DS56-0001 Low Cost Six-Way SMT Power Divider 824 - 960 MHz Features • • • • • • • • Rev. V5 Functional Diagram1 Small Size, Low Profile Superior Repeatability (Lot-to-lot Variation) Industry Standard SOW-16 SMT Plastic Package Typical Isolation: 25 dB Typical Insertion Loss: 0.3 dB Low Cost 1 Watt Power Handling SOW-16 Package Description M/A-COM’s DS56-0001 is an IC-based monolithic power divider in a low cost SOW-16 plastic package. This 6-way power divider is ideally suited for applications where PCB real estate is at a premium and part count reduction and cost are critical. Typical applications include base station switching networks and other cellular equipment, including subscriber units. Available in tape and reel. The DS56-0001 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. Ordering Information Part Number Package DS56-0001 Bulk Packaging DS56-0001-TR 1000 piece reel DS56-0001SAM Sample Test Board 1. Pins 2, 4, 6, 8, 9, 10, 11, 13, and 15 must be DC and RF grounded. Pin Configuration Pin No. Function Pin No. Function 1 2 RF3 (OUT) 9 GND GND 10 GND 3 RF2 (OUT) 11 GND 4 GND 12 RF6 (OUT) 5 RF1 (OUT) 13 GND 6 GND 14 RF5 (OUT) 7 RF IN 15 GND 8 GND 16 RF4 (OUT) Note: Reference Application Note M513 for reel size information. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS56-0001 Low Cost Six-Way SMT Power Divider 824 - 960 MHz Rev. V5 Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Units Min Typ Max Insertion Loss Above 7.8 dB dB — 1.3 1.5 Isolation dB 20 25 — VSWR — — 1.4:1 1.6:1 Amplitude Balance dB — 0.2 0.5 Deg. — 6 8 Phase Balance Absolute Maximum Ratings 2,3 2. 3. 4. Parameter Absolute Maximum Input Power4 1 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to 150°C Recommended PCB Configuration Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. With internal load dissipation of 0.125 W maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS56-0001 Low Cost Six-Way SMT Power Divider 824 - 960 MHz Rev. V5 Typical Performance Curves Insertion Loss vs. Frequency Isolation vs. Frequency VSWR vs. Frequency 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS56-0001 Low Cost Six-Way SMT Power Divider 824 - 960 MHz Rev. V5 SOW-16† † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.