R60 Series Features 16 Time Ranges in Single Timer (0.1 sec. to 120 min.) User Sets Time Ranges No Math − Just Flip Switches Instructions Right on Unit Fine Tuning Knob for Precision Timing Pin for Pin Interchangeable with Timers in the Field − No Rewiring AC or DC Operation CMOS Digital Circuitry − 0.5% Repeatable Accuracy • • Programmable, DPDT, 10 Amp, AC or DC, Delay On Operate Time Delay Relays. D35 A B C D E F G H I J Alternate Knob Style .600 (15.24) Switches are recessed. 2.800 (71.12) K L M N O P 4 6 7 2 1 (DC) + (AC) L 8 INPUT − (DC) N (AC) Electrical Specifications CONTINUOUS ON CONTROL POWER OFF OUTPUT SWITCHING 4.0 8.0 15 30 60 120 5 3 1.770 (44.95) DELAY ON OPERATE− The delay period begins when input voltage is applied. At the end of the delay period, the relay will operate and will not release until input voltage is removed. Reset occurs when input voltage is reapplied. 1.0 2.0 4.0 8.0 15 30 DPDT, 2 Form “C” 2.400 (60.96) OPERATION TIME RANGE Min Max 0.1 0.25 0.15 0.5 0.3 1.0 0.5 2.0 1.0 4.0 2.0 8.0 4.0 15 8.0 30 15 60 30 120 Knob Style .242 (6.2) Seconds • • • Minutes • • Contact ON Rating: 10 Amps 240VAC or less, 1/3 HP, 240VAC or 120VAC Pilot Duty 345VA, 120VAC or 240VAC, 50/60HZ Life: 500,000 operations at full load Mechanical Life: 7,000,000 operations at no load DELAY OFF Input Nominal Input voltage: See Chart Steady state input current: See Chart AC or DC OPERATED Timing Nom. Voltage Contact Arr. Input Cur. Nom. Max. Contact Cur. @ 28VDC or 120VAC R60−11AD10−12 12VAC/DC DPDT 167mA 10A D35 R60−11AD10−24 24VAC/DC DPDT 83mA 10A D35 R60−11AD10−120 120VAC/DC DPDT 17mA 10A D35 NTE Type No. Timing adjustment modes available: See Timing Range Chart Diag No. Repeat Accuracy Timing tolerance at high end of range: −0, +10% Timing tolerance at low end of range: +0, −50% Reset Time: 60 mS typ ± 0.5% − after established at steady temperature (4 hours) Protection ACCESSORIES MOUNTING STYLES DESCRIPTION NTE TYPE NO. SURFACE MOUNT 8−PIN OCTAL R95−101 PANEL MOUNT 8−PIN OCTAL R95−118 DIN RAIL MOUNT 8−PIN OCTAL R95−113 DIN RAIL MOUNT 8−PIN OCTAL R95−181 66 NTE Electronics, Inc. Transient: surge test 10,000V for 20 mS Dielectric Breakdown Coil To Contact: 1850 VAC Across Open Contact: 1850 VAC Environmental Characteristics Operating: −20°C to +55°C Weight Std: 4.5 oz (130 grams) approx. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com