39 390-014 Water-Tight EMI/RFI Cable Sealing Backshell with Strain Relief Type A - Rotatable Coupling - Standard Profile 390 G S 014 M 17 10 C 6 CONNECTOR DESIGNATOR Product Series G Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Connector Designator Strain Relief Style (C, E) ROTATABLE COUPLING TYPE A OVERALL SHIELD TERMINATION Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) Angle and Profile H = 45° J = 90° S = Straight Cable Entry (Tables X, XI) Shell Size (Table I) Basic Part No. Finish (Table II) Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) O-Ring A Thread (Table I) C Typ. (Table I) STYLE 2 (STRAIGHT See Note 1) E (Table III) G (Table III) Length ± .060 (1.52) F (Table III) 1.25 (31.8) Max H (Table III) STYLE 2 (45° & 90° See Note 1) STYLE C Medium Duty (Table X) Clamping Bars T Cable Range © 2005 Glenair, Inc. STYLE E Medium Duty (Table XI) X (See Note 5) Y Cable Range W CAGE Code 06324 Z Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 39 - Page 20 www.glenair.com 39 390-014 Water-Tight EMI/RFI Cable Sealing Backshell with Strain Relief Type A - Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. Shell Size 11 13 15 17 19 23 25 29 33 Dash No. 03 04 06 08 10 12 16 20 24 28 32 Dash No. 03 04 06 08 10 12 16 20 24 28 32 TABLE III: ELBOW DIMENSIONS E F G Max Max Max 1.240 (31.5) 1.050 (26.7) 1.380 (35.1) 1.260 (32.0) 1.070 (27.2) 1.440 (36.6) 1.290 (32.8) 1.100 (27.9) 1.500 (38.1) 1.310 (33.3) 1.120 (28.4) 1.570 (39.9) 1.340 (34.0) 1.150 (29.2) 1.630 (41.4) 1.380 (35.1) 1.190 (30.2) 1.730 (43.9) 1.410 (35.8) 1.220 (31.0) 1.800 (45.7) 1.580 (40.1) 1.390 (35.3) 2.040 (51.8) 1.620 (41.1) 1.430 (36.3) 2.130 (54.1) T Max 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.281 (32.5) 1.281 (32.5) 1.406 (35.7) 1.656 (42.1) 1.906 (48.4) 1.906 (48.4) 2.000 (50.8) H Max 1.190 (30.2) 1.250 (31.8) 1.320 (33.5) 1.380 (35.1) 1.460 (37.1) 1.540 (39.1) 1.610 (40.9) 1.850 (47.0) 1.940 (49.3) TABLE X: CABLE ENTRY Cable Range X W Ref Min Max Max .156 (4.0) .135 (3.4) .812 (20.6) .219 (5.6) .203 (5.2) .188 (4.8) .937 (23.8) .312 (7.9) .281 (7.1) .285 (7.2) 1.062 (27.0) .438 (11.1) .350 (8.9) .312 (7.9) 1.188 (30.2) .531 (13.5) .390 (9.9) .375 (9.5) 1.312 (33.3) .625 (15.9) .500 (12.7) .460 (11.7) 1.562 (39.7) .750 (19.1) .510 (13.0) .625 (15.9) 1.750 (44.5) .938 (23.8) .938 (23.8) .695 (17.7) 2.250 (57.2) 1.250 (31.8) .715 (18.2) 1.000 (25.4) 2.375 (60.3) 1.375 (34.9) .915 (23.2) 1.250 (31.8) 2.625 (66.7) 1.625 (41.3) 1.070 (27.2) 1.500 (38.1) 2.812 (71.4) 1.875 (47.6) TABLE XI: CABLE ENTRY Cable Range Y Z Max Max Max Min .219 (5.6) .739 (18.8) .812 (20.6) .156 (4.0) .312 (7.9) .739 (18.8) .937 (23.8) .188 (4.8) .438 (11.1) .739 (18.8) 1.062 (27.0) .281 (7.1) .531 (13.5) .739 (18.8) 1.188 (30.2) .312 (7.9) .625 (15.9) .791 (20.1) 1.312 (33.3) .375 (9.5) .750 (19.1) .880 (22.4) 1.562 (39.7) .500 (12.7) .938 (23.8) .901 (22.9) 1.750 (44.5) .625 (15.9) 1.250 (31.8) 1.031 (26.2) 2.250 (57.2) .938 (23.8) 1.375 (34.9) 1.250 (31.8) 2.375 (60.3) 1.000 (25.4) 1.625 (41.3) 1.250 (31.8) 2.625 (66.7) 1.250 (31.8) 1.875 (47.6) 1.312 (33.3) 2.812 (71.4) 1.500 (38.1) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. Saddles are bottomed on clamp ears. Add “-445” to Specify Glenair’s Non-Detent, ("NESTOR") Spring-Loaded, Self-Locking Coupling. See Page 41 for Details. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 39 - Page 21 www.glenair.com