MAFLCC0001 Low Cost SMT Dual Band Diplexer AMPS/PCS and GSM/DCS Features • Small Size and Low Profile • Superior Repeatability • Passbands 824 – 960 MHz and 1850 – 1990 MHz • Passbands 880 – 960 MHz and 1700 – 1900 MHz • Typical Passband Insertion Loss: 0.5 dB • 2 Watt Power Handling • Low Cost • Lead-Free SO-8 Package • 100% Matte Tin Plating over Copper • Halogen-Free “Green” Mold Compound • 260°C Reflow Compatible • RoHS* Compliant Version of DP52-0002 Rev. V2 Functional Block Diagram1,2 Description M/A-COM’s MAFLCC0001 is an IC-based monolithic diplexer in a low cost SOIC-8 SMT plastic package. This diplexer is ideally suited for applications where small size, low insertion loss, superior repeatability, and low cost are required. Typical applications include AMPS/PCS and GSM/DCS dual mode portable devices. The MAFLCC0001 is fabricated using a passiveintegrated circuit process. The process features fullchip pssivation for increased performance and reliability. 1. 2. All unused pins must be RF and DC grounded. Pins 1 and 4 are thermal ground contacts. Pin Configuration Pin No. Function Pin No. Function 1 GND 5 PCS IN/OUT 2 AMPS IN/OUT 6 GND 3 GND 7 ANTENNA 4 GND 8 GND Ordering Information Part Number Package MAFLCC0001 Bulk Packaging MAFLCC0001-TR 1000 piece reel MAFLCC0001-TB Sample Test Board Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAFLCC0001 Low Cost SMT Dual Band Diplexer AMPS/PCS and GSM/DCS Rev. V2 824 – 960 / 1850 – 1990 MHz Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Units Min Typ Max Passband Insertion Loss dB — 0.5 0.8 Stopband Isolation dB 12 18 — Passband VSWR — — 1.4:1 1.7:1 880 – 960 / 1700 – 1900 MHz Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Units Min Typ Max Passband Insertion Loss dB — 0.5 0.9 Stopband Isolation dB 12 18 — Passband VSWR — — 1.5:1 1.8:1 Absolute Maximum Ratings 3,4 3. 4. Parameter Absolute Maximum Input Power 2W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Recommended PCB Configuration 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAFLCC0001 Low Cost SMT Dual Band Diplexer AMPS/PCS and GSM/DCS Rev. V2 Typical Performance Curves Insertion Loss vs. Frequency VSWR vs. Frequency 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAFLCC0001 Low Cost SMT Dual Band Diplexer AMPS/PCS and GSM/DCS Rev. V2 Lead-Free, SOIC-8† † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.