R63 Series Features • • Programmable, DPDT, 10 Amp, AC or DC, Interval Time Delay Relays. D35 .242 (6.2) A B C D E F G H I J Alternate Knob Style .600 (15.24) Switches are recessed. 2.800 (71.12) K L M N O P 4 4.0 8.0 15 30 60 120 5 6 3 1.770 (44.95) INTERVAL ON− The relay energizes and timing begins when the input voltage is applied. At the end of the time delay period the relay will de−energize. Reset is accomplished by removing, then reapplying the input voltage. 7 2 (DC) + (AC) L 1 8 INPUT − (DC) N (AC) Electrical Specifications CONTINUOUS ON CONTROL POWER OFF OUTPUT SWITCHING 1.0 2.0 4.0 8.0 15 30 DPDT, 2 Form “C” 2.400 (60.96) OPERATION TIME RANGE Min Max 0.1 0.25 0.15 0.5 0.3 1.0 0.5 2.0 1.0 4.0 2.0 8.0 4.0 15 8.0 30 15 60 30 120 Knob Style Seconds • • • 16 Time Ranges in Single Timer (0.1 sec. to 120 min.) User Sets Time Ranges No Math − Just Flip Switches Instructions Right on Unit Fine Tuning Knob for Precision Timing Pin for Pin Interchangeable with Timers in the Field − No Rewiring AC or DC Operation CMOS Digital Circuitry − 0.5% Repeatable Accuracy Minutes • • Contact ON Rating: 10 Amps 240VAC or less, 1/3 HP, 240VAC or 120VAC Pilot Duty 345VA, 120VAC or 240VAC, 50/60HZ Life: 500,000 operations at full load Mechanical Life: 7,000,000 operations at no load TIME OFF Input Nominal Input voltage: See Chart Steady state input current: See Chart AC or DC OPERATED Timing Max. Contact Cur. @ 28VDC or 120VAC Diag No. Timing adjustment modes available: See Timing Range Chart Nom. Voltage Contact Arr. Input Cur. Nom. R63−11AD10−12 12VAC/DC DPDT 167mA 10A D35 R63−11AD10−24 24VAC/DC DPDT 83mA 10A D35 R63−11AD10−120 120VAC/DC DPDT 17mA 10A D35 NTE Type No. Repeat Accuracy ± 0.5% − after established at steady temperature (4 hours) Timing tolerance at high end of range: −0, +10% Timing tolerance at low end of range: +0, −50% Reset Time: 60 mS typ Protection ACCESSORIES MOUNTING STYLES DESCRIPTION NTE TYPE NO. SURFACE MOUNT 8−PIN OCTAL R95−101 PANEL MOUNT 8−PIN OCTAL R95−118 DIN RAIL MOUNT 8−PIN OCTAL R95−113 DIN RAIL MOUNT 8−PIN OCTAL R95−181 NTE Electronics, Inc. Voice (973) 748−5089 Transient: surge test 10,000V for 20 mS Dielectric Breakdown Coil To Contact: 1850 VAC Across Open Contact: 1850 VAC Environmental Characteristics Operating: −20°C to +55°C Weight Std: 4.5 oz (130 grams) approx. FAX (973) 748−6224 http://www.nteinc.com 69