81D Vishay Sprague Aluminum Capacitors + 105 °C, Snap-In FEATURES • Operating temperature to + 105 °C Pb-free • High ripple current capability Available • Low ESR Fig.1 Component Outlines QUICK REFERENCE DATA DESCRIPTION RIPPLE CURRENT MULTIPLIERS TEMPERATURE VALUE Nominal case size Ø D x L in mm 0.87" x 1.00" (22.0 x 25.0) to 1.38" x 3.15" (35.0 x 80.0) AMBIENT TEMPERATURE MULTIPLIERS + 55 °C 1.6 - 40 °C to + 105 °C + 65 °C 1.4 68 µF to 47 000 µF + 75 °C 1.2 Operating temperature Rated capacitance range CR Capacitance tolerance ± 20 % Voltage rating 16 WVDC to 400 WVDC Termination + 85 °C 1.0 + 95 °C 0.70 + 105 °C Snap mount Life validation test at 105 °C Shelf life at 85 °C 2000 h: Δ CAP ≤ 15 % from initial measurement. Δ ESR ≤ 1.3 x initial specified limit. Δ DCL ≤ initial specified limit 500 h: Δ CAP ≤ 15 % from initial measurement. Δ ESR ≤ 1.3 x initial specified limit. Δ DCL ≤ 2 x initial specified limit I = K CV DC leakage current K = 4.0 at + 25 °C I in µA, C in µF, V in Volts 0.50 FREQUENCY (Hz) WVDC 50 TO 60 300 TO 1000 1000 AND UP 0 - 49 0.85 1.10 1.15 50 - 199 0.83 1.15 1.20 200 - 250 0.80 1.30 1.40 ESL (TYPICAL VALUES AT 1 MHz TO 10 MHz) Nominal Diameter 0.87 (22.0) 0.98 (25.0) 1.18 (30.0) 1.38 (35.0) Typical ESL (nH) 6.0 8.0 10.0 12.0 DIMENSIONS in inches (millimeters) CASE CODE DIAMETER LENGTH LENGTH L ± 0.08 (2.0) CASE CODE DIAMETER D + 0.04 - 0 (+ 1.0 - 0) D + 0.04 - 0 (+ 1.0 - 0) L ± 0.08 (2.0) HA 0.87 (22.0) 1.00 (25.0) KC 1.18 (30.0) 1.38 (35.0) HB 0.87 (22.0) 1.18 (30.0) KD 1.18 (30.0) 1.57 (40.0) HD 0.87 (22.0) 1.57 (40.0) KE 1.18 (30.0) 2.00 (50.0) JA 1.00 (25.0) 1.00 (25.0) MB 1.38 (35.0) 1.18 (30.0) JB 1.00 (25.0) 1.18 (30.0) MC 1.38 (35.0) 1.38 (35.0) JC 1.00 (25.0) 1.38 (35.0) MD 1.38 (35.0) 1.57 (40.0) 2.00 (50.0) JD 1.00 (25.0) 1.57 (40.0) ME 1.38 (35.0) JE 1.00 (25.0) 2.00 (50.0) MF 1.38 (35.0) 2.50 (63.0) KA 1.18 (30.0) 1.00 (25.0) MG 1.38 (35.0) 3.18 (80.0) KB 1.18 (30.0) 1.18 (30.0) www.vishay.com 230 For technical questions, contact: [email protected] Document Number: 42061 Revision: 25-Aug-08 81D Aluminum Capacitors + 105 °C, Snap-In Vishay Sprague DIMENSIONS in inches (millimeters) CIRCUIT BOARD MOUNT TERMINAL DIMENSIONS (1) DIAMETER STYLE A STYLE B D CASE CODE B R C R 1.00 (25.0) J 0.093 (2.4) 0.301 (7.6) 140° N/A 1.18 (30.0) K 0.125 (3.2) 0.363 (9.2) 120° 0.391 (9.9) 1.38 (35.0) M 0.125 (3.2) 0.458 (11.6) 120° 0.458 (11.6) Note (1) Style A and B not available in 0.87" (22.0 mm) diameter units DIMENSIONS AND AVAILABLE FORMS Style A Style B Style D Document Number: 42061 Revision: 25-Aug-08 For technical questions, contact: [email protected] www.vishay.com 231 81D Aluminum Capacitors + 105 °C, Snap-In Vishay Sprague TERMINAL CONFIGURATION (numbers in brackets indicate millimeters) OUTLINE DRAWINGS LEAD CODE DESCRIPTION D Standard 2 pin snap-in A B MOUNTING CONFIGURATION 2 straight wire lead molded cover with standoffs TERMINAL CONFIGURATION AVAILABLE VOLTAGES AND TYPES 0.87 (22.0) - H 0.98 (25.0) - J 1.18 (30.0) - K 1.38 (35.0) - M All voltages 81D, 81DA 82D, 82DA All voltages 82D, 82DA 0.98 (25.0) - J 1.18 (30.0) - K 1.38 (35.0) - M + 3 straight wire lead molded cover with standoffs AVAILABLE DIAMETERS V ≤ 250 VDC 81D, 81DA All voltages 82D, 82DA + 1.18 (30.0) - K 1.38 (35.0) - M V ≤ 250 VDC 81D, 81DA ORDERING EXAMPLE Electrolytic capacitor 81D series: 81D 221 M 250 HD 2 D E3 DESCRIPTION CODE EXPLANATION 81D product type 221 capacitance value (220 µF) M tolerance (M = ± 20 %) 250 voltage rating at 105 °C (250 V) HD can size (see dimensions table) 2 pvc insulating sleeve D terminal style (D = 2 pin snap-in) E3 RoHS compliant ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (µF) PART NUMBER NOMINAL CASE SIZE DxL MAX. ESR at 25 °C (mΩ) 120 HZ 20 to 40 kHZ MAX. RIPPLE at + 85 °C (A) 120 HZ 20 to 40 kHZ 16 WVDC at + 105 °C, SURGE = 20 V 15 000.0 81D153M016JC2D 0.984 x 1.378 (25.0 x 35.0) 58.0 43.0 4.72 5.47 22 000.0 81D223M016KB2D 1.181 x 1.181 (30.0 x 30.0) 53.7 41.0 5.24 5.94 33 000.0 81D333M016MC2D 1.378 x 1.378 (35.0 x 35.0) 28.0 21.0 8.42 9.71 47 000.0 81D473M016MD2D 1.378 x 1.575 (35.0 x 40.0) 23.0 17.0 9.70 11.20 3300.0 81D332M025HA2D 0.866 x 0.984 (22.0 x 25.0) 110.0 76.0 2.81 3.38 4700.0 81D472M025JA2D 0.984 x 0.984 (25.0 x 25.0) 86.0 60.0 3.44 4.15 6800.0 81D682M025KA2D 1.181 x 0.984 (30.0 x 25.0) 71.0 54.0 4.25 4.91 10 000.0 81D103M025KB2D 1.181 x 1.181 (30.0 x 30.0) 54.0 41.0 5.24 5.94 15 000.0 81D153M025KD2D 1.181 x 1.575 (30.0 x 40.0) 36.4 27.0 7.07 8.16 81D223M025MD2D 1.378 x 1.575 (35.0 x 40.0) 23.0 17.0 9.41 11.20 25 WVDC at + 105 °C, SURGE = 30 V 22 000.0 (1) www.vishay.com 232 For technical questions, contact: [email protected] Document Number: 42061 Revision: 25-Aug-08 81D Aluminum Capacitors + 105 °C, Snap-In Vishay Sprague ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (µF) PART NUMBER NOMINAL CASE SIZE DxL MAX. ESR at 25 °C (mΩ) 120 HZ MAX. RIPPLE at + 85 °C (A) 20 to 40 kHZ 120 HZ 20 to 40 kHZ 35 WVDC at + 105 °C, SURGE = 40 V 4700.0 81D472M035KA2D 1.181 x 0.984 (30.0 x 25.0) 75.0 54.0 4.13 4.84 6800.0 81D682M035KB2D 1.181 x 1.181 (30.0 x 30.0) 57.0 41.0 5.10 5.94 12 000.0 81D123M035KD2D 1.181 x 1.575 (30.0 x 40.0) 37.7 27.0 6.92 8.16 10 000.0 81D103M035MB2D 1.378 x 1.181 (35.0 x 30.0) 36.0 24.0 7.04 8.63 79.0 2.41 3.29 50 WVDC at + 105 °C, SURGE = 63 V 1200.0 81D122M050HA2D 0.866 x 0.984 (22.0 x 25.0) 148.0 2200.0 81D222M050JB2D 0.984 x 1.181 (25.0 x 30.0) 85.0 48.0 3.69 4.93 4700.0 81D472M050KC2D 1.181 x 1.378 (30.0 x 35.0) 53.0 33.0 5.51 7.05 6800.0 (1) 81D682M050KE2D 1.181 x 1.969 (30.0 x 50.0) 33.0 22.0 8.04 9.74 63 WVDC at + 105 °C, SURGE = 79 V 1000.0 81D102M063HA2D 0.866 x 0.984 (22.0 x 25.0) 151.0 75.0 2.39 3.39 1500.0 81D152M063HB2D 0.866 x 1.181 (22.0 x 30.0) 118.0 59.0 2.87 4.06 2200.0 81D222M063JC2D 0.984 x 1.378 (25.0 x 35.0) 72.0 38.0 4.21 5.78 4700.0 81D472M063KD2D 1.181 x 1.575 (30.0 x 40.0) 44.0 27.0 6.32 8.16 470.0 81D471M100HB2D 0.866 x 1.181 (22.0 x 30.0) 258.0 114.0 1.94 2.93 680.0 81D681M100JB2D 0.984 x 1.181 (25.0 x 30.0) 188.0 86.0 2.48 3.67 100 WVDC at + 105 °C, SURGE = 125 V 1000.0 81D102M100KB2D 1.181 x 1.181 (30.0 x 30.0) 136.0 66.0 3.28 4.69 1500.0 81D152M100KC2D 1.181 x 1.378 (30.0 x 35.0) 106.0 52.0 3.90 5.59 2200.0 (1) 81D222M100KE2D 1.181 x 1.969 (30.0 x 50.0) 66.0 33.0 5.69 8.05 200 WVDC at + 105 °C, SURGE = 250V 220.0 81D221M200JA2D 0.984 x 0.984 (25.0 x 25.0) 625.0 272.0 1.37 2.08 330.0 81D331M200KA2D 1.181 x 0.984 (30.0 x 25.0) 498.0 192.0 1.71 2.77 470.0 81D471M200KB2D 1.181 x 1.181 (30.0 x 30.0) 294.0 136.0 2.39 3.51 1000.0 81D102M200KE2D 1.181 x 1.969 (30.0 x 50.0) 142.0 67.0 4.09 5.95 820.0 81D821M200MC2D 1.378 x 1.378 (35.0 x 35.0) 189.0 93.0 3.47 4.94 1000.0 (1) 81D102M200MD2D 1.378 x 1.575 (35.0 x 40.0) 149.0 74.0 4.07 5.78 2.89 250 WVDC at + 105 °C, SURGE = 300V 220.0 81D221M250HD2D 0.866 x 1.575 (22.0 x 40.0) 558.0 166.0 1.57 330.0 81D331M250JD2D 0.984 x 1.575 (25.0 x 40.0) 382.0 121.0 2.12 3.81 470.0 81D471M250JE2D 0.984 x 1.969 (25.0 x 25.0) 243.0 93.0 2.81 4.54 680.0 81D681M250KE2D 1.181 x 1.969 (30.0 x 50.0) 198.0 67.0 3.47 5.99 81D102M250ME2D 1.378 x 1.969 (35.0 x 50.0) 132.0 58.0 4.69 7.07 0.707 1000.0 (1) 400 WVDC at + 105 °C, SURGE = 450V 68.0 81D680M400HB2D 0.866 x 1.181 (22.0 x 30.0) 3550.0 1890.0 0.536 100.0 81D101M400JB2D 0.984 x 1.181 (25.0 x 30.0) 2920.0 1550.0 0.683 0.902 150.0 81D151M400JD2D 0.984 x 1.575 (25.0 x 40.0) 1650.0 880.0 1.000 1.1329 220.0 81D221M400KD2D 1.181 x 1.575 (30.0 x 40.0) 1110.0 580.0 1.476 1.781 330.0 81D331M400MD2D 1.378 x 1.575 (35.0 x 40.0) 730.0 390.0 1.695 2.257 Note (1) These ratings are normally stocked Document Number: 42061 Revision: 25-Aug-08 For technical questions, contact: [email protected] www.vishay.com 233 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1