SCHRACK General Purpose Relays Safety Relay SR2M n 2 pole safety relay with either 1NO+1NC or 2CO contacts n Forcibly guided contacts according to EN 50205 n Rated current 6 A n 6 kV surge resistance between poles Applications Emergency shut-off, machine control, elevator and escalator control, light barrier control F0188-D Approvals V REG.-Nr. 116064, Z E214024, T 968/EZ 111.03/05 Technical data of approved types on request Contact data Contact configuration 1 NO contact and 1 NC contact or 2 CO contacts1) Contact set single contact, forcibly guided 1 NC + 1NO: type A according to EN 50205 2 CO: type B according to EN 50205 Type of interruption micro disconnection Rated voltage / max. switching voltage AC 250 / 400 VAC Rated current 6A Maximum breaking capacity AC 1500 VA Contact material AgNi Minimum contact load 10 mA / 5 V Contact resistance w 100 mOhm / 1 A / 24 VDC w 20 Ohm / 10 mA / 5 VDC Rated frequency of operation with / without load 6 min-1 / 300 min-1 1) According EN50205 only 1NO / 1NC (11-14 and 22-21 or 12-11 and 21-24) shall be used as forcibly guided contacts. Contact ratings Type Contact Load*) UL 508 V23047-A1…-A501 V23047-A1…-A501 V23047-A1…-A511 V23047-A1…-A511 1 1 1 1 B300 R300 B300 R300 NO NO NO NO pilot pilot pilot pilot duty duty duty duty Ambient temp. [°C] Cycles 40°C 40°C 40°C 40°C 6x103 6x103 6x103 6x103 *) load on one pole Coil data Rated coil voltage range DC coil Operative range to IEC 61810 5...110 VDC 2 Coil versions, DC-coil Coil Rated code voltage VDC 005 5 006 6 009 9 012 12 015 15 018 18 021 21 024 24 036 36 Operate voltage VDC 3.8 4.5 6.8 9.0 11.3 13.5 15.8 18.0 27.0 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Release voltage VDC 0.5 0.6 0.9 1.2 1.5 1.8 2.1 2.4 3.6 Coil resistance Ohm 35,7+10% 51+10% 116+10% 206+10% 321+10% 483+10% 630+10% 823+10% 1851+10% Rated coil power mW 700 706 698 699 700 671 700 700 700 1 Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. SCHRACK General Purpose Relays Safety Relay SR2M (Continued) Coil versions, DC-coil (continued) Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW 040 40 30.0 4.0 2286+10% 700 048 48 36.0 4.8 3291+12% 700 060 60 45.0 6.0 5142+12% 700 080 80 64.0 8.5 9143+12% 700 110 110 82.5 11.0 17285+12% 700 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request PCB layout / terminal assignment Bottom view on solder pins 2 CO contacts Insulation Dielectric strength coil-contact circuit open contact circuit adjacent contact circuits Clearance / creepage coil-contact circuit adjacent contact circuits Material group of insulation parts Tracking index of relay base Insulation to IEC 61810-1 Type of insulation coil-contact circuit open contact circuit adjacent contact circuits Rated insulation voltage Pollution degree Rated voltage system Overvoltage category Insulation to EN 50178 Type of insulation coil-contact circuit adjacent contact circuits 4000 Vrms 1500 Vrms 3000 Vrms W 8 / 8 mm W 5.5 / 5.5 mm IIIa PTI 250 S0163-CO reinforced micro disconnection basic 250 V 2 230 / 400 V III S0163-BJ 1 NO and 1 NC contacts reinforced reinforced Other data Mechanical endurance 10x106 cycles Material RoHS - Directive 2002/95/EC compliant as per product date code 0407 Environment Ambient temperature range -25...+70 °C Vibration resistance (function) NO / NC contact > 10 / 2.5 g, 15....200 Hz Shock resistance (function) NO / NC contact > 10 / 5 g, 11 ms half sine Category of protection RT III2) Processing Resistance to soldering heat 260°C / 5 s Relay weight 20 g Packaging unit 20 pcs S0163_CU S0163-CV 2 ) please contact technical support for washing parameters Dimensions S0273-BB 2 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. SCHRACK General Purpose Relays Safety Relay SR2M (Continued) Product key Typical product key V23047 -A1 012 -A 5 11 Type V23047 Safety Relay SR2M Version A1 standard Coil Coil code = rated coil voltage (e.g. 024=24 VDC) Contact set A single contact Contact material 5 AgNi Contact configuration 01 2 CO contacts (2 form C) 11 1 NO and 1 NC contact (1 form A + 1 form B) Other types on request Product key V23047-A1005-A501 V23047-A1005-A511 V23047-A1006-A501 V23047-A1006-A511 V23047-A1009-A501 V23047-A1009-A511 V23047-A1012-A501 V23047-A1012-A511 V23047-A1018-A501 V23047-A1018-A511 V23047-A1021-A501 V23047-A1021-A511 V23047-A1024-A501 V23047-A1024-A511 V23047-A1036-A501 V23047-A1036-A511 V23047-A1040-A501 V23047-A1040-A511 V23047-A1048-A501 V23047-A1048-A511 V23047-A1060-A511 V23047-A1110-A511 Version standard wash tight Contact material AgNi Configuration 2 CO contacts 1 NO + 1 NC 2 CO contacts 1 NO + 1 NC 2 CO contacts 1 NO + 1 NC 2 CO contacts 1 NO + 1 NC 2 CO contacts 1 NO + 1 NC 2 CO contacts 1 NO + 1 NC 2 CO contacts 1 NO + 1 NC 2 CO contacts 1 NO + 1 NC 2 CO contacts 1 NO + 1 NC 2 CO contacts 1 NO + 1 NC Coil 5 VDC 6 VDC 9 VDC 12 VDC 18 VDC 21 VDC 24 VDC 36 VDC 40 VDC 48 VDC 60 VDC 110 VDC Part number 1393258-2 7-1415006-1 3-1415011-1 6-1415011-1 1393258-3 7-1415011-1 1393258-4 1393258-5 1393258-8 1393258-9 1-1393258-1 1-1393258-2 1-1393258-5 1-1393258-7 2-1393258-0 8-1415011-1 2-1393258-1 2-1393258-2 3-1415006-1 9-1415011-1 2-1393258-3 2-1415012-1 3 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.