TELEDYNE RELAYS Industrial Solid State Products TRTP Series THREE PHASE SCR OUTPUT TO 55 AMPS PER PHASE, 1200 VOLTS PART NUMBERS Package & Chip Type Max Blocking Input Type Voltage (piv)/ Line Rating Output Current Amps Options TRTP-SCR 1200480 600240 55 See Table Below and Page 40 D-DC Input Zero Cross Switching R-DC Input Random Turn-On A-AC Input Zero Cross Switching Options (Add Suffix to Part Number) - See Page 40 for full description -012 -022 FEATURES/BENEFITS • • • • • • EZ MountTM 24 VAC Control • Part Number Example: TRTP1200480A55 MECHANICAL SPECIFICATION • • • Three phase solid state relay in a single space saving package. High temperature plastic housing for mechanical ruggedness. Control status LED is standard. SCR outputs for high dv/dt, current and voltage capability. Choice of AC or DC inputs. Choice of Zero Cross and Random TurnOn versions. Constant Current Input minimizes source current requirement (standard on D and A inputs only) Constructed using Teledyne’s unique PowerthermTM process. This process yields superior thermal impedance and power cycling capabilities through reduced thermal interconnections, allowing for cooler, more reliable operation. The logic drive circuitry sections use the latest in reliable surface mount technology. Certifications: -UL and ULC Recognized File #E128555 -CE # EN60947-1 TYPICAL APPLICATIONS • • See page 42 for mounting information. BLOCK DIAGRAM • • • • • On/Off control of high power AC equipment. Interfacing of microprocessor controls to AC loads - lights, motors, heaters, valves, solenoids etc. Electromechanical line relay replacement. Mercury displacement relay replacement. Industrial and Process Controls. Programmable Controller interface. Robotics motor position and speed controls. GENERAL DESCRIPTION The TRTP series three phase AC Solid State Relays are designed to provide control of high amounts of power in three phase applications. Optical isolation ensures complete protection of the relays circuit control elements from load transients in the load circuit. Teledyne’s advanced design featuring the PowerthermTM process offers users superior thermal management resulting in excellent performance, quality and reliability. page 24 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. TELEDYNE RELAYS TRTP Series Industrial Solid State Products THREE PHASE SCR OUTPUT TO 55 AMPS PER PHASE, 1200 VOLTS ELECTRICAL SPECIFICATIONS INPUT (CONTROL) SPECIFICATIONS Parameter Input Type Control Voltage Range Must Turn-Off Voltage OUTPUT (LOAD) SPECIFICATIONS (Contd) Max D 3 32 R 4 26 A Input Current Min 90 280 D,R(@5Vdc) 30 A(@90Vac) 30 Vdc Vac Vdc A 10 Vac -32 Protection A N/A Vdc Load Voltage Rating D,R 0.25 mA(DC) A 2.5 mA(AC) Over Voltage Range Min Max 600240 24 280 1200480 48 530 47 400 600240 600 1200480 1200 On-State Voltage Drop 1.4 Units 0.05 55 A 600 A 0.35 °C/W Per Phase (Base Temp @85 °C) (Non-Repetitive 16.7 mS) Thermal Resistance Units Comparable Three-phase package The TRTP offers significant packaging benefits Vac Hz VPeak NOTES: V @ Max Rated Current Turn-On Time Output Current Rating Is size a problem? Voltage Code Frequency Range (Note 2) Max Junction to Case (JC) OUTPUT (LOAD) SPECIFICATION Parameter Min Surge Current Rating 1 D,R Parameter mA D,R Reverse Voltage Turn-Off Current Units D,A 8.3 ms R 0.02 ms Turn-Off Time 8.3 ms Leakage Current (Off-State) @25 °C 0.5 mA dV/dt (Typical) 500 V/µs Dielectric Strength (60 hz) 2500 V Insulation Resistance (500Vdc) 109 Ohms Operating Ambient Temperature -40 100 °C Storage Ambient Temperature -55 125 °C Power Factor Range 0.5 1.0 Weight (Typical) 2.2 oz (62.4g) 1.) Where overvoltage transient spikes are present, suppression may be required. A suppressor and/or a snubber circuit across the AC terminals of the module will provide additional transient immunity. 2.) For 400 Hz inductive load, contact factory. 3.) All parameters at 25°C unless otherwise specified Industrial Solid State Products • 800-284-7007 • www.teledynerelays.com page 25