PM Series 5 Tumbler Miniature Snap-in Switchlocks Features/Benefits • International agency listings • Snap-in mounting • Wire lead terminations available • 5 Tumbler lock with positive detent Typical Applications • Computers • Point-of-sale terminals • Marine equipment Models Available Specifications Materials CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA); 4 AMPS @ 125 V AC, 2 AMPS @ 250 V AC, T65 (VDE). See page M-33 for additional ratings. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. INDEXING: 90º:2 positions. LOCK: 6/6 nylon with matte finish (UL 94V-2), color black, 5 tumbler, single bitted lock with integral detent mechanism. KEYS: Two nickel plated brass keys with black plastic head, other colors available. SWITCH HOUSING: 6/6 nylon (UL 94V-2). CONTACTS & TERMINALS: Q contact material: Copper, silver plated. See page L-33 for additional contact materials. NOTE: Any models supplied with Q or B contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switchlocks with standard options. For information on specific and custom switchlocks, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages L–32 and L-33. For additional options not shown in catalog, consult Customer Service Center. Switch and lock Function PM0613 SP, 90º, Index, keypull pos. 1 PM061U SP, 90º Index, keypull pos. 1 & 3 Keying E Two nickel plated brass keys with insert molded plastic head Lock Type B 5 Tumbler lock with detent L Switchlock Lock Finish M Plastic lock with matte finish Terminations 05 Quick connect WC Wire lead Lock Style K Cone shaped facing Contact Material Q Silver B Gold Lock Color 2 Black Key Color 2 Black Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–31 www.ck-components.com PM Series 5 Tumbler Miniature Snap-in Switchlocks SWITCH AND LOCK FUNCTION SWITCH FUNCTION NO. POLES MODEL NO. POS. 1 KEY PULL POSITIONS POS. 2 LOCK CONFIGURATION INDEXING POS. 1 PM0613 Position 1 POS. 2 SP OFF ON 90º POS. 1 Positions 1 & 2 PM061U POS. 2 SP Part number shown: PM0613EBM05KQ22 All models LEGEND with all options when ordered with ‘Q’ contact material. = Detent Position (90º ) = Key pull possible in these positions. = Stop Positions KEY COLOR KEYING KEYING E TWO NICKEL PLATED BRASS KEYS WITH INSERT MOLDED PLASTIC HEAD OPTION CODE 2 Switchlock L KEY COLOR BLACK Key part number: 334C1004102 NOTE: Molded plastic head color is black, standard. For more than one key code, replacement keys, or other special features, consult Customer Service Center. LOCK COLOR LOCK TYPE LOCK TYPE B 5 TUMBLER LOCK WITH DETENT OPTION CODE 2 LOCK COLOR BLACK Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–32 www.ck-components.com PM Series 5 Tumbler Miniature Snap-in Switchlocks LOCK FINISH M PLASTIC LOCK WITH MATTE FINISH TERMINATIONS 05 WC QUICK CONNECT WIRE LEAD UL style 1015. Black wire standard, other colors and lengths available, consult Customer Service Center. LOCK STYLE K PANEL MOUNTING CONE SHAPED FACING Panel thickness: .050-.080 (1,27-2,03) CONTACT MATERIAL OPTION CODE RoHS RoHS COMPLIANT* COMPATIBLE* CONTACT AND TERMINAL MATERIAL RATING Q YES YES SILVER 2 POWER B YES YES GOLD 1 LOW LEVEL/DRY CIRCUIT 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA). 4 AMPS @ 125 V AC; or 2 AMPS @ 250 V AC; T65 (VDE). 0.4 VA MAX. @ 20 V AC or DC MAX. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. L CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). All models with all options when ordered with ‘Q’ contact material. AVAILABLE HARDWARE Key Code: 041 PART NO. (ONE KEY) 334C1004102 BLACK Material: Brass Finish: Nickel plate 6/6 Nylon insert molded head Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–33 www.ck-components.com Switchlock 1 2