Amplifier, Power, 1W 5.0-9.0 GHz MAAPGM0030 903239 — Preliminary Information Features ♦ 1 Watt Saturated Output Power Level ♦ Variable Drain Voltage (4-10V) Operation ♦ MSAG™ Process APGM0030 YWWLLLL Primary Applications ♦ Multiple Band Point-to-Point Radio ♦ SatCom ♦ ISM Band Description The MAAPGM0030 is a packaged, single stage, 1W power amplifier with on-chip bias networks in a bolt down ceramic package, allowing easy assembly. This product is fully matched to 50 ohms on both the input and output. It can be used as a power amplifier stage or as a driver stage in high power applications. Pin Number RF Designator 1 No Connection 2 No Connection 3 RF IN 4 No Connection 5 VGG 6 No Connection 7 No Connection Each device is 100% RF tested to ensure performance compliance. The part is fabricated using M/A-COM’s GaAs Multifunction Self-Aligned Gate (MSAG™) Process. M/A-COM’s MSAG™ process features robust silicon-like manufacturing processes, planar processing of ion implanted transistors and multiple implant capability enabling power, lownoise, switch and digital FETs on a single chip. The use of refractory metals and the absence of platinum in the gate metal formulation prevents hydrogen poisoning when employed in hermetic packaging. 8 RF OUT 9 No Connection 10 VDD Absolute Maximum Conditions 1 Parameter Symbol Absolute Maximum Units Input Power PIN 23.0 dBm Drain Supply Voltage VDD +12.0 V Gate Supply Voltage VGG -3.0 V Quiescent Drain Current (No RF, 40% Idss) IDQ 470 mA PDISS 3.2 W Junction Temperature TJ 180 °C Storage Temperature TSTG -55 to +150 °C 230 °C Quiescent DC Power Dissipated (No RF) Processing Temperature 1. Operation outside of these ranges may reduce product reliability. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Amplifier, Power, 1W 5.0-9.0 GHz MAAPGM0030 903239 — Preliminary Information Recommended Operating Conditions Min Typ Max Unit Drain Supply Voltage Characteristic Symbol VDD 4.0 8.0 10.0 V Gate Supply Voltage VGG -2.4 -2.0 -1.5 V 21 dBm 150 °C Input Power PIN Junction Temperature TJ Thermal Resistance ΘJC Package Base Temperature TB 18 28.4 °C/W Note 2 °C 2. Maximum Package Base Temperature = 150°C — ΘJC* VDD * IDQ Electrical Characteristics: TB = 40°C, Z0 = 50 Ω, VDD = 8V, IDQ ≈ 300 mA3, Pin = 18 dBm, RG ≈ 240 Ω Parameter Symbol Typical Units Bandwidth f 5.0-9.0 GHz Output Power POUT 30 dBm Power Added Efficiency PAE 35 % 1-dB Compression Point P1dB 30 dBm Small Signal Gain G 14 dB Input VSWR VSWR 1.8:1 Output VSWR VSWR 2.0:1 Gate Supply Current IGG <4 mA Drain Supply Current IDD < 500 mA Noise Figure NF 9 dB 2nd Harmonic 2f -20 dBc 3rd Harmonic 3f -35 dBc Output Third Order Intercept OTOI 38 dBm 3 Order Intermodulation Distortion, Single Carrier Level = 21 dBm IM3 -15 dBm 5th Order Intermodulation Distortion, Single Carrier Level = 21 dBm IM5 -36 dBm rd 3. Adjust VGG between –2.4 to –1.5V to achieve indicated IDQ. Operating Instructions This device is static sensitive. Please handle with care. To operate the device, follow these steps. 1. Apply VGG ≈ -1.8V, VDD= 0 V. 2. Ramp VDD to desired voltage, typically 8 V. 3. Adjust VGG to set IDQ, (See Note 3 above). 4. Set RF input. 5. Power down sequence in reverse. Turn VGG off last. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Amplifier, Power, 1W 5.0-9.0 GHz MAAPGM0030 903239 — Preliminary Information 50 50 50 50 POUT POUT PAE 40 40 40 30 30 30 30 20 20 20 20 10 10 10 10 0 PAE(%) POUT (dBm) PAE 40 0 4 5 6 7 8 9 10 0 0 4 Frequency (GHz) 5 6 7 8 9 10 Drain Voltage (V) Figure 1. Output Power and Power Added Efficiency vs. Frequency at VDD = 8V and Pin = 18 dBm. Figure 2. Saturated Output Power and Power Added Efficiency vs. Drain Voltage at fo = 7 GHz. 30 50 VDD = 4 VDD = 6 VDD = 8 VDD = 10 6 Gain Input VSWR Output VSWR 40 25 30 20 4 20 15 3 10 10 2 0 5 5 4 5 6 7 8 9 Frequency (GHz) Figure 3. 1dB Compression Point vs. Drain Voltage 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. 10 1 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 Frequency (GHz) Figure 4. Small Signal Gain and VSWR vs. Frequency at VDD = 8V. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Amplifier, Power, 1W 5.0-9.0 GHz MAAPGM0030 903239 — Preliminary Information APGM0030 Figure 5. CR-15 Package Dimensions The CR-15 is a high frequency, low thermal resistance package. The package consists of a cofired ceramic construction with a copper-tungsten base and iron-nickel-cobalt leads. The finish consists of electrolytic gold over nickel plate. 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Amplifier, Power, 1W 5.0-9.0 GHz MAAPGM0030 903239 — Preliminary Information V DD 0.1 μ F RG See Electrical Characteristics- Page 2 APGM0030 YWWLLLL RFIN RFOUT VGG 0.1 μF Figure 6. Recommended Bias Configuration Pin Number RF Designator 1 No Connection 2 No Connection 3 RF IN 4 No Connection 5 VGG 6 No Connection 7 No Connection 8 RF OUT 9 No Connection 10 VDD Assembly Instructions: This flange mount style package provides a robust interface between a highly integrated GaAs MMIC device and a circuit board which may be assembled using conventional surface mount techniques. A thin shim made of a thermally and electrically conductive, ductile material should be used prior to installation of the CR-15 to improve the thermal and electrical performance of the package to housing interface. Refer to M/A-COM Application Note #M567* for more information . For applications where surface mount components are to be installed after the CR-15 installation, this package will not be damaged when subjected to typical convection or IR oven reflow profiles. Refer to M/A-COM Application Note #M538* for maximum allowable reflow time and temperature. Alternatively, the package leads may be individually soldered. Whether an iron or hot gas soldering equipment is used, care should be taken to insure that the temperature is well controlled and electric static discharge (ESD) safe. * Application Notes can be found by going to the Site Search Page on M/A-COM’s web page (http://www.macom.com/search/search.jsp) and searching for the required Application Note. Biasing Notes: ♦ A negative bias must be applied to VGG before applying a positive bias to VDD to prevent damage to the amplifier. 5 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.