80D Vishay Sprague Aluminum Capacitors + 85 °C, Snap-In FEATURES • High ripple capability Pb-free • Molded cover available in 2 and 3 terminal design with standoffs Available Fig.1 Component Outlines QUICK REFERENCE DATA DESCRIPTION RIPPLE CURRENT MULTIPLIERS VALUE Nominal case size ØD x L in mm TEMPERATURE 0.866" x 0.984" (22.0 x 25.0) to 1.38" x 3.15" (35.0 x 80.0) Operating temperature AMBIENT TEMPERATURE MULTIPLIERS + 55 °C + 65 °C + 75 °C + 85 °C 2.0 1.7 1.4 1.0 - 40 °C to + 85 °C Rated capacitance range, CR 82 µF to 56 000 µF Tolerance on CR - 10 %, + 30 % Rated voltage range, UR 6.3 WVDC to 250 WVDC FREQUENCY (Hz) Snap mount or 2 and 3 terminal straight leads Termination Life validation test at 85°C 2000 h: Δ CAP ≤ 15 % from initial measurement. Δ ESR ≤ 1.5 x initial specified limit. Δ DCL ≤ initial specified limit Shelf life at 85°C 500 h: Δ CAP ≤ 15 % from initial measurement. Δ ESR ≤ 1.3 x initial specified limit. Δ DCL ≤ 2 x initial specified limit WVDC 0 - 49 50 - 199 200 - 250 50 TO 60 300 TO 1000 1000 AND UP 0.85 0.83 0.80 1.10 1.15 1.30 1.15 1.20 1.40 ESL (TYPICAL VALUES AT 1 MHz TO 10 MHz) Nominal Diameter 0.866 (22.0) 0.984 (25.0) 1.18 (30.0) 1.38 (35.0) Typical ESL (nH) 6.0 8.0 10.0 12.0 I = K cv DC leakage current K = 4.0 at + 25 °C I in µA, C in µF, V in Volts DIMENSIONS in inches (millimeters) DIAMETER LENGTH L ± 0.079 (2.0) CASE CODE D + 0.039 - 0 (+ 1.0 - 0) L ± 0.079 (2.0) 1.00 (25.0) KC 1.18 (30.0) 1.38 (35.0) 1.18 (30.0) KD 1.18 (30.0) 1.57 (40.0) CASE CODE DIAMETER LENGTH D + 0.039 - 0 (+1.0 - 0) HA 0.87 (22.0) HB 0.87 (22.0) HD 0.87 (22.0) 1.57 (40.0) KE 1.18 (30.0) 2.00 (50.0) JA 1.00 (25.0) 1.00 (25.0) MB 1.38 (35.0) 1.18 (30.0) JB 1.00 (25.0) 1.18 (30.0) MC 1.38 (35.0) 1.38 (35.0) JC 1.00 (25.0) 1.38 (35.0) MD 1.38 (35.0) 1.57 (40.0) JD 1.00 (25.0) 1.57 (40.0) ME 1.38 (35.0) 2.00 (50.0) JE 1.00 (25.0) 2.00 (50.0) MF 1.38 (35.0) 2.50 (63.0) KA 1.18 (30.0) 1.00 (25.0) MG 1.38 (35.0) 3.18 (80.0) KB 1.18 (30.0) 1.18 (30.0) www.vishay.com 218 For technical questions, contact: [email protected] Document Number: 42060 Revision: 27-Aug-08 80D Aluminum Capacitors + 85 °C, Snap-In Vishay Sprague DIMENSIONS in inches (millimeters) CIRCUIT BOARD MOUNT TERMINAL DIMENSIONS (1) DIAMETER STYLE A STYLE B D CASE CODE B R C R 1.00 (25.0) J 0.093 (2.4) 0.301 (7.6) 140° N/A 1.18 (30.0) K 0.125 (2.3) 0.363 (9.2) 120° 0.391 (9.9) (2) 1.38 (35.0) M 0.125 (3.2) 0.458 (11.6) 120° 0.458 (11.6) (2) Notes (1) Style A and B not available in 0.866" (22.0mm) diameter units (2) Pin-type molded cover available on 80D/82D through 450 V. For 81D, only up through 250 V. DIMENSIONAL AND AVAILABLE FORMS Style A Style B Style D Document Number: 42060 Revision: 27-Aug-08 For technical questions, contact: [email protected] www.vishay.com 219 80D Aluminum Capacitors + 85 °C, Snap-In Vishay Sprague ORDERING EXAMPLE Electrolytic capacitor 80D series: 80D 122 P 200 ME 2 D E3 DESCRIPTION CODE EXPLANATION 80D product type 122 capacitance value (1200 µF) P tolerance (P = - 10 %/+ 30 %) 200 voltage rating at 85 °C (200 V) MA can size (see dimensions table) 2 pvc insulating sleeve D terminal style (D = 2 pin snap-in) E3 RoHS compliant ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (µF) PART NUMBER NOMINAL CASE SIZE DxL MAX. ESR 120 HZ 10 kHZ to 40 kHZ MAX. RIPPLE at + 85°C (A) 120 HZ 10 kHZ to 40 kHZ 16 WVDC at + 85 °C, SURGE = 20 V 3900.0 (1) 5600.0 8200.0 8200.0 80D392P016HA2D 0.866 x 0.984 (22.0 x 25.0) 113.0 99.0 2.5 2.8 80D562P016HB2D 80D822P016JB2D 80D822P016KA2D 0.866 x 1.18 (22.0 x 30.0) 0.984 x 1.18 (25.0 x 30.0) 1.18 x 0.984 (30.0 x 25.0) 85.0 73.0 91.0 74.0 65.0 84.0 3.0 3.3 2.8 3.4 3.6 3.0 10 000.0 (1) 80D103P016JC2D 0.984 x 1.38 (25.0 x 35.0) 59.0 53.0 3.9 4.2 15 000.0 (1) 22 000.0 80D153P016JE2D 0.984 x 1.97 (25.0 x 50.0) 37.0 33.0 5.6 6.0 80D223P016KE2D 1.18 x 1.97 (30.0 x 50.0) 35.0 32.0 5.8 6.1 33 000.0 (1) 80D333P016ME2D 1.38 x 1.97 (35.0 x 50.0) 19.0 17.0 9.4 10.0 99.0 2.4 2.8 25 WVDC at + 85 °C, SURGE = 30 V 2700.0 (1) 80D272P025HA2D (1) 3300.0 4700.0 80D332P025HB2D 0.866 x 1.18 (22.0 x 30.0) 90.0 74.0 2.9 3.4 80D427P025JB2D 0.984 x 1.18 (25.0 x 30.0) 76.0 65.0 3.2 3.6 6800.0 (1) 80D682P025KB2D 1.18 x 1.18 (30.0 x 30.0) 71.0 63.0 3.4 3.6 10 000.0 (1) 80D103P025JE2D 0.984 x 1.97 (25.0 x 50.0) 39.0 33.0 5.4 6.0 10 000.0 (1) 80D103P025MB2D 1.38 x 1.18 (35.0 x 30.0) 38.0 33.0 5.5 6.2 15 000.0 (1) 80D153P025KE2D 1.18 x 1.97 (30.0 x 50.0) 36.0 32.0 5.7 6.1 (1) 80D223P025ME2D 1.38 x 1.97 (35.0 x 50.0) 19.0 17.0 9.1 10.0 3.4 22 000.0 0.866 x 0.984 (22.0 x 25.0) 120.0 35 WVDC at + 85 °C, SURGE = 44 V 0.866 x 1.18 (22.0 x 30.0) 96.0 3300.0 80D332P035HB2D 74.0 2.7 4700.0 (1) 80D472P035KB2D 1.18 x 1.18 (30.0 x 30.0) - - - - 6800.0 (1) 80D682P035KC2D 1.18 x 1.38 (30.0 x 35.0) 60.0 51.0 3.8 4.2 10 000.0 (1) 7.2 80D103P035MC2D 1.38 x 1.38 (35.0 x 35.0) 33.0 27.0 6.2 (1) 80D123P035KE2D 1.38 x 1.38 (35.0 x 35.0) 33.0 27.0 6.2 7.2 15 000.0 (1) 80D153P035ME2D 1.38 x 1.97 (35.0 x 35.0) 20.0 17.0 8.8 10.0 1200.0 (1) 1500.0 80D122P050HA2D 0.866 x 0.984 (22.0 x 25.0) 144.0 99.0 2.8 2.0 80D152P050HB2D 0.866 x 1.18 (22.0 x 30.0) 108.0 74.0 2.4 3.4 2200.0 (1) 80D222P050HD2D 0.866 x 1.57 (22.0 x 40.0) 69.0 48.0 3.4 4.7 3300.0 (1) 80D332P050JD2D 0.984 x 1.57 (25.0 x 40.0) 57.0 42.0 3.9 4.9 3300.0 (1) 80D332P050KB2D 1.18 x 1.18 (30.0 x 30.0) 79.0 63.0 3.1 3.6 4700.0 (1) 80D472P050KD2D 1.18 x 1.57 (30.0 x 40.0) 51.0 41.0 4.3 4.9 6800.0 (1) 80D682P050KE2D 1.18 x 1.97 (30.0 x 50.0) 40.0 32.0 5.3 6.1 12 000.0 50 WVDC at + 85 °C, SURGE = 63 V www.vishay.com 220 For technical questions, contact: [email protected] Document Number: 42060 Revision: 27-Aug-08 80D Aluminum Capacitors + 85 °C, Snap-In Vishay Sprague ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (µF) NOMINAL CASE SIZE DxL PART NUMBER MAX. ESR 120 HZ 10 kHZ to 40 kHZ MAX. RIPPLE at + 85°C (A) 120 HZ 10 kHZ to 40 kHZ 63 WVDC at + 85 °C, SURGE = 79 V 820.0 80D821P063HA2D 0.866 x 0.984 (22.0 x 25.0) 132.0 82.0 2.0 3.0 1200.0 (1) 80D122P063HB2D 0.866 x 1.18 (22.0 x 30.0) 99.0 62.0 2.4 3.6 1500.0 80D152P063JB2D 0.984 x 1.18 (25.0 x 30.0) 82.0 55.0 2.8 3.8 2200.0 80D222P063KB2D 1.18 x 1.18 (30.0 x 30.0) 72.0 54.0 3.2 3.9 (1) 80D332P063MB2D 1.38 x 1.18 (35.0 x 30.0) 40.0 28.0 5.0 6.6 4700.0 (1) 80D472P063KE2D 1.18 x 1.97 (30.0 x 50.0) 36.0 28.0 5.4 6.4 6800.0 (1) 80D682P063ME2D 1.38 x 1.97 (35.0 x 50.0) 21.0 15.0 8.3 10.0 390.0 80D391P100HA2D 0.866 x 0.984 (22.0 x 25.0) 241.0 138.0 1.5 2.7 560.0 80D561P100HB2D 0.866 x 1.18 (22.0 x 30.0) 179.0 103.0 1.8 3.3 680.0 80D681P100JB2D 0.984 x 1.18 (25.0 x 30.0) 139.0 85.0 2.2 3.5 1000.0 80D102P100KB2D 1.18 x 1.18 (30.0 x 30.0) 111.0 74.0 2.7 3.7 1500.0 80D152P100JE2D 0.984 x 1.97 (25.0 x 25.0) 68.0 42.0 3.9 5.9 2200.0 80D222P100KE2D 1.18 x 1.97 (30.0 x 50.0) 55.0 37.0 4.7 6.2 3300.0 80D332P100ME2D 1.38 x 1.97 (35.0 x 50.0) 50.0 37.0 5.2 6.2 3300.0 100 WVDC at + 85 °C, SURGE = 125 V 200 WVDC at + 85 °C, SURGE = 250 V 100.0 80D101P200HA2D 0.866 x 0.984 (22.0 x 25.0) 1057.0 505.0 0.75 2.2 150.0 80D151P200JA2D 0.984 x 0.984 (25.0 x 25.0) 660.0 375.0 1.3 3.2 220.0 (1) 80D221P200KA2D 1.18 x 0.984 (30.0 x 25.0) 460.0 272.0 1.7 3.6 (1) 80D331P200KC2D 1.18 x 1.38 (30.0 x 35.0) 278.0 165.0 2.4 4.9 470.0 (1) 80D471P200KD2D 1.18 x 1.57 (30.0 x 40.0) 220.0 131.0 2.8 5.7 680.0 80D681P200KD2D 1.18 x 1.57 (30.0 x 40.0) 248.0 127.0 2.1 4.7 330.0 (1) 80D821P200ME2D 1.38 x 1.97 (35.0 x 35.0) 130.0 82.0 4.3 7.4 1000.0 (1) 80D102P200ME2D 1.38 x 1.97 (35.0 x 50.0) 144.0 81.0 3.4 6.6 1200.0 (1) 80D122P200ME2D 1.38 x 1.97 (35.0 x 50.0) 141.0 75.0 3.4 6.6 100.0 (1) 80D101P250JA2D 0.984 x 0.984 (25.0 x 25.0) 720.0 377.0 1.1 3.2 150.0 80D151P250JB2D 0.984 x 1.18 (25.0 x 30.0) 541.0 284.0 1.4 3.8 220.0 (1) 80D221P250JD2D 0.984 x 1.57 (25.0 x 40.0) 343.0 182.0 2.0 5.2 330.0 80D331P250JE2D 0.984 x 1.97 (25.0 x 50.0) 263.0 140.0 2.5 6.3 470.0 80D471P250KE2D 1.18 x 1.97 (30.0 x 50.0) 185.0 101.0 3.2 7.0 680.0 (1) 80D681P250ME2D 1.38 x 1.97 (35.0 x 50.0) 191.0 81.0 4.0 7.4 820.0 250 WVDC at + 85 °C, SURGE = 300 V Note (1) These ratings are normally stocked. Some Inventory may include PVC sleeve with resin end seal (5D). Additional Part Numbers normally found in distribution inventory include: 80D102P050HA2D 80D182P035HA2D 80D332P063JE2D 80D682P035JE2D 80D102P063HB2D 80D222P035HB2D 80D333P010KE2D 80D682P035MB2D 80D102P100JD2D 80D222P050KA2D 80D391P200MB2D 80D682P050MD2D 80D102P200MD2D 80D222P063JD2D 80D392P050JE2D 80D820P250HA2D 80D103P035KE2D 80D222P080JE2D 80D472P050JC2D 80D822P025JD2D 80D123P016KB2D 80D223P010MB2D 80D472P050JE2D 80D822P035MB2D 80D152P050JA2D 80D272P035HB2D 80D472P050MB2D 80D822P050ME2D 80D153P016MB2D 80D272P035JA2D 80D681P200MD2D Other capacitance values are available on request. Call for a quotation for price and delivery. Document Number: 42060 Revision: 27-Aug-08 For technical questions, contact: [email protected] www.vishay.com 221 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1