Helical Convoluted Tubing 712-389 M 20 C D TYPES B, C, D, E, F, & G BULKHEAD Product Series Mounting Flats D = D-Hole (Omit for None) Basic No. Conduit Type (B, C, D, E, F or G) Finish (Table III) Dash No. (Tables I & II) C .188 (4.8) D .590 (15.0) MAX TYP O-RING .945 (24.0) MAX TUBING F I.D. MAX B MTG HOLE TYP E MAX A THREAD TYP .125 (3.2) MAX PANEL THICKNESS C FLATS TYPICAL TYPES C & F ENVIRONMENTAL F REF E REF TYPE G ENVIRONMENTAL TYPES B, D, & E NON-ENVIRONMENTAL © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] D-24 Series 74 Convoluted Tubing 712-389 - Types B, C, D, E, F & G User-Installable Bulkhead Fitting for Series 74 Helical Convoluted Tubing TABLE I B DASH NO. 06 09 10 12 14 16 20 24 28 32 40 48 56 64 DASH NO. 06 09 10 12 14 16 20 24 28 32 40 48 56 64 TUBING I.D. MIN MAX .181 (4.6) .188 (4.8) .273 (6.9) .281 (7.1) .306 (7.8) .312 (7.9) .364 (9.2) .375 (9.5) .427 (10.8) .437 (11.1) .485 (12.3) .500 (12.7) .608 (15.4) .625 (15.9) .730 (18.5) .750 (19.1) .860 (21.8) .875 (22.2) .975 (24.8) 1.000 (25.4) 1.205 (30.6) 1.250 (31.8) 1.437 (36.5) 1.500 (38.1) 1.688 (42.9) 1.750 (44.5) 1.937 (49.2) 2.000 (50.8) TABLE II E MAX 1.09 (27.7) 1.16 (29.5) 1.22 (31.0) 1.28 (32.5) 1.34 (34.0) 1.41 (35.8) 1.53 (38.9) 1.66 (42.2) 1.78 (45.2) 1.91 (48.5) 2.28 (57.9) 2.59 (65.8) 2.91 (73.9) 3.03 (77.0) A THREAD CLASS 2A 7/16 - 28 UNEF 9/16 - 24 UNEF 9/16 - 24 UNEF 5/8 - 24 UNEF 11/16 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 - 20 UNEF 1 3/16 - 18 UNEF 1 5/16 - 18 UNEF 1 1/2 - 18 UNEF 1 3/4 - 18 UNS 2 - 18 UNS 2 1/4 - 16 UN +.03 -.00 .44 .50 .56 .63 .69 .75 .88 1.00 1.19 1.31 1.50 1.75 2.00 2.25 (0.8) (0.0) (11.2) (12.7) (14.2) (16.0) (17.5) (19.1) (22.4) (25.4) (30.2) (33.3) (38.1) (44.5) (50.8) (57.2) C ACROSS FLAT .937 (23.8) 1.000 (25.4) 1.062 (27.0) 1.125 (28.6) 1.187 (30.1) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 2.125 (54.0) 2.437 (61.9) 2.750 (69.9) 2.875 (73.0) D +.000 -.015 .375 .500 .500 .563 .625 .688 .812 .938 1.125 1.250 1.438 1.688 1.938 2.188 (0.0) (0.4) (9.5) (12.7) (12.7) (14.3) (15.9) (17.5) (20.6) (23.8) (28.6) (31.8) (36.5) (42.9) (49.2) (55.6) TABLE III F MAX .78 (19.8) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.22 (31.0) 1.28 (32.5) 1.41 (35.8) 1.53 (38.9) 1.71 (43.4) 1.84 (46.7) 2.16 (54.9) 2.46 (62.5) 2.78 (70.6) 3.03 (77.0) SYMBOL FINISH B Olive Drab over Cadmium Plate J Gold Iridite over Cadmium Plate over Nickel M Electroless Nickel N Olive Drab over Cadmium Plate over Nickel NC Zinc-Cobalt, Olive Drab NF Olive Drab over Cadmium Plate over Electroless Nickel (500 Hour Salt Spray) T Bright Dip Cadmium Plate over Nickel NOTES: 1. Metric dimensions (mm) are in parentheses. 2. Tubing shown for reference only. © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] D-25