460 460-001 EMI/RFI Non-Environmental G-Spring Backshell with Strain Relief Rotatable Coupling - Low Profile 460 F S 001 M 16 05 F 6 CONNECTOR DESIGNATORS A-F-H-L-S ROTATABLE COUPLING Length ± .060 (1.52) Minimum Order Length 2.0 Inch (See Note 5) Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Product Series Connector Designator Angle and Profile A = 90 Solid B = 45 D = 90 Split S = Straight Strain Relief Style (F, G) Basic Part No. Finish (Table II) Cable Entry (Table IV) Shell Size (Table I) A Thread (Table I) Length * .690 (17.5) Max STYLE 2 (STRAIGHT See Note 1) * Length ± .060 (1.52) Minimum Order Length 1.5 Inch (See Note 5) .88 (22.4) Max M (Table IV) Cable Range C Typ. (Table I) E Shown with Style F Strain Relief G (Table III) (Table III) F (Table III) STYLE 2 (45° & 90° See Note 1) 90° SPLIT Shown with Style G Strain Relief K (Table III) L (Table III) .880 (22.4) Cable Range (Note 6) .416 (10.6) Max N (Table IV) Shown with Style F Strain Relief © 2005 Glenair, Inc. H (Table III) 90° SOLID Shown with Style F Strain Relief 469-001-XX Shield Support Ring (order separately) is recommended for use in all G-Spring backshells (see page 463-8) CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 460 - Page 4 460 460-001 EMI/RFI Non-Environmental G-Spring Backshell with Strain Relief Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 08 09 11 10 13 12 14 15 17 16 18 19 21 20 22 23 25 24 28 32 36 E Max .680 (17.3) .750 (19.1) .810 (20.6) .870 (22.1) .930 (23.6) 1.000 (25.4) 1.060 (26.9) 1.120 (28.4) 1.180 (30.0) 1.312 (33.3) 1.562 (39.7) 1.688 (42.9) F Max .560 (14.2) .620 (15.7) .690 (17.5) .720 (18.3) .820 (20.8) .880 (22.4) .940 (23.9) 1.000 (25.4) 1.060 (26.9) 1.219 (31.0) 1.483 (37.7) 1.656 (42.1) G Max .500 (12.7) .595 (15.1) .610 (15.5) .700 (17.8) .885 (22.5) .975 (24.8) .975 (24.8) 1.125 (28.6) 1.125 (28.6) 1.225 (31.1) 1.575 (40.0) 1.775 (45.1) H Max 1.670 (42.4) 1.790 (45.5) 1.810 (46.0) 1.880 (47.8) 1.970 (50.0) 2.140 (54.4) 2.140 (54.4) 2.250 (57.2) 2.250 (57.2) 2.420 (61.5) 2.670 (67.8) 2.670 (67.8) TABLE IV: CABLE ENTRY Cable N M Dash Min Max Max No. .625 (15.9) .156 (4.0) .843 (21.4) 01 .750 (19.1) .188 (4.8) .968 (24.6) 02 .875 (22.2) .250 (6.4) 03 1.046 (26.6) 04 1.156 (29.4) 1.000 (25.4) .280 (7.1) 05 1.218 (30.9) 1.125 (28.6) .375 (9.5) 06 1.343 (34.1) 1.250 (31.8) .500 (12.7) 07 1.468 (37.3) 1.375 (34.9) .625 (15.9) 08 1.593 (40.5) 1.500 (38.1) .750 (19.1) 09 1.718 (43.6) 1.625 (41.3) .875 (22.2) 10 1.843 (46.8) 1.750 (44.5) 1.000 (25.4) 11* 2.187 (55.5) 1.875 (47.6) 1.125 (28.6) 12* 2.312 (58.7) 2.000 (50.8) 1.250 (31.8) 13* 2.437 (61.9) 2.125 (54.0) 1.375 (34.9) 14* 2.546 (64.7) 2.250 (57.2) 1.500 (38.1) * Consult factory for availability K Max .413 (10.5) .520 (13.2) .582 (14.8) .645 (16.4) .738 (18.7) .926 (23.5) .926 (23.5) 1.020 (25.9) 1.020 (25.9) 1.145 (29.1) 1.207 (30.7) 1.238 (31.4) L Max 1.720 (43.7) 1.720 (43.7) 1.780 (45.2) 1.870 (47.5) 1.980 (50.3) 2.170 (55.1) 2.170 (55.1) 2.320 (58.9) 2.320 (58.9) 2.370 (60.2) 2.470 (62.7) 2.560 (65.0) Range Max .250 (6.4) .375 (9.5) .438 (11.1) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 1. Shield Support Ring (469-001-XX) is recommended for use in all G-Spring backshells (see page 463-8). 2. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G, H, K and L will not apply. Please consult factory. 3. Metric dimensions (mm) are indicated in parentheses. 4. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 5. Consult factory for shorter lengths on straight backshells. 6. Maximum cable entry available for split elbow is 1.188 (30.2). © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 460 - Page 5