4-Channel LCD and Camera EMI Filter Array with ESD Protection CM1408-04DE Features Applications • • • • • • • • • • channels of EMI filtering with integrated ESD protection Pi-style EMI filters in a capacitor-resistorcapacitor (C-R-C) network 15kV ESD protection on each channel (IEC 61000-4-2 Level 4, contact discharge) 30kV ESD protection on each channel (HBM) Greater than -35dB attenuation (typical) at 1GHz TDFN packaging with 0.5mm lead pitch: Increased robustness against vertical impacts during manufacturing process Lead-free finishing • • • • LCD and Camera data lines in mobile handsets I/O port protection for mobile handsets, notebook computers, PDAs etc. EMI filtering for data ports in cell phones, PDAs or notebook computers. Wireless handsets Handheld PCs/PDAs LCD and camera modules Block Diagram ©2010 SCILLC. All rights reserved. April 2010 Rev.2 Publication Order Number: CM1408-04DE/D CM1408-04DE PIN DESCRIPTIONS DEVICE PIN(s) NAME 1 FILTER1 2 DESCRIPTION DEVICE PIN(s) NAME Filter + ESD Channel 1 8 FILTER1 Filter + ESD Channel 1 FILTER2 Filter + ESD Channel 2 7 FILTER2 Filter + ESD Channel 2 3 FILTER3 Filter + ESD Channel 3 6 FILTER3 Filter + ESD Channel 3 4 FILTER4 Filter + ESD Channel 4 5 FILTER4 Filter + ESD Channel 4 GND PAD GND Device Ground - - - -- Rev. 2 | Page 2 of 9 | www.onsemi.com DESCRIPTION CM1408-04DE Ordering Information PART NUMBERING INFORMATION Lead-free Finish Pins Package Ordering Part Number1 Part Marking 8 TDFN-8 CM1408-04DE N08 4E Note 1: Parts are shipped in Tape and Reel form. Specifications ABSOLUTE MAXIMUM RATINGS PARAMETER RATING UNITS -65 to +150 °C DC Power per Resistor 100 mW DC Package Power Rating 500 mW RATING UNITS -40 to +85 °C Storage Temperature Range STANDARD OPERATING CONDITIONS PARAMETER Operating Temperature Range Rev. 2 | Page 3 of 9 | www.onsemi.com CM1408-04DE ELECTRICAL OPERATING CHARACTERISTICS (SEE NOTE1) SYMBOL R PARAMETER CONDITIONS Resistance CTOTAL MIN TYP MAX UNITS 80 100 120 Ω 14 17 22 pF Total Channel Capacitance At 2.5VDC Reverse Bias, 1MHz, 30mVAC Capacitance C At 2.5VDC Reverse Bias, 1MHz, 30mVAC 8.5 pF Standoff Voltage IDIODE=10μA 6.0 V ILEAK Diode Leakage Current (reverse bias) VDIODE= 3.3V 0.1 1.0 μA VSIG Signal Clamp Voltage Positive Clamp Negative Clamp ILOAD = 10mA ILOAD = -10mA 6.8 -0.8 9.0 -0.4 V V C VDIODE VESD RDYN f C In-system ESD Withstand Voltage Notes 2 and 3 a) Human Body Model, MIL-STD-883, Method 3015 b) Contact Discharge per IEC 61000-42 Level 4 Dynamic Resistance Positive Negative Cut-off Frequency ZSOURCE=50Ω, ZLOAD=50Ω Channel R = 100Ω, Channel CSINGLE = 8.5pF Note 1: TA=25°C unless otherwise specified. Note 2: ESD applied to input and output pins with respect to GND, one at a time. Note 3: These parameters are guaranteed by design and characterization. Rev. 2 | Page 4 of 9 | www.onsemi.com 5.6 -1.5 30 kV 15 kV 2.3 0.9 Ω Ω 200 MHz CM1408-04DE Performance Information Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 1. Insertion Loss vs. Frequency (FILTER1 Input to GND) Figure 2. Insertion Loss vs. Frequency (FILTER2 Input to GND) Rev. 2 | Page 5 of 9 | www.onsemi.com CM1408-04DE Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 3. Insertion Loss vs. Frequency (FILTER3 Input to GND) Figure 4. Insertion Loss vs. Frequency (FILTER4 Input to GND) Rev. 2 | Page 6 of 9 | www.onsemi.com CM1408-04DE Performance Information (cont’d) Typical Diode Capacitance vs. Input Voltage Figure 5. Filter Capacitance vs. Input Voltage (normalized to capacitance at 2.5VDC and 25°C) Rev. 2 | Page 7 of 9 | www.onsemi.com CM1408-04DE Mechanical Details TDFN-08 Mechanical Specifications Dimensions for CM1408-04DE device packaged in an 8-lead TDFN package are presented below. PACKAGE DIMENSIONS D 8 Package TDFN JEDEC No. MO-229 (Var. VCCD-3) Leads 8 Millimeters 7 6 5 ✝ Pin 1 Marking Inches Dim. A Min Nom Max Min Nom Max 0.70 0.75 0.80 0.028 0.030 0.032 1 2 3 4 TOP VIEW 0.20 REF A3 0.008 REF 0.10 C b 0.20 0.25 0.30 0.008 0.010 0.012 D 1.95 2.00 2.05 0.077 0.079 0.081 D2 1.55 1.60 1.65 0.061 0.063 0.065 E 1.95 2.00 2.05 0.077 0.079 0.081 E2 0.85 0.90 0.95 0.033 0.035 0.037 0.50 BSC e K 0.20 L 0.25 # per tape and reel 1 0.020 BSC 0.35 0.010 A3 2 3 4 D2 0.008 0.30 A SIDE VIEW GND C0.25 PAD 0.012 GND PA D 0.014 L 3000 pieces 8 7 6 5 K b e 8X 0.10 Controlling dimension: millimeters ✝ This package is compliant with JEDEC standard MO-229, variation VCCD-3 with exception of the "D2" and "E2" dimensions as called out in the table above. M CAB BOTTOM VIEW Dimensions for 8-Lead, 0.5mm pitch TDFN package Rev. 2 | Page 8 of 9 | www.onsemi.com CM1408-04DE ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 Rev. 2 | Page 9 of 9 | www.onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative