YF Series 4 Tumbler Miniature Switchlocks Features/Benefits PCB mounting Multi-pole and multi-position H Positive detent Low level and power capability Switchlock Models Available Typical Applications Computer servers Point-of-sale terminals Cash registers Build-A-Switch Our easy Build-A-Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. A switchlock with standard options is shown on page H-12. Available options are shown and described on pages H-12 thru H-14. For additional options not shown in catalog, consult Customer Service Center. Typical Example: Y F 0 0 1 3 2 C 2 0 3 N Q Switch and Lock Function YF0013 (STD.) SP, 45 Index, keypull pos. 1 YF2013 DP, 45 Index, keypull pos. 1 Keying YF001C SP, 45 Index, keypull pos. 3 2 (STD.) Two nickel plated brass keys YF201C DP, 45 Index, keypull pos. 3 YF001U SP, 45 Index, keypull pos. 1 & 3 Lock Type YF201U DP, 45 Index, keypull pos. 1 & 3 C (STD.) 4 Tumbler, single bitted YF0113 SP, 90 Index, keypull pos. 1 lock with detent YF2113 DP, 90 Index, keypull pos. 1 Lock Finish YF011C SP, 90 Index, keypull pos. 2 2 (STD.) Stainless steel facing YF211C DP, 90 Index, keypull pos. 2 8 Gloss black facing F Polished nickel facing YF011U SP, 90 Index, keypull pos. 1 & 2 YF211U DP, 90 Index, keypull pos. 1 & 2 Terminations YF4513 SP W/Common, 45 Index, keypull pos. 1 03 (STD.) Solder lug with hole YF451C SP W/Common, 45 Index, keypull pos. 3 01 Solder lug with notch 02 PC Thru-hole YF451U SP W/Common, 45 Index, keypull pos. 1 & 3 07 Solder lug with hole (YF45 models) Mounting Style WC Wire lead N (STD.) With nut Contact Material Q (STD.) Silver B Gold G Gold over silver Seal NONE (STD.) No seal E Epoxy seal C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 Rev. A 8/99 H-11 YF Series 4 Tumbler Miniature Switchlocks Switchlock H Specifications Materials CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL / CSA). See page H-14 for additional ratings. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 10 milliohms typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 ohms min. DIELECTRIC STRENGTH: 1,000 V RMS min. @ sea level. INDEXING: 45 - 3 pos. max. Models with common terminal, 45 - 3 pos. max. 90 - 2 pos. max. LOCK: Zinc alloy with stainless steel facing. 4 tumbler, single bitted lock with integral detent mechanism. KEYS: Two nickel plated brass keys with code number. SWITCH HOUSING: 6/6 Nylon (UL 94V-2). CONTACTS & TERMINALS: Q contact material: Copper, silver plated. See page H-14 for additional contact materials. MOUNTING NUT: Brass, bright zinc plated. TERMINAL SEAL: Epoxy. NOTE: Specifications and materials listed above are for switchlocks with standard options. For information on specific and custom switchlocks, consult Customer Service Center. SWITCHLOCK WITH STANDARD OPTIONS TERM. NOS. MOLDED ON HOUSING YF00132C203NQ SP PART NUMBER YF00132C203NQ ÑÑÑÑ ÑÑÑÑ NO. POLES INDEXING SP 45 NOTE: For panel mounting information, see page H-14. SWITCH AND LOCK FUNCTION SINGLE & DOUBLE POLE SWITCHES CONNECTED TERMINALS O NO. POLES O MODEL NO. POS. 1 POS. 2 POS. 3 KEY PULL POSITIONS SP DP YF0013 YF2013 8-1 8-1, 4-5 1-2 1-2, 5-6 2-3 2-3, 6-7 Position 1 SP DP YF001C YF201C 8-1 8-1, 4-5 1-2 1-2, 5-6 2-3 2-3, 6-7 Position 3 SP DP YF001U YF201U 8-1 8-1, 4-5 1-2 1-2, 5-6 2-3 2-3, 6-7 Positions 1 & 3 SP DP YF0113 YF2113 8-1 8-1, 4-5 1-3 1-3, 5-7 Position 1 SP DP YF011C YF211C 8-1 8-1, 4-5 1-3 1-3, 5-7 Position 2 SP DP YF011U YF211U 8-1 8-1, 4-5 1-3 1-3, 5-7 Positions 1 & 2 All models H-12 OC LOCK CONFIGURATION INDEXING POS. 1 2 3 TERMINAL NUMBERS POS. 1 2 3 45° POS. 1 2 3 POS. 1 Terminal numbers molded on bottom of housing. 2 POS. 1 2 90° POS. 1 2 with all options when ordered with ‘G’ or ‘Q’ contact material. C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 Rev. A 8/99 YF Series 4 Tumbler Miniature Switchlocks SWITCH AND LOCK FUNCTION SINGLE POLE SWITCHES WITH COMMON H CONNECTED TERMINALS MODEL NO. POS. 1 POS. 2 KEY PULL POSITIONS POS. 3 YF4513 LOCK CONFIGURATION TERMINAL NUMBERS INDEXING Switchlock NO. POLES POS. 1 2 Position 1 3 SP WITH COMMON YF451C C-1 C-3 POS. 1 2 Position 3 C-2 45° 3 POS. 1 YF451U Terminal numbers marked on bottom of insulator. 2 Positions 1 & 3 3 LEGEND All models with all options when ordered with ‘G’ or ‘Q’ contact material. C = Common = Detent Positions (45 or 90) = Key pull possible in these positions. = Stop Positions KEYING 2 LOCK TYPE C (STD.) TWO NICKEL PLATED BRASS KEYS 1.435 (36,44) (STD.) 4 TUMBLER, SINGLE BITTED LOCK WITH DETENT .174 (4,19) 0029 .548 (13,91) .772 (19,6) Key part number: 119091029 NOTE: All orders keyed alike with code number on key. For more than one key code, replacement keys, or other special features, consult Customer Service Center. LOCK FINISH 2 8 (STD.) STAINLESS STEEL FACING F GLOSS BLACK FACING POLISHED NICKEL PLATED FACING TERMINATIONS 03 (STD.) SOLDER LUG WITH HOLE 01 02 SOLDER LUG WITH NOTCH PC THRU-HOLE WC WIRE LEAD Black wire standard, other colors and lengths available, consult Customer Service Center. UL style 1015. YF0X & YF2X Models C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 Rev. A 8/99 H-13 YF Series 4 Tumbler Miniature Switchlocks TERMINATIONS 02 07 PC THRU-HOLE WC SOLDER LUG WITH HOLE WIRE LEAD PC MOUNTING Switchlock H Black wire standard, other colors and lengths available, consult Customer Service Center. UL style 1015. YF45 Models MOUNTING STYLE N Switch and Lock Assembly Instructions (STD.) WITH NUT LOCK MUST BE IN PANEL BEFORE ATTACHING SWITCH BASE PANEL MOUNTING KEY SHOWN IN POSITION ONE SWITCH BASE .472 DIA. (11,99) .420 (10,67) ALIGN TAB WITH SLOT AND SNAP TOGETHER 4 TUMBLER LOCK Panel thickness: .300 (7,62) max. Nut part number: 179090123 NOTE: Switch installation is permanent. Switch cannot be removed from lock after assembly. Attempts to separate switch and lock may damage switch. CONTACT MATERIAL OPTION CODE CONTACT AND TERMINAL MATERIAL RATINGS SILVER 2 POWER B GOLD 1 LOW LEVEL / DRY CIRCUIT G GOLD OVER SILVER 3 LOW LEVEL / DRY CIRCUIT OR POWER Q (STD.) 4 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC (UL / CSA). 0.4 VA MAX. @ 20 V AC OR DC MAX. 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 4 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC (UL / CSA). CONTACT MATERIAL / APPLICATION RECOMMENDATIONS — SEE CHART, PAGE L-31. 1 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). 3 CONTACTS & TERMINALS: Copper, with gold plate over silver plate. All models with all options when ordered with ‘G’ or ‘Q’ contact material. 2 NOTE: ‘G’ contact material is equivalent to both ‘B’ and ‘Q’ contact materials. SEAL NONE (STD.) NO SEAL E EPOXY SEAL Not available on YF45 models. H-14 C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 Rev. A 8/99