Praetorian® L-C LCD and Camera EMI Array with ESD Protection CM1693-06DE Features • Functional Description Six channels of EMI filtering with integrated ESD The CM1693-06DE is a pi-style EMI filter array with ESD protection protection that integrates six filters (C-L-C) into a small- • Pi-style EMI filters in a capacitor-inductor- form factor, uDFN 0.40mm pitch package. Each EMI filter channel is implemented as a 3-pole L-C filter, where the • capacitor (C-L-C) network ±18kV ESD protection on each channel (IEC 61000-4-2 Level 4, contact discharge) Greater than -35dB attenuation (typical) at 1GHz uDFN lead-free package with 0.40mm lead pitch: • 6-ch. = 12-lead uDFN uDFN lead-free package with 0.40mm lead pitch: • 12-lead: 2.50mm x 1.35mm 06DE's roll-off frequency at -6dB attenuation is 300MHz Increased robustness against vertical impacts attenuation over the 800MHz to 6GHz frequency range. during manufacturing process The device includes ESD diodes on every pin which RoHS-compliant, lead-free finishing provides a very high level of protection for sensitive • • • • • component values are 10pF-26nH-12pF. The CM1693and can be used in applications where the data rates are as high as 140Mbps. The CM1693-06DE also provides greater than -30dB electronic components against possible electrostatic discharge (ESD). The ESD protection diodes connected to Applications the filter ports are designed and characterized to safely • LCD and camera data lines in mobile handsets dissipate ESD strikes of ±18kV, which is beyond the • I/O port protection for mobile handsets, notebook maximum requirement of the IEC61000-4-2 international computers, PDAs, etc. standard. • • • • EMI filtering for data ports in cell phones, PDAs or notebook computer This device is particularly well suited for wireless handsets, Wireless handsets Handheld PCs/PDAs LCD and camera modules mobile LCD modules and PDAs because of its small package format and easy-to-use pin assignments. In particular, the CM1693-06DE is ideal for EMI filtering and protecting data and control lines for the LCD display and camera interface in mobile handsetsl. Block Diagram 26nH FILTER+ESDn* FILTER+ESDn* 10pF 12pF GND ©2010 SCILLC. All rights reserved. March 2010 – Rev. 2 Publication Order Number: CM1693-06DE/D CM1693-06DE Pin Configurations TOP VIEW BOTTOM VIEW (Pins Down View) 12 11 10 9 8 (Pins Up View) 7 1 2 2 3 4 5 6 8 7 GND PAD P936(x) 1 3 4 5 Pin 1 Marking 6 12 11 10 9 CM1693- 06DE 12-Lead uDFN Package Note: These drawings are not to scale. Pin Descriptions DEVICE PIN(s) NAME 1 FILTER1 2 DESCRIPTON DEVICE PIN(s) NAME DESCRIPTON Filter + ESD Channel 1 12 FILTER1 Filter + ESD Channel 1 FILTER2 Filter + ESD Channel 2 11 FILTER2 Filter + ESD Channel 2 3 FILTER3 Filter + ESD Channel 3 10 FILTER3 Filter + ESD Channel 3 4 FILTER4 Filter + ESD Channel 4 9 FILTER4 Filter + ESD Channel 4 5 FILTER5 Filter + ESD Channel 5 8 FILTER5 Filter + ESD Channel 5 6 FILTER6 Filter + ESD Channel 6 7 FILTER6 Filter + ESD Channel 6 GND PAD GND Device Ground Ordering Information Pins Package Ordering Part Number1 Part Marking 12 uDFN-12 CM1693-06DE P936(x) Note 1: Parts are shipped in Tape and Reel form unless otherwise specified. Note 2: (x) = date code Rev.2 | Page 2 of 6 | www.onsemi.com 2 CM1693-06DE Absolute Maximum Ratings PARAMETER RATING UNITS -65 to +150 °C DC current per Inductor 30 mA DC Package Power Rating 500 mW RATING UNITS -40 to +85 °C Storage Temperature Range Standard Operating Conditions PARAMETER Operating Temperature Range Electrical Operating Characteristics (see Note 1) SYMBOL L PARAMETER CONDITIONS MIN Channel Inductance Total Channel Capacitance At 2.5VDC Reverse Bias, 1MHz, 30mVAC 17.6 VDIODE Standoff Voltage IDIODE =10μA 5.5 ILEAK Diode Leakage Current (reverse bias) VDIODE =+3.3V VSIG Signal Clamp Voltage Positive Clamp Negative Clamp ILOAD = 10mA ILOAD = -10mA RDYN fR MAX 26 CTOTAL VESD TYP In-system ESD Withstand Voltage Contact Discharge per IEC 61000-4-2 Level 4 5.6 -1.5 22 UNITS nH 26.4 pF V 0.1 1.0 μA 6.8 -0.8 9.0 -0.4 V V Notes 2 and 3 ±18 kV Dynamic Resistance Positive Negative 2.3 0.9 Ω Ω Roll-off Frequency at -6dB Attenuation ZSOURCE=50Ω, ZLOAD=50Ω 300 MHz Note 1: TA=25°C unless otherwise specified. Note 2: ESD applied to input and output pins with respect to GND, one at a time. Note 3: Clamping voltage is measured at the opposite side of the EMI filter to the ESD pin (i.e. if ESD is applied to pin A1 then clamping voltage is measured at pin C1). Unused pins are left open. Rev. 2 | Page 3 of 6 | www.onsemi.com CM1693-06DE Performance Information Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 1. Typical Insertion Loss Typical Diode Capacitance vs. Input Voltage Figure 2. Filter Capacitance vs. Input Voltage (normalized to capacitance at 0VDC and 25°C) Rev.2 | Page 4 of 6 | www.onsemi.com CM1693-06DE Package Dimensions The 12-lead, 0.4mm pitch uDFN package dimensions are presented below. Package TDFN JEDEC No. MO-229C* Leads 12 Millimeters Inches Dim. Min Nom Max Min Nom Max A 0.45 0.50 0.55 0.018 0.020 0.022 A1 0.00 0.02 0.05 0.000 0.001 0.002 0.127 REF A3 0.005 REF b 0.15 0.20 0.25 0.006 0.008 0.010 D 2.40 2.50 2.60 0.094 0.098 0.102 D2 1.90 2.00 2.10 0.075 0.079 0.083 E 1.25 1.35 1.45 0.049 0.053 0.057 E2 0.30 0.40 0.50 0.012 0.016 0.020 e 0.40 BSC 0.016 BSC K 0.22 REF 0.009 REF L # per tape and reel 0.15 0.30 0.35 0.006 0.010 0.014 3000 pieces Controlling dimension: millimeters *This package is compliant with JEDEC standard MO229C with the exception of the D, D2, E, E2, K and L dimensions as called out in the table above. Dimensions for 12-Lead, 0.4mm pitch uDFN package Rev. 2 | Page 5 of 6 | www.onsemi.com CM1693-06DE Tape and Reel Specifications PART NUMBER PACKAGE SIZE (mm) POCKET SIZE (mm) B0 X A0 X K0 TAPE WIDTH W REEL DIAMETER QTY PER REEL P0 P1 CM1693-06DE 2.50 X 1.35 X 0.50 2.75 X 1.60 X 0.60 8mm 178mm (7") 3000 4mm 4mm ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 Rev.2 | Page 6 of 6 | www.onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative