JPS10 Series High Performance Solid State Relays For AC Loads up to 2A @ 250Vrms Product Facts ■ Qualified to MIL-PRF-28750D (Mil p/n M28750/10-001Y and M28750/10-002Y). ■ Optically coupled all solid state relay. ■ TTL compatible input. ■ Zero voltage turn-on for low EMI. ■ Custom power package. The JPS10 series solid state relay is designed for AC power switching up to 25 amps at 250Vrms. The circuit employs back-toback photo SCRs with zero voltage turn-on for reliable switching of resistive or reactive loads. TTL compatible input circuitry is optically isolated to 1,500Vrms from the AC load circuit. The relay is offered in two versions: the JPS10-1Y with a maximum zero voltage turn-on window of 15 volts (preferred version for resistive loads), and the JPS10-2Y with a maximum window of 40 volts (preferred version for reactive loads). CII Part Number Military Part Number Zero Crossing Window JPS10-1Y M28750/10-001Y 15 V pk max. JPS10-2Y M28750/10-002Y 40 V pk max. Outline Drawing Circuit Diagram Terminal View + DC Control Source 1 _ .245 ±.025 2 PLS (6.22 ± .63) .040 ±.002 DIA. (1.02 ± .05) 2 .080 ±.002 DIA. (2.03 ± .05) COPPER CORED WIRE 2.41 MAX. (61.2) 3 4 .172 (4.37) - 3 PLS FOR #8 [.164 (4.17)] SCREW CONTRASTING BEAD IS + INPUT TERMINAL 1 2 3 4 1.99 (50.5) 2.05 (52.1) AC Power LOAD .825 (20.96) .505 ±.025 2 PLS (12.83 ± .63) 1.57 MAX. (39.9) TOLERANCE: ±.010 (.25) UNLESS OTHERWISE NOTED TERMINAL NUMBERS SHOWN ARE FOR REFERENCE ONLY, AND DO NOT APPEAR ON RELAY. 1.845 MAX. (46.86) 1.30 MAX. (33.0) © 2005 by Tyco Electronics Corporation. All Rights Reserved. CII and TYCO are trademarks. 1 Catalog 9-177349-0 Revised 4-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 High Performance Electronic Products JPS10 Series High Performance Solid State Relays (Continued) Environmental Characteristics Electrical Specifications (-55°C to +105°C unless otherwise specified) Ambient Temperature Range: Operating: -55°C to +110°C. Storage: -55°C to +125°C. Input Vibration Resistance: 30 G’s, 10-3,000 Hz. Input supply voltage range (Vcc) 4 - 32 Vdc Input current (max.) 16mAdc Must turn-on voltage 4Vdc Shock Resistance: 1,500 G’s, 0.5 ms pulse. Must turn-off voltage Constant Acceleration Resistance (Y1 axis): 5,000 G’s. I/O 1Vdc Reverse voltage protection -32Vdc Dielectric strength (min.) 1,500Vrms/60 Hz. 109 ohms Insulation resistance (min.) @ 500Vdc Capacitance (max.) 20pF Output Mechanical Characteristics Output current rating (max.) 25Arms (Fig. 2, Note 1) Weight (max.): 6 oz. (170 grams) Surge current (max.) 80A pk (Fig. 1, Note 2) Materials: Case: Aluminum, hot tin dipped Terminals: Copper cored wire, gold plated. Transient blocking voltage (max.) Continuous load voltage (max.) 250Vrms 500V pk Frequency range 45 - 440 Hz. Output voltage drop (max.) @ 25A load current 1.5Vrms Off-state leakage current (max.) @ 220Vrms/400 Hz. 10mArms Turn-on time (max.) 1/2 cycle Turn-off time (max.) 1 cycle Off-state dv/dt (min.), with snubber 200V /µs (Note 3) Zero voltage turn-on window (max.), JPS10-1Y 15V pk Zero voltage turn-on window (max.), JPS10-2Y 40V pk Waveform distortion (max.) 4Vrms Output chip junction temperature (max.) 125°C (Note 4) Thermal resistance (max.), junction to ambient 6.8°C/W Thermal resistance (max.), junction to case 1.2°C/W Notes 1. Operation at elevated load currents up to 25 amps is dependent on the use of suitable heatsink to maintain case temperature per Fig. 2. 2. Heating of output chips during and after a surge may cause loss of output blocking capability until junction temperature falls below maximum rating. 3. Internal snubber network is provided across output chips. 4. Case temperature measurement point is center of mounting surface. 1000 800 600 400 200 0 10 Figure 2 - Load Current vs. Temperature Output Current (Amps rms) Peak Surge Current, Non-Repetitive (% of Rated Current) Figure 1 - Peak Surge Current vs. Surge Current Duration 100 1000 Surge Current Duration (mSec) 10,000 26 24 22 20 18 16 14 12 10 8 6 4 2 0 -55 -35 Case Temperature Am bie nt T em per atu re ( W/ OH eat -15 05 25 45 65 Temperature (°C) Sin k) 85 105 125 9-1773439-0–PDF–KRG–4-05 2 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967