EMI Filter with ESD Protection for SIM Card Applications CM1623 Features • • • • • • • 4-channel EMI filtering with integrated ESD protection Pi-style EMI filters in a capacitor-resistor-capacitor (C-R-C) network ±15kV ESD protection on each channel (IEC 61000-4-2 Level 4, contact discharge) 8-lead UDFN package with 0.40mm pitch Tiny UDFN package size: 1.7mm x 1.35mm x 0.5mm Increased robustness against vertical impacts during manufacturing process RoHS compliant, lead-free finish ©2010 SCILLC. All rights reserved. May 2010 – Rev. 2 Publication Order Number: CM1623/D CM1623 Pin Information PIN DESCRIPTIONS PIN NAME PIN NAME 1 RST Filter + ESD Channel 1 8 RST Filter + ESD Channel 1 2 CLK Filter + ESD Channel 2 7 CLK Filter + ESD Channel 2 3 DATA Filter + ESD Channel 3 6 DATA Filter + ESD Channel 3 4 VCC V External 5 VCC V External GND PAD GND Device Ground DESCRIPTION DESCRIPTION Ordering Information PART NUMBERING INFORMATION Lead-free Finish Pins Package Ordering Part Number1 Part Marking 8 UDFN-8 CM1623-04DE P23 Note 1: Parts are shipped in Tape and Reel form unless otherwise specified. Rev.2 | Page 2 of 9 | www.onsemi.com CM1623 Specifications ABSOLUTE MAXIMUM RATINGS PARAMETER RATING UNITS -65 to +150 °C DC Power per Resistor 100 mW DC Package Power Rating 500 mW RATING UNITS -40 to +85 °C Storage Temperature Range STANDARD OPERATING CONDITIONS PARAMETER Operating Temperature Range ELECTRICAL OPERATING CHARACTERISTICS (SEE NOTE1) SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS R1 Reset Channel Resistance 80 100 120 Ω R2 Clock Channel Resistance 37.6 47 56.4 Ω R3 Data Channel Resistance 80 100 120 Ω C1 Capacitance on Pins 1, 2, and 3 At 1 MHz, VIN=0V 16 20 24 pF C2 Capacitance on Pins 4 and 5 At 1 MHz, VIN=0V 18 ILEAK Diode Leakage Current (Reverse Bias) VDIODE=3.3V 0.1 1.0 μA VSIG Signal Clamp Voltage: a) Positive Clamp b) Negative Clamp ILOAD = 10mA ILOAD = -10mA 6.8 -0.8 9.0 -0.4 V V VESD ESD Peak Discharge Voltage Protection on All Pins In-system ESD Withstand Voltage: a) Contact Discharge per IEC 61000-4-2 Level 4 b) Air Discharge per IEC 61000-4-2 Level 4 5.6 -1.5 TA=25°C; Note 2 Note 1: All parameters specified at TA=25°C unless otherwise noted. Note 2: Standard IEC 61000-4-2 with CDischarge = 150pF, RDischarge = 330Ω. Rev. 2 | Page 3 of 9 | www.onsemi.com pF kV ±15 ±15 ±15 ±15 kV kV CM1623 Performance Information Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 1. Insertion Loss vs. Frequency, Filter 1 (Pins 1 and 8) Figure 2. Insertion Loss vs. Frequency, Filter 2 (Pins 2 and 7) Rev.2 | Page 4 of 9 | www.onsemi.com CM1623 Performance Information (Cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 3. Insertion Loss vs. Frequency, Filter 3 (Pins 3 and 6) Figure 4. Insertion Loss vs. Frequency, Filter 4 (Pins 4 and 5) Rev. 2 | Page 5 of 9 | www.onsemi.com CM1623 Figure 5. Diode Capacitance vs. Input Voltage (Normalized to Capacitance at 0VDC and 25°C) Rev.2 | Page 6 of 9 | www.onsemi.com CM1623 Mechanical Details UDFN-08 Mechanical Specifications Dimensions for the CM1623 supplied in a 8-lead, 0.4mm pitch UDFN package are presented below. PACKAGE DIMENSIONS Package UDFN JEDEC No. MO-229C Leads 8 ✝ Millimeters Inches Dim. Min Nom Max Min Nom Max A 0.45 0.50 0.55 0.018 0.020 0.022 A1 0.00 0.02 0.05 0.000 0.001 0.002 0.127 REF A3 0.005 REF b 0.15 0.20 0.25 0.006 0.008 0.010 D 1.60 1.70 1.80 0.063 0.067 0.071 D2 1.10 1.20 1.30 0.043 0.047 0.051 E 1.25 1.35 1.45 0.049 0.053 0.057 E2 0.30 0.40 0.50 0.012 0.016 0.020 e 0.40 BSC 0.016 BSC K 0.22 0.009 L # per tape and reel 0.15 0.25 0.35 0.006 0.010 0.014 3000 pieces Controlling dimension: millimeters Dimensions for 8-Lead, 0.4mm pitch UDFN Package ✝ This package is compliant with JEDEC standard MO-229C with the exception of the "D", "D2", "E", "E2", "K" and "L" dimensions as called out in the table above. Rev. 2 | Page 7 of 9 | www.onsemi.com CM1623 Tape and Reel Specifications PART NUMBER PACKAGE SIZE (mm) POCKET SIZE (mm) B0 X A0 X K0 TAPE WIDTH W REEL DIAMETER QTY PER REEL P0 P1 CM1623 1.70 X 1.35 X 0.50 1.95 X 1.60 X 0.60 8mm 178mm (7") 3000 4mm 4mm Rev.2 | Page 8 of 9 | www.onsemi.com CM1623 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 Rev. 2 | Page 9 of 9 | www.onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative