IDEA J378B

T-1, (3-mm) Round, Bi-level PCB Mount
LED Indicator, J378B Series
The J378B is one of the most popular indicators in LAN hubs and network controllers. Designed to save panel space, the assembly
measures just over 4.3 mm(0.170") in width and can be CMOS driven to save components. Long arrays should be located on a pitch of
4.4 mm(0.173") to avoid crowding and tolerance build-up. This series can also be supplied with pinout reversed from that shown by adding “-RL” to the order code of the part number.
4.3 (0.17)
8.38(.33)
2.8
3 typ
5.08
LED 1
9.65
2.54
3.5 min
Anode typ
2.54
LED 2
4.45
2.54
Red or
yellow
Anode
Green
Anode
+ –
(Pinout for single color)
(typ for bi-color)
Specify part desired as follows:
J378B/Order Code LED1 + Order Code LED 2
For example:
“J378B/G+Y” designates an assembly with a green LED on top and a yellow LED on the bottom.
“J378B/(G+Y)-RL” designates the same assembly with leads reversed.
ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT)
LED Lamp
Epoxy & Type
TInted Diffused
Typical Characteristics
Peak
Vf (V)
Iv (mcd)
2Θ1/2
λ (nm)
@If=20mA
@If=2 mA
(Deg)
Recom.
Op. If
(mA)
1.8
4.0
50
2 - 10
Color
Order Code
Red
I
639
Green
G
575
1.7
2.5
60
2 - 10
Yellow
Y
591
1.85
4.0
45
2 - 10
* Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise.
IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A