DFP Vishay Dale Thick Film Resistor Networks Flat Pack, 11, 12 Schematics FEATURES ∑ 11 and 12 Schematics ∑ 0.065" [1.65mm] height for high density packaging ∑ Low temperature coefficient (- 55°C to + 125°C) ± 100ppm/°C ∑ Hot solder dipped leads ∑ Highly stable thick film ∑ Wide resistance range ∑ All devices are capable of passing the MIL-STD-202, Method 210, Condition C "Resistance to Soldering Heat" test STANDARD ELECTRICAL SPECIFICATIONS POWER RATING GLOBAL MODEL P25°C ELEMENT W CIRCUIT SCHEMATIC P25°C PACKAGE W 0.25 0.65 0.15 0.65 1)Temperature Range: - 55°C to + 125°C • Consult factory for stocked values LIMITING ELEMENT VOLTAGE MAX. V 11 12 DFP 75 75 TEMPERATURE1) COEFFICIENT ppm/°C STANDARD2) TOLERANCE % RESISTANCE RANGE W ± 100 2 10 - 1M ± 100 2 10 - 1M 2) ± 1% and ± 5% tolerance available TEMPERATURE COEFFICIENT TRACKING ppm/°C 50 50 TECHNICAL SPECIFICATIONS 11 Schematic 7 or 8 isolated resistors The DFPxx11 provides the user with 7 or 8 nominally equal resistors with each resistor isolated from all others. Commonly used in the following applications: • "Wired OR" Pull-up • Long-line Impedance Balancing • Power Driven Pull-up • LED Current Limiting • Power Gate Pull-up • ECL Output Pull-down • Line Termination • TTL Input Pull-down DFP1411 Pin #1 DFP1611 12 Schematic 13 or 15 resistors with one pin common The DFPxx12 provides the user with a choice of 13 or 15 nominally equal resistors, each connected to a common pin (14 or 16). Commonly used in the following applications: • MOS/ROM Pull-up/Pull-down • TTL Input Pull-down • Open Collector Pull-up • Digital Pulse Squaring • "Wired OR" Pull-up • TTL Unused Gate Pull-up • Power Driven Pull-up • High Speed Parallel Pull-up • • • • • • • • DFP1412 Pin #1 DFP1612 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: DFP14121K00GD05 (preferred part numbering format) D GLOBAL MODEL F P 1 4 1 PIN COUNT SCHEMATIC 14 16 11 = Isolated 12 = Bussed DFP 2 1 K RESISTANCE VALUE R = Decimal K = Thousand M = Million 10R0 = 10W 680K = 680KW 1M00 = 1.0MW 0 0 G TOLERANCE CODE F = ± 1% G = ± 2% J = ± 5% D 0 5 PACKAGING SPECIAL E05 = Lead Free, Tube D05 = Tin/Lead, Tube Blank = Standard (Dash Number) (up to 3 digits) From 1-999 as applicable Historical Part Number example: DFP1412102G (will continue to be accepted) DFP 14 12 102 G D05 HISTORICAL MODEL PIN COUNT SCHEMATIC RESISTANCE VALUE TOLERANCE CODE PACKAGING www.vishay.com 40 For technical questions contact: [email protected] Document Number: 31513 Revision: 08-Sep-04 DFP Vishay Dale Thick Film Resistor, Networks, Flat Pack DIMENSIONS in inches [millimeters] Pin #1 0.250 [6.35] Min. 0.365 [9.27] Min. 0.385 [9.78] Max. 0.050 [1.27] Typ. 0.005 + 0.004 - 0.002 [0.127 + 0.102 - 0.051] 0.065 [1.65] Max. 0.825 [20.96] Max. 0.019 ± 0.006 [0.48 ± 0.15] 0.265 [6.73] Max. GLOBAL MODEL DIMENSION A DFP14 0.037 ± 0.010 [0.94 ± 0.25] DFP16 0.012 ± 0.010 [0.30 ± 0.25] TECHNICAL SPECIFICATIONS PARAMETER MECHANICAL SPECIFICATIONS UNIT DFP14 / 16 Isolation Resistance 11 Schematic MW > 100 Voltage Coefficient of Resistance: ppm/V < 50 typical VDC 75 Operating Temperature Range: °C - 55 to + 125 Storage Temperature Range: °C - 55 to + 150 Maximum Operating Voltage: Marking: Model number, schematic number, value tolerance, pin 1 indicator, date code. Marking Resistance Permanency testing per MIL-STD-202 to Solvents: Method 215. Solderability: Per MIL-STD-202, Method 208E. Terminals: Per MIL-STD-1276 DFPxx11, DFPxx12 = Type G (hot solder dipped). Hot solder dipped leads supplied as standard finish. Body: Epoxy filled ceramic sandwich 12 Schematic 0.65 Power Rating (Watts) 11 Schematic Power Rating (Watts) 0.250 [6.35] Min. Package 0.50 Package 0.65 0.50 Single Resistor 0.25 Single Resistor 0.15 - 55 + 25 Derating + 70 + 125 + 150 Ambient Temperature ∞C - 55 Derating + 25 + 70 + 125 + 150 Ambient Temperature ∞C PERFORMANCE MAX. DR (Typical Test Lots) TEST CONDITIONS Power Conditioning 1.5 x rated power, applied 1.5 hours “ON” and 0.5 hour “OFF” for 100 hours ± 4 hours at + 25°C ambient temperature ± 0.50% DR Thermal Shock 5 cycles between - 65°C and + 125°C ± 0.50% DR Short Time Overload 2.5 x rated working voltage, 5 seconds ± 0.25% DR Low Temperature Operation 45 minutes at full rated working voltage at - 65°C ± 0.25% DR Moisture Resistance 240 hours with humidity ranging from 80% RH to 98% RH ± 0.50% DR Resistance to Soldering Heat Leads immersed in + 260°DC solder to within 1/16" of body for 10 seconds ± 0.25% DR Shock Total of 18 shocks at 100 G's ± 0.25% DR Vibration 12 hours at maximum of 20 G's between 10 and 2,000 Hz ± 0.25% DR Load Life 1000 hours at + 70°C, rated power applied 1.5 hours “ON”, 0.5 hour “OFF” for full 1000 hour period. Derated according to the curve. ± 0.50% DR Terminal Strength 1.5 pound pull for 30 seconds ± 0.25% DR Insulation Resistance 10,000 Megohm (minimum) - Dielectric Withstanding Voltage No evidence of arcing or damage (200 V RMS for 1 minute) - Document Number: 31513 Revision: 08-Sep-04 For technical questions contact: [email protected] www.vishay.com 41