Catalog 1308242 Issued 3-03 AGASTAT SCF series Programmable Time Delay Relay • • • • • • 4 user-programmable timing modes 0.1 sec. to 10 hr. programmable timing range Parameters set with recessed dials Narrow width saves panel space 10A DPDT output relay Socket can be DIN-rail or back panel mounted File E15631(relay) and E140494 (socket) File LR29186 (relay) and LR29513M7 (socket) Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Input Data @ 25°C Modes are user selectable via screwdriver adjustment of recessed 4position selector dial. Modes offered are: On-Delay, Off-Delay, Interval and Latching Interval. Voltage: See Ordering Information section for details. Power Requirement: 2W, max. Timing Specifications Timing Ranges: 0.1 to 3 / 0.33 to 10 / 1 to 30 / 4 to 120 sec.; 0.33 to 10 / 1 to 30 / 2 to 60 min.; 0.33 to 10 hr. Timing Range Selection: Screwdriver select via recessed 8-position selector dial. Timing Adjustment: External knob potentiometer adjustment with reference calibrations. Accuracy: Repeat Accuracy: ± 1% ± 0.01 sec. Overall Accuracy: ± 3% ± 0.01 sec. Reset Time: 30 ms. Relay Operate Time: On-Delay and Interval mode: 55 ms. Relay Release Time: Off-Delay, Interval and Latching Interval: 40 ms. Transient Protection: Non-repetitive transients of the following magnitudes will not cause spurious operation of affect function and accuracy. Operating Voltage <0.1 ms <1 ms 12VDC 1,000V 240V* 24VAC/VDC 1,000V 240V* 48 VAC/VDC 1,000V 480V* 120 VAC, 125VDC 3,000V 2,500V* 240VAC/VDC 3,000V 2,500V* * Minimum source impedance of 100 ohm. Environmental Data Temperature Range: Storage: -40°C to +85°C. Operating: -30°C to +65°C. Contact Data @ 25°C Mechanical Data Arrangements: 2 Form C (DPDT). Rating: 10A @ 28VDC or 120VAC, resistive; 1/3 HP @ 120/240VAC; 345VA. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 500,000 operations, min., at rated resistive load. Mounting/Termination: 11-pin octal-type plug for use with mating socket. Mount relay in horizontal position (pins horizontal, knob down, LEDs up). Status Indication: Power On LED and Output Contacts LED. Weight: Relay: 3.5 oz. (156g) approx.; Socket: 1.7 oz. (48.3g) approx. Initial Dielectric Strength Between Terminals and Case: 1,000VAC plus twice the nominal voltage for one minute. Outline Dimensions M3 X 0.5 CAPTIVE CLAMP SCREWS .84 (21) CLEARANCE HOLE FOR M4 OR #8 MACHINE SCREW 3.29 (84) 1.38 (35) 1.645 (42) 0.372 (10) 1.42 (36) 0.71 (18) SCF TIMER .21 (5) .109 (3) DIA. ANTI-ROTATION PIN BETWEEN TERMS 10 & 2 Ordering Information RX 90 | | Series SCF | Operating Mode | Plug-In = Multiple Modes | 90 Programmable On-Delay | Off-Delay Timer | Interval | Latching Interval | SCF | Mounting RX = Without Socket RF = With Socket BCSF11SC SOCKET Wiring Diagram (Bottom View) 2 | | | | | | | | A | Output Rating A = 10 Amp B = 5 Amp Output A | | | | | | | | Operating Voltage (+10%, –15%) 2 = DPDT Relay A = 120VAC, 50/60 Hz. / 125VDC B = 240VAC, 50/60 Hz. § E = 24VAC, 50/60 Hz. / 24VDC F = 48VAC, 50/60 Hz. / 24VDC Q = 12VDC § Voltage Option B is only available with 5 Amp output option. Authorized distributors are likely to stock the following: None at present. Dimensions are shown for 1218 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover.