CSC Vishay Dale Thick Film Resistor Networks Single-In-Line, Coated SIP 01, 03, 05 Schematics FEATURES • • • • • • • • 0.195" [4.95mm] "A", 0.250" [6.35mm] "B" "A" profile standard in 4 thru 12 pins Highly stable thick film Low temperature coefficient (- 55°C to + 125°C) ± 100ppm/°C Reduces total assembly costs Resistor elements protected by tough epoxy conformal coating Wide resistance range Available in bag pack or tube pack STANDARD ELECTRICAL SPECIFICATIONS MODEL/ SCHEMATIC PROFILE RESISTOR RESISTANCE POWER RATING RANGE Max. @ 70°C* Ω STANDARD TEMPERATURE TCR TOLERANCE COEFFICIENT TRACKING % (- 55°C to + 125°C) (- 55°C to + 125°C) OPERATING VOLTAGE VDC Max. CSC01 A B 0.20 W 0.25 W 10 - 2.2M ± 2 (1%*) ± 100ppm/°C ± 50ppm/°C 100 CSC03 A B 0.30 W 0.40 W 10 - 2.2M ± 2 (1%*) ± 100ppm/°C ± 50ppm/°C 100 CSC05 A B 0.20 W 0.25 W 10 - 2.2M ± 2 (1%*) ± 100ppm/°C ± 150ppm/°C 100 * For resistor power ratings @ + 25°C see derating curves. • See derating curves for Package Power Rating. Higher power rated “C” Profile available. * Contact factory for 1% TECHNICAL SPECIFICATIONS PARAMETER UNIT CSC Series Veff < 50ppm typical VAC 200 Isolation Resistance (03 Schematic) Ω > 100M Operating Temperature Range °C - 55 to + 125 Voltage Coefficient of Resistance Dielectric Strength ORDERING INFORMATION 01 and 03 Schematics CSC MODEL 08 NUMBER OF PINS A PACKAGE CODE A = 0.195" [4.95mm] Height 0.100" [2.54mm] Lead Spacing B = 0.250" [6.35mm] Height 0.100" [2.54mm] Lead Spacing 01 03 SCHEMATIC 01 = Pin #1 common to all resistors 03 = Isolated resistors 101 RESISTANCE VALUE First 2 digits are significant figures. Last digit specifies number of zeros to follow. G TOLERANCE G= ± 2% 05 Schematic CSC MODEL 08 NUMBER OF PINS A PACKAGE CODE A = 0.195" [4.95mm] Height 0.100" [2.54mm] Lead Spacing B = 0.250" [6.35mm] Height 0.100" [2.54mm] Lead Spacing www.vishay.com 32 331 05 221 SCHEMATIC RESISTANCE RESISTANCE VALUE R2 VALUE R1 First two digits are significant figures. The third digit specifies the number of zeros to follow. For Technical Questions, contact: [email protected] G TOLERANCE G= ± 2% Document Number: 31509 Revision 02-Aug-02 CSC Thick Film Resistor Networks, Single-In-Line, Coated SIP Vishay Dale DIMENSIONS in inches [millimeters] A Max. 0.098 [2.49] Max. C Max. 0.130 ± 0.010 [3.30 ± 0.254] Pin #1 0.045 [1.14] 0.050 [1.27] Max. 0.018 ± 0.003 [0.457 ± 0.076] 0.100 ± 0.010 [2.54 ± 0.254] Non-Accumulative 2 3 n-1 MODEL NUMBER OF RESISTORS CSC04 3 0.390 [9.90] 0.300 [7.62] CSC05 4 0.490 [12.45] 0.400 [10.16] CSC06 5 0.590 [14.99] 0.500 [12.70] CSC07 6 0.690 [17.53] 0.600 [15.24] CSC08 7 0.790 [20.07] 0.700 [17.78] CSC09 8 0.890 [22.61] 0.800 [20.32] CSC10 9 0.990 [25.15] 0.900 [22.86] CSC11* 10 1.09 [27.69] 1.00 [25.40] CSC12* 11 1.19 [30.23] 1.100 [27.94] MODEL NUMBER OF RESISTORS A (Maximum) B C (Maximum) CSC04 2 0.390 [9.90] 0.300 [7.62] "A" Profile = 0.195 [4.95] CSC06 3 0.590 [14.99] 0.500 [12.70] CSC08 4 0.790 [20.07] 0.700 [17.78] 2 3 4 n-1 n CSC10 5 0.990 [25.15] 0.900 [22.86] CSC12* 1.19 [30.23] 1.100 [27.94] MODEL 6 NUMBER OF RESISTORS 05 Schematic A (Maximum) B C (Maximum) CSC04 4 0.390 [9.90] 0.300 [7.62] "A" Profile = 0.195 [4.95] CSC05 6 0.490 [12.45] 0.400 [10.16] R2 "B" Profile = 0.250 [6.35] CSC06 8 0.590 [14.99] 0.500 [12.70] R1 CSC07 10 0.690 [17.53] 0.600 [15.24] CSC08 12 0.790 [20.07] 0.700 [17.78] 1 2 3 n-1 n CSC09 14 0.890 [22.61] 0.800 [20.32] CSC10 16 0.990 [25.15] 0.900 [22.86] CSC11* 18 1.09 [27.69] 1.00 [25.40] CSC12* 20 1.19 [30.23] 1.100 [27.94] B A (Maximum) n 03 Schematic 1 0.012 ± 0.003 [0.305 ± 0.076] (Leads are Along Centerline of Body) B 01 Schematic 1 0.032 [0.813] C (Maximum) "A" Profile = 0.195 [4.95] "B" Profile = 0.250 [6.35] "B" Profile = 0.250 [6.35] * "B" Profile only. MECHANICAL SPECIFICATIONS STOCKED RESISTANCE VALUES IN OHMS (“G” TOLERANCE) Marking Resistance to Solvents: Permanency testing per MIL-STD202, Method 215. Solderability: Per MIL-STD-202, Method 208E, RMA flux. Standard E-24 resistance values stocked. Consult factory. Body: High alumina, epoxy coated. Terminals: Copper alloy, solder plated. Many dual terminator resistance values stocked. Consult factory Document Number: 31509 Revision 02-Aug-02 For Technical Questions, contact: [email protected] www.vishay.com 33 CSC Vishay Dale Thick Film Resistor Networks, Single-In-Line, Coated SIP "A" Profile Power Rating (Watts) "A" PROFILE + 70°C PACKAGE RATINGS CSC12A 1.5 watts CSC11A 1.37 watts CSC10A 1.25 watts CSC09A 1.12 watts CSC08A 1.00 watts CSC07A 0.87 watts + 125 + 150 CSC06A 0.75 watts Ambient Temperature °C CSC05A 0.62 watts CSC04A 0.40 watts CSC10A Package 1.90 CSC08A Package 1.50 CSC06A Package 1.15 Single Resistor 03 Schematic 0.45 0.30 01 and 05 Schematics - 50 Derating + 25 + 70 Power Rating (Watts) "B" Profile "B" PROFILE + 70°C PACKAGE RATINGS 2.50 2.00 1.50 CSC12B 1.90 watts CSC10B Package CSC11B 1.75 watts CSC08B Package CSC10B 1.60 watts CSC06B Package CSC09B 1.45 watts CSC08B 1.30 watts CSC07B 1.15 watts CSC06B 1.00 watts CSC05B 0.80 watts CSC04B 0.60 watts Single Resistor 03 Schematic 0.60 0.38 01 and 05 Schematics - 50 Derating www.vishay.com 34 + 25 + 70 + 125 + 150 Ambient Temperature °C For Technical Questions, contact: [email protected] Document Number: 31509 Revision 02-Aug-02 CSC Thick Film Resistor Networks, Single-In-Line, Coated SIP Vishay Dale CIRCUIT APPLICATIONS "A" Profile = 3, 5, 7, 9 and 11 resistors with one pin common 01 Schematic 1 2 3 n-1 The CSCxxx-01 single-in-line resistor networks provide the user with nominally equal resistors, each connected to a common pin (Pin No. 1). Commonly used in the following applications: • "Wired OR" Pull-up • Open Collector Pull-up • Power Gate Pull-up • TTL Input Pull-down • MOS/ROM Pull-up/Pull-down • TTL Unused Gate Pull-up * "B" Profile available. Odd pin available in 5, 7, 9, and 11. n 03 Schematic "A" Profile = 2 through 6 isolated resistors The CSCxxx-03 single-in-line resistor networks provide the user with nominally equal resistors. Each resistor is isolated from all others. Commonly used in the following applications: • "Wired OR" Pull-up • Long-Line Impedance Balancing • Power Driven Pull-up • LED Current Limiting • Power Gate Pull-up • ECL Output Pull-down 1 2 3 4 n-1 n • Line Termination * "B" Profile available. 05 Schematic Pulse squaring and TTL dual-line terminators R2 The CSCxxx-05 circuits contain series pairs of resistors. Each series pair is connected between two common lines. The junction of these resistor pairs is connected to the input terminals. The 05 circuits are designed for TTL dualline termination and pulse squaring. R1 1 2 • TTL Input Pull-down 3 n-1 n * "B" Profile available. Odd pin available in 5, 7, 9 and 11. PERFORMANCE MAX. ∆R (Typical Test Lots) TEST CONDITIONS Thermal Shock 5 cycles between - 65°C and + 125°C ± 0.50% ∆R Short Time Overload 2.5 x rated working voltage, 5 seconds ± 0.25% ∆R Low Temperature Operation 45 minutes at full rated working voltage at - 65°C ± 0.25% ∆R Moisture Resistance 240 hours with humidity ranging from 80% RH to 98% RH ± 1.00% ∆R Resistance to Soldering Heat Leads immersed in + 350°C solder to within 1/16" of body for 3 seconds ± 0.25% ∆R Shock Total of 18 shocks at 100 G's ± 0.25% ∆R Vibration 12 hours at maximum of 20 G's between 10 and 2,000 Hz ± 0.25% ∆R Load Life 1,000 hours at + 70°C, rated power applied 1.5 hours “ON”, 0.5 hour “OFF” for full 1000 hour period. Derated according to the curve. ± 1.00% ∆R Terminal Strength 4.5 pound pull for 30 seconds ± 0.25% ∆R Insulation Resistance 10,000 Megohm (minimum) — Dielectric Withstanding Voltage No evidence of arcing or damage (200 V RMS for 1 minute) — Document Number: 31509 Revision 02-Aug-02 For Technical Questions, contact: [email protected] www.vishay.com 35