VISHAY Vishay Semiconductors Tape and Reel Standards Package Available Packaging 10´´ tape & reel 13´´ tape & reel Ammo Pack #1 Ammo Pack #2 Quantity / Reel Quantity / Reel Quantity / Box Quantity / Box SOD57 5.000 SOD64 2.500 5.000 2.500 DO204AP(G1) 4.500 3.000 G3 1.600 1.000 G4 2.000 2.000 Taping Specifications SOD57 and SOD64 Package Description Symbol Component Pitch A Specification (mm) 5.0 ± 0.5 Inside Tape Spacing B 52 + 2 mm - 1 mm Lead to Lead Eccentricity ID1-D2I 1.4 max Lead Extension K 0 Lead Bending M 1.2 max 2.0 per 10 pitch Cumulative Pitch P Exposed Adhesive S 0.8 max Tape Width T 6.0 ± 0.4 Tape Leader Beginning and end of reel or ammo pack. 300.0 min Empty Spaces Consecutive missing components not allowed < 0.1 % Polarity Marking All polarized components shall be oriented in the same direction. The cathode tape shall be colored, and anode tape shall be white or light beige. 0.8 (0.031) max. |D1 – D2| = 1.4 (0.055) max. D1 K D2 S A 0.8 (0.031) max. E P B 6.0 ± 0.4 (0.236 ± 0.0157) T W Dimensions A, M, K, P, S and T apply to both sides 15802 Figure 1. Document Number 84068 Rev. 7, 07-Jan-03 www.vishay.com 1 VISHAY Vishay Semiconductors Taping Specification DO204AP(G1), G3 and G4 Packages Package Component Spacing ‘‘A‘‘ (Lead to Lead) Inside Tape Spacing‘‘B“ Cumulative Pitch Tolerance DO204AP(G1) 5.0 mm + 0.5 mm (0.197‘‘ ± 0.020‘‘) 52.4 mm + 1.5 mm/ - 0.4 mm (2.062‘‘ + 0.059‘‘/ - 0.016‘‘) G3, G4 10 mm + 0.5 mm (0.394‘‘ ± 0.020‘‘) 52.4 mm + 1.5 mm/ - 0.4 mm (2.062‘‘ + 0.059‘‘/ - 0.016‘‘) Not to Exceed 1.5 mm (0.059‘‘) over 6 Consecutive Components (< 68.2 mm) < 1.2 mm 16959 Figure 2. www.vishay.com 2 Document Number 84068 Rev. 7, 07-Jan-03 VISHAY Vishay Semiconductors 10‘‘ Reel Specification (SOD57 and SOD64 Packages) Description Symbol Reel Size 10‘‘ Arbor Hole Diameter D0 30 ± 1 mm Reel Diameter D2 250 ± 2 mm Drive Hole Diameter D3 10 ± 1 mm Reel Width W1 68 ± 1 mm Drive / Arbor Hole Spacing W2 27.5 ± 1 mm Core Material Plastic Reel Material Plastic W1 D0 D3 D2 D1 W2 15 801 Figure 3. 13‘‘ Reel Specification (DO204AP(G1), G3 and G4 Packages) C 13.0 Inch/ 330 mm Anode Lead White Tape 91.9 (3.62) Dia. 50.8 (2.00) Dia. 38.1 (1.50) Dia. 14.3 (0.56) Dia. Kraft Paper Cathode Lead Colored Tape 16960 Figure 4. Document Number 84068 Rev. 7, 07-Jan-03 www.vishay.com 3 VISHAY Vishay Semiconductors Ammopack #1 Specification (SOD57 and SOD64 Packages) (Figure 5. ) Description Symbol Specification Inches Millimeters 260 ± 5.0 Length A 10.25 ± 0.2 Width B 2.75 ± 0.2 70 ± 5.0 Height C 5.75 ± 0.65 146 ± 16.0 Material: corrugated board (neutral) 15800 A C Inspection hole (both sides) B Figure 5. Ammopack #2 Specification (DO204AP(G1), G3 and G4 Packages) ( Figure 6. ) Dimension ‘‘A‘‘ Dimension ‘‘B‘‘ Dimension ‘‘C‘‘ 10.0‘‘ (255 mm) 3.15‘‘ (80 mm) 4.53‘‘ (115 mm) C A B 16956 Figure 6. www.vishay.com 4 Document Number 84068 Rev. 7, 07-Jan-03 VISHAY Vishay Semiconductors Preformed Leads (SOD64 Packages) Some types of automatic insertion machines have problems in bending the relatively thick leads of SOD64 Sinterglass Diodes. To overcome this, our diodes can be ordered with preformed leads as follows. Preformed Sinterglass Diodes are shipped in bulk. SUFFIX RAS SUFFIX RA Figure 9. Figure 7. SUFFIX RAP Figure 8. Common bending version: A (mm) H (mm) RA 15/10 RAS 15/10 Suffix RAP 15/10 15 10 RA 17.5/ 10 RAS 17.5/ 10 RAP 17.5/ 10 17.5 10 Other bending versions are available on request. Document Number 84068 Rev. 7, 07-Jan-03 www.vishay.com 5