YM Series 4 Tumbler Miniature Switchlocks Features/Benefits • Snap-together assembly allows for pre-wiring of switch • Wire lead terminations available • 4 Tumbler lock with positive detent Typical Applications • Cable TV connectors • Automotive accessories • Computers Models Available Specifications Materials CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA). 4 AMPS @ 125 V AC, 2 AMPS @ 250 V AC, T65, class 1 (VDE). See page M-17 for additional ratings. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. INDEXING: 90º:2 positions. LOCK: Zinc alloy with stainless steel facing. 4 tumbler single bitted lock with integral detent mechanism. KEYS: Two nickel plated brass keys with code number. SWITCH HOUSING: 6/6 Nylon (UL 94V-2). CONTACTS & TERMINALS: Q contact material: Copper, silver plated. See page L-17 for additional contact materials. MOUNTING NUT: Brass, bright zinc plated. NOTE: Any models supplied with Q or B contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switchlocks with standard options. For information on specific and custom switchlocks, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages L–16 and L–17. For additional options not shown in catalog, consult Customer Service Center. Switch and Lock Function YM0613 SPST, 90º Index, keypull pos. 1 YM061U SPST, 90º Index, keypull pos. 1 & 2 Keying 2 Two nickel plated brass keys L Switchlock Lock Type C 4 Tumbler, single bitted lock with detent Lock Finish 2 Stainless steel facing 8 Gloss black facing Terminations 05 Quick connect WC Wire lead Mounting Style N With nut Contact Material Q Silver B Gold Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–15 www.ck-components.com YM Series 4 Tumbler Miniature Switchlocks SWITCH AND LOCK FUNCTION SWITCH FUNCTION NO. POLES MODEL NO. POS. 1 POS. 2 KEY PULL POSITIONS LOCK CONFIGURATION INDEXING SCHEMATIC POS. 1 YM0613 Position 1 SP OFF 2 ON 90º POS. 1 Positions 1& 2 YM061U 2 SPST Part number shown: YM0613C205NQ All models LEGEND with all options when ordered with ‘Q’ contact material. = Detent Positions (90º ) = Key pull possible in these positions = Stop Positions KEYING 2 LOCK TYPE C TWO NICKEL PLATED BRASS KEYS 1.435 (36,44) .548 (13,91) .174 (4,19) 0029 .772 (19,6) L Switchlock 4 TUMBLER SINGLE BITTED LOCK WITH DETENT Key part number: 119091029 NOTE: All orders keyed alike with code number on key. For more than one key code, replacement keys, or other special features, consult Customer Service Center. LOCK FINISH 2 8 STAINLESS STEEL FACING GLOSS BLACK FACING Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–16 www.ck-components.com YM Series 4 Tumbler Miniature Switchlocks TERMINATIONS 05 WC QUICK CONNECT WIRE LEAD Black wire standard, other colors and lengths available, consult Customer Service Center. UL style 1015. MOUNTING STYLE N WITH NUT PANEL MOUNTING .472 DIA. (11,99 ) .420 (10,67) Nut part number: 179090123 Panel thickness: .300 (7,62) max. CONTACT MATERIAL OPTION CODE RoHS RoHS COMPLIANT * COMPATIBLE* CONTACT AND TERMINAL MATERIAL RATING Q YES YES SILVER 2 POWER B YES YES GOLD 1 LOW LEVEL/DRY CIRCUIT 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 AC V AC (UL/CSA). 0.4 VA MAX. @ 20 V AC or DC MAX. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 2 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). All models with all options when ordered with ‘Q’ contact material. L Switchlock AVAILABLE HARDWARE Key Code: 0029 PART NO. (ONE KEY) 960B10029 Material: Brass Finish: Nickel plate Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–17 www.ck-components.com