82D Vishay Sprague Aluminum Capacitors + 85 °C, Snap-In, General Purpose FEATURES • Economical Pb-free • General purpose design Available • Wide voltage range Fig.1 Component Outlines QUICK REFERENCE DATA DESCRIPTION RIPPLE CURRENT MULTIPLIERS VALUE Nominal case size ØD x L in mm TEMPERATURE 0.87" x 1.00" (22.0 x 25.0) to 1.38" x 3.15" (35.0 x 80.0) AMBIENT TEMPERATURE MULTIPLIERS - 40 °C to + 85 °C + 55 °C 2.0 + 65 °C 1.7 + 75 °C 1.4 + 85 °C 1.0 Operating temperature Rated capacitance range, CR 39 µF to 180 000 µF Tolerance on CR ± 20 % Rated voltage range, UR 6.3 WVDC to 450 WVDC Termination FREQUENCY (Hz) Snap in Life validation test at 85 °C Shelf life at 85 °C 2000 hours: Δ CAP ≤ 15 % from initial measurement. Δ ESR ≤ 1.5 x initial specified limit. Δ DCL ≤ initial specified limit 500 hours: Δ CAP ≤ 15 % from initial measurement. Δ ESR ≤ 1.3 x initial specified limit. Δ DCL ≤ 2 x initial specified limit I = K CV DC leakage current K = 4.0 at + 25 °C I in µA, C in µF, V in Volts WVDC 50 TO 60 300 TO 1000 1000 AND UP 16 - 49 0.85 1.10 1.15 50 - 199 0.83 1.15 1.20 200 - 400 0.80 1.30 1.40 ESL (TYPICAL VALUES AT 1 MHz TO 10 MHz) Nominal Diameter 0.87 (22.0) 0.98 (25.0) 1.18 (30.0) 1.38 (35.0) Typical ESL (nH) 6.0 8.0 10.0 12.0 DIMENSIONS in inches (millimeters) CASE CODE DIAMETER LENGTH LENGTH L ± 0.08 (2.0) CASE CODE DIAMETER D + 0.04 - 0 (+ 1.0 - 0) D + 0.04 - 0 (+ 1.0 - 0) L ± 0.08 (2.0) HA 0.87 (22.0) 1.00 (25.0) KC 1.18 (30.0) 1.38 (35.0) 1.57 (40.0) HB 0.87 (22.0) 1.18 (30.0) KD 1.18 (30.0) HD 0.87 (22.0) 1.57 (40.0) KE 1.18 (30.0) 2.00 (50.0) JA 1.00 (25.0) 1.00 (25.0) MB 1.38 (35.0) 1.18 (30.0) JB 1.00 (25.0) 1.18 (30.0) MC 1.38 (35.0) 1.38 (35.0) JC 1.00 (25.0) 1.38 (35.0) MD 1.38 (35.0) 1.57 (40.0) 2.00 (50.0) JD 1.00 (25.0) 1.57 (40.0) ME 1.38 (35.0) JE 1.00 (25.0) 2.00 (50.0) MF 1.38 (35.0) 2.50 (63.0) KA 1.18 (30.0) 1.00 (25.0) MG 1.38 (35.0) 3.18 (80.0) KB 1.18 (30.0) 1.18 (30.0) www.vishay.com 222 For technical questions, contact: [email protected] Document Number: 42062 Revision: 27-Aug-08 82D Aluminum Capacitors + 85 °C, Snap-In, General Purpose Vishay Sprague DIMENSIONS in inches (millimeters) CIRCUIT BOARD MOUNT TERMINAL DIMENSIONS (1) DIAMETER STYLE A STYLE B D CASE CODE B R C R 1.00 (25.0) J 0.093 (2.4) 0.301 (7.6) 140° N/A 1.18 (30.0) K 0.125 (3.2) 0.363 (9.2) 120° 0.391 (9.9) 1.38 (35.0) M 0.125 (3.2) 0.458 (11.6) 120° 0.458 (11.6) Note (1) Style A and B not available in 0.87" (22.0mm) diameter units DIMENSIONS AND AVAILABLE FORMS Style A Style B Style D Document Number: 42062 Revision: 27-Aug-08 For technical questions, contact: [email protected] www.vishay.com 223 82D Aluminum Capacitors + 85 °C, Snap-In, General Purpose Vishay Sprague TERMINAL CONFIGURATION (numbers in brackets indicate millimeters) OUTLINE DRAWINGS AVAILABLE DIAMETERS AVAILABLE VOLTAGES AND TYPES D Standard 2 pin snap-in 0.87 (22.0) - H 0.98 (25.0) - J 1.18 (30.0) - K 1.38 (35.0) - M All voltages 81D, 81DA 82D, 82DA A 2 straight wire lead molded cover with standoffs 0.98 (25.0) - J 1.18 (30.0) - K 1.38 (35.0) - M B 3 straight wire lead molded cover with standoffs LEAD CODE DESCRIPTION MOUNTING CONFIGURATION TERMINAL CONFIGURATION + All voltages 82D, 82DA V ≤ 250 VDC 81D, 81DA All voltages 82D, 82DA + 1.18 (30.0) - K 1.38 (35.0) - M V ≤ 250 VDC 81D, 81DA ORDERING EXAMPLE Electrolytic capacitor 82D series: 82D 122 M 050 HA 2 D E3 DESCRIPTION CODE EXPLANATION 82D product type 122 capacitance value (1200 µF) M tolerance (M = ± 20 %) 50 voltage rating at 85 °C (50 V) HA can size (see dimensions table) 2 pvc insulating sleeve D terminal style (D = 2 pin snap-in) E3 RoHS compliant ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (µF) PART NUMBER NOMINAL CASE SIZE DxL MAX. ESR at 25 °C (mΩ) 120 HZ MAX. RIPPLE at + 85 °C (A) 20 to 40 kHZ 120 HZ 20 to 40 kHZ 16 WVDC at + 85 °C, SURGE = 20 V 10 000.0 82D103M016HB2D 0.866 x 1.181 (22.0 x 30.0) 86.0 63.0 2.38 2.80 15 000.0 82D153M016HD2D 0.866 x 1.575 (22.0 x 40.0) 57.7 42.0 3.25 3.83 (1) 82D153M016JC2D 0.984 x 1.378 (25.0 x 35.0) 58.0 43.0 3.33 3.87 22 000.0 82D223M016KB2D 1.181 x 1.181 (30.0 x 30.0) 53.7 41.0 3.70 4.20 33 000.0 82D333M016KD2D 1.181 x 1.575 (30.0 x 40.0) 35.3 27.0 5.00 5.77 33 000.0 82D333M016MC2D 1.378 x 1.378 (35.0 x 35.0) 28.0 21.0 5.96 6.87 47 000.0 82D473M016MD2D 1.378 x 1.575 (35.0 x 40.0) 23.0 17.0 6.86 6.65 15 000.0 www.vishay.com 224 For technical questions, contact: [email protected] Document Number: 42062 Revision: 27-Aug-08 82D Aluminum Capacitors + 85 °C, Snap-In, General Purpose Vishay Sprague ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (µF) PART NUMBER NOMINAL CASE SIZE DxL MAX. ESR at 25 °C (mΩ) 120 HZ 20 to 40 kHZ MAX. RIPPLE at + 85 °C (A) 120 HZ 20 to 40 kHZ 25 WVDC at + 85 °C, SURGE = 30 V 3300.0 82D332M025HA2D 0.866 x 0.984 (22.0 x 25.0) 110.0 76.0 1.98 2.39 4700.0 (1) 82D472M025HB2D 0.866 x 1.181 (22.0 x 30.0) 85.0 58.0 2.40 2.91 3.49 6800.0 82D682M025JB2D 0.984 x 1.181 (25.0 x 30.0) 67.0 47.0 2.94 10 000.0 82D103M025JD2D 0.984 x 1.545 (25.0 x 40.0) 43.4 31.0 4.22 4.96 15 000.0 82D153M025JE2D 0.984 x 1.969 (25.0 x 50.0) 33.9 24.0 4.97 5.96 6800.0 82D682M025KA2D 1.181 x 0.984 (30.0 x 25.0) 71.0 54.0 3.00 3.47 10 000.0 82D103M025KB2D 1.181 x 1.181 (30.0 x 30.0) 54.0 41.0 3.70 4.20 15 000.0 82D153M025KD2D 1.181 x 1.575 (30.0 x 40.0) 36.4 27.0 5.00 5.77 22 000.0 82D223M025MD2D 1.378 x 1.575 (35.0 x 40.0) 23.0 17.0 6.84 7.96 2.39 35 WVDC at + 85 °C, SURGE = 40 V 2200.0 82D222M035HA2D 0.866 x 0.984 (22.0 x 25.0) 121.0 76.0 1.88 3300.0 82D332M035HB2D 0.866 x 1.181 (22.0 x 30.0) 92.0 57.0 2.30 2.94 4700.0 82D472M035JB2D 0.984 x 1.181 (25.0 x 30.0) 72.0 47.0 2.82 3.49 6800.0 82D682M035JD2D 0.984 x 1.575 (25.0 x 40.0) 46.6 30.0 4.08 5.08 10000.0 82D103M035JE2D 0.984 x 1.969 (25.0 x 50.0) 36.3 24.0 4.87 5.96 4700.0 82D472M035KA2D 1.181 x 0.984 (30.0 x 25.0) 75.0 54.0 2.92 3.42 12 000.0 82D123M035KD2D 1.181 x 1.575 (30.0 x 40.0) 37.7 27.0 4.89 5.77 82D103M035MB2D 1.378 x 1.181 (35.0 x 30.0) 36.0 24.0 4.97 6.10 82D153M035MD2D 1.378 x 1.575 (35.0 x 40.0) 25.0 16.3 6.57 8.13 2.32 10 000.0 (1) 15 000.0 50 WVDC at + 85 °C, SURGE = 63 V 1200.0 82D122M050HA2D 0.866 x 0.984 (22.0 x 25.0) 148.0 79.0 1.71 1800.0 82D182M050HB2D 0.866 x 1.181 (22.0 x 30.0) 108.0 58.0 2.12 2.90 2200.0 82D222M050JB2D 0.984 x 1.181 (25.0 x 30.0) 85.0 48.0 2.61 3.49 3900.0 82D392M050JD2D 0.984 x 1.575 (25.0 x 40.0) 53.6 31.0 3.79 4.96 2700.0 82D272M050KA2D 1.181 x 0.984 (30.0 x 25.0) 85.0 54.0 2.73 3.42 4700.0 (1) 82D472M050MB2D 1.378 x 1.181 (35.0 x 30.0) 43.0 24.0 4.56 6.10 6800.0 82D682M050MD2D 1.378 x 1.575 (35.0 x 40.0) 28.0 16.0 6.21 8.21 10 000.0 82D103M050ME2D 1.378 x 1.969 (35.0 x 50.0) 22.0 13.0 7.60 9.87 75.0 1.69 2.39 63 WVDC at + 85 °C, SURGE = 79 V 1000.0 (1) 82D102M063HA2D 0.866 x 0.984 (22.0 x 25.0) 151.0 1500.0 82D152M063JA2D 0.984 x 0.984 (25.0 x 25.0) 121.0 63.0 2.05 2.86 2200.0 82D222M063JC2D 0.984 x 1.378 (25.0 x 35.0) 72.0 38.0 2.97 4.09 3300.0 82D332M063JD2D 0.984 x 1.575 (25.0 x 40.0) 57.0 30.0 3.69 5.08 3300.0 82D332M063KB2D 1.181 x 1.181 (30.0 x 30.0) 68.0 41.0 3.28 4.20 6800.0 82D682M063KE2D 1.181 x 1.969 (30.0 x 50.0) 34.0 22.0 5.56 6.89 4700.0 82D472M063MC2D 1.378 x 1.378 (35.0 x 35.0) 36.0 20.0 5.24 7.04 100 WVDC at + 85 °C, SURGE = 125 V 470.0 82D471M100HB2D 0.866 x 1.181 (22.0 x 30.0) 258.0 114.0 1.37 2.07 680.0 82D681M100JB2D 0.984 x 1.181 (25.0 x 30.0) 188.0 86.0 1.75 2.59 1000.0 82D102M100KB2D 1.181 x 1.181 (30.0 x 30.0) 136.0 66.0 2.31 3.31 1500.0 82D152M100KC2D 1.181 x 1.378 (30.0 x 35.0) 106.0 52.0 2.75 3.95 2200.0 82D222M100KE2D 1.181 x 1.969 (30.0 x 50.0) 66.0 33.0 4.02 5.69 Document Number: 42062 Revision: 27-Aug-08 For technical questions, contact: [email protected] www.vishay.com 225 82D Aluminum Capacitors + 85 °C, Snap-In, General Purpose Vishay Sprague ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (µF) PART NUMBER NOMINAL CASE SIZE DxL MAX. ESR at 25 °C (mΩ) 120 HZ 20 to 40 kHZ MAX. RIPPLE at + 85 °C (A) 120 HZ 20 to 40 kHZ 200 WVDC at + 85 °C, SURGE = 250V 150.0 82D151M200HA2D 0.866 x 0.984 (22.0 x 25.0) 1012.0 361.0 0.697 1.17 220.0 82D221M200HB2D 0.866 x 1.181 (22.0 x 30.0) 594.0 255.0 0.967 1.48 330.0 82D331M200HD2D 0.866 x 1.575 (22.0 x 40.0) 381.0 165.0 1.35 2.06 220.0 82D221M200JA2D 0.984 x 0.984 (25.0 x 25.0) 625.0 272.0 0.967 1.46 470.0 82D471M200JD2D 0.984 x 1.575 (25.0 x 40.0) 271.0 121.0 1.79 2.68 330.0 82D331M200KA2D 1.181 x 0.984 (30.0 x 25.0) 498.0 192.0 1.21 1.96 470.0 82D471M200KB2D 1.181 x 1.181 (30.0 x 30.0) 294.0 136.0 1.64 2.48 680.0 82D681M200KD2D 1.181 x 1575 (30.0 x 40.0) 221.0 87.0 2.14 3.41 1000.0 82D102M200KE2D 1.181 x 1.969 (30.0 x 50.0) 142.0 67.0 2.89 4.22 820.0 82D821M200MC2D 1.378 x 1.378 (35.0 x 35.0) 189.0 93.0 2.46 3.51 1000.0 82D102M200MD2D 1.378 x 1.575 (35.0 x 40.0) 149.0 74.0 2.88 3.41 120.0 82D121M250HA2D 0.866 x 0.984 (22.0 x 25.0) 1077.0 385.0 68.00 1.17 180.0 82D181M250HB2D 0.866 x 1.181 (22.0 x 30.0) 722.0 261.0 88.00 1.52 220.0 82D221M250JB2D 0.984 x 1.181 (25.0 x 30.0) 513.0 189.0 1.13 1.94 330.0 82D331M250JD2D 0.984 x 1.575 (25.0 x 40.0) 382.0 121.0 1.51 2.79 470.0 82D471M250MB2D 1.378 x 1.181 (35.0 x 30.0) 281.0 117.0 1.92 3.07 680.0 82D681M250MD2D 1.378 x 1.575 (35.0 x 40.0) 209.0 74.0 2.43 4.26 1000.0 82D102M250ME2D 1.378 x 1.969 (35.0 x 50.0) 132.0 58.0 3.32 5.21 47.0 82D470M400HA2D 0.866 x 0.984 (22.0 x 25.0) 4310.0 2450.0 0.34 0.45 0.58 250 WVDC at + 85 °C, SURGE = 300V 400 WVDC at + 85°C, SURGE = 450 V 68.0 82D680M400JA2D 0.984 x 0.984 (25.0 x 25.0) 3020.0 1720.0 0.44 100.0 82D101M400JB2D 0.984 x 1.181 (25.0 x 30.0) 2060.0 1176.0 0.56 0.74 150.0 82D151M400KB2D 1.181 x 1.181 (30.0 x 30.0) 1430.0 820.0 0.76 1.00 220.0 82D221M400KD2D 1.181 x 1.575 (30.0 x 40.0) 820.0 470.0 1.10 1.46 330.0 82D331M400MD2D 1.378 x 1.575 (35.0 x 40.0) 630.0 360.0 1.39 1.85 450 WVDC at + 85°C, SURGE = 500 V 39.0 82D390M450HA2D 0.866 x 0.984 (22.0 x 25.0) 4690.0 2460.0 0.32 0.45 56.0 82D560M450JA2D 0.984 x 0.984 (25.0 x 25.0) 3280.0 1730.0 0.42 0.58 100.0 82D101M450JC2D 0.984 x 1.378 (25.0 x 35.0) 1730.0 915.0 0.65 0.89 150.0 82D151M450KC2D 1.181 x 1.378 (30.0 x 35.0) 1150.0 610.0 0.89 1.22 220.0 82D221M450MC2D 1.378 x 1.378 (35.0 x 35.0) 870.0 460.0 1.14 1.56 330.0 82D331M450ME2D 1.378 x 1.969 (35.0 x 50.0) 510.0 274.0 1.68 2.29 Note • Additional Part Numbers in stock include 82D222M050HD2D, 82D472M050JE2D and 82D681M250MD2D. Many other capacitance ratings and voltages are available upon request. Please call for a quotation. www.vishay.com 226 For technical questions, contact: [email protected] Document Number: 42062 Revision: 27-Aug-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1