301U(R) Series Vishay High Power Products Standard Recovery Diodes (Stud Version), 300 A FEATURES • Wide current range RoHS • High voltage rating up to 2500 V COMPLIANT • High surge current capabilities • Stud cathode and stud anode version • High resistance to acceleration DO-205AB (DO-9) • RoHS compliant • Designed and qualified for industrial level TYPICAL APPLICATIONS • Converters PRODUCT SUMMARY IF(AV) • Power supplies 300 A • Machine tool controls • High power drives • Medium traction applications MAJOR RATINGS AND CHARACTERISTICS 301U(R) PARAMETER TEST CONDITIONS IF(AV) UNITS 160 TO 200 250 330 300 A 120 120 °C 520 470 A 50 Hz 8250 6050 60 Hz 8640 6335 50 Hz 340 183 60 Hz 311 167 Range 1600 to 2000 2500 V - 40 to 180 - 40 to 180 °C TC IF(RMS) A IFSM I2 t VRRM TJ kA2s ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 160 1600 1700 200 2000 2100 250 2500 2600 301U(R) Document Number: 93509 Revision: 23-Jun-08 For technical questions, contact: [email protected] IRRM MAXIMUM AT TJ = TJ MAXIMUM mA 15 www.vishay.com 1 301U(R) Series Vishay High Power Products Standard Recovery Diodes (Stud Version), 300 A FORWARD CONDUCTION PARAMETER SYMBOL Maximum average forward current at case temperature Maximum RMS forward current IF(AV) IF(RMS) Maximum peak, one cycle forward, non-repetitive surge current IFSM TEST CONDITIONS 180° conduction, half sine wave Maximum I2√t for fusing A 120 °C A 520 470 6050 8640 6335 6940 5090 7270 5330 340 183 311 167 241 129 220 118 t = 0.1 to 10 ms, no voltage reapplied 3400 1830 t = 10 ms t = 8.3 ms t = 10 ms t = 8.3 ms I2√t 300 120 8250 t = 8.3 ms No voltage reapplied 100 % VRRM reapplied No voltage reapplied Sinusoidal half wave, initial TJ = TJ maximum 100 % VRRM reapplied UNITS 330 t = 10 ms t = 8.3 ms I2 t 250 DC at TC = 115 °C (up to 2000 V), TC = 102 °C (2500 V) t = 10 ms Maximum I2t for fusing 301U(R) 160 TO 200 Low level value of threshold voltage VF(TO)1 (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum 0.77 0.90 High level value of threshold voltage VF(TO)2 (I > π x IF(AV)), TJ = TJ maximum 0.84 0.97 Low level value of forward slope resistance rf1 (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum 0.49 0.59 High level value of forward slope resistance rf2 (I > π x IF(AV)), TJ = TJ maximum 0.49 0.55 Ipk = 942 A, TJ = TJ maximum, tp = 10 ms sinusoidal wave 1.22 1.46 A kA2s kA2√s V mΩ Maximum forward voltage drop VFM V THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction operating temperature range TEST CONDITIONS VALUES TJ - 40 to 180 Maximum storage temperature range TStg - 40 to 200 Maximum thermal resistance, junction to case RthJC DC operation 0.14 Maximum thermal resistance, case to heatsink RthCS Mounting surface, smooth, flat and greased 0.08 °C K/W Maximum allowed mounting torque + 0 - 20 % Weight Case style www.vishay.com 2 UNITS Not lubricated threads 37 Lubricated threads 28 301U 250 ± 5 303U 152 ± 5 305U 177 ± 5 307U 197 ± 5 309U 160 ± 5 See dimensions - link at the end of datasheet For technical questions, contact: [email protected] N·m g DO-205AB (DO-9) Document Number: 93509 Revision: 23-Jun-08 301U(R) Series Standard Recovery Diodes Vishay High Power Products (Stud Version), 300 A ΔRthJC CONDUCTION SINUSOIDAL CONDUCTION CONDUCTION ANGLE RECTANGULAR CONDUCTION 80 TO 200 250 80 TO 200 250 180° 0.015 0.015 0.011 0.011 120° 0.018 0.018 0.019 0.019 90° 0.023 0.023 0.025 0.025 60° 0.034 0.034 0.035 0.035 30° 0.056 0.056 0.057 0.057 TEST CONDITIONS UNITS TJ = TJ maximum K/W 301U(R) Series(1600V to 2000V) RthJC (DC) = 0.14 K/ W 170 160 Conduction Angle 150 140 130 30° 180° 60° 120 90° 120° 110 0 50 100 150 200 250 300 350 Maximum Allowable Case Temperat ure (°C) 180 180 301U(R) Series (2500V) RthJC (DC) = 0.14 K/ W 170 160 150 Conduction Angle 140 30° 60° 130 90° 120 120° 180° 110 0 50 100 150 200 250 300 350 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Ratings Characteristics Fig. 3 - Current Ratings Characteristics 180 301U(R) Series(1600V to 2000V) RthJC (DC) = 0.14 K/ W 170 160 150 Conduction Period 140 130 30° 60° 120 90° 120° 110 180° 100 0 100 200 300 400 DC 500 600 Maximum Allowable Case Temperature (°C) Maximum Allowable Case Temperature (°C) Maximum Allowable Case Temperature (°C) Note • The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC 180 301U(R) Series (2500V) 170 RthJC (DC) = 0.14 K/ W 160 150 Conduction Period 140 130 120 30° 60° 110 90° 120° 100 180° DC 90 0 100 200 300 400 500 Average Forward Current (A) Average Forward Current (A) Fig. 2 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics Document Number: 93509 Revision: 23-Jun-08 For technical questions, contact: [email protected] www.vishay.com 3 301U(R) Series Vishay High Power Products Standard Recovery Diodes 400 A hS 1 0. W K/ 0. 3 = K/ W ta el -D 250 W K/ 300 Rt 180° 120° 90° 60° 30° 350 2 0. RMSLimit R Maximum Avera ge Forward Power Loss (W) (Stud Version), 300 A 200 0.7 K/ W 150 Conduction Angle 100 1.5 K / 301U(R) Series (1600V to 2000V) TJ = 180°C 50 W 3 K/ W 0 0 50 100 150 200 250 300 350 20 40 60 80 100 120 140 160 180 Maximum Allowable Ambient Temperature (°C) Average Forward Current (A) 550 DC 180° 120° 90° 60° 30° 500 400 350 R SA 450 th Maximum Average Forward Power Loss (W) Fig. 5 - Forward Power Loss Characteristics 0. 2 = 0. 1 K/ W -D el ta K/ W R 0.3 K/ W 300 250 RMSLimit 200 Conduc tion Period 150 301U(R) Series (1600V to 2000V) TJ = 180°C 100 50 0.7 K/ W 1.5 K/ W 3 K/ W 0 0 100 200 300 400 500 600 20 40 Average Forward Current (A) 60 80 100 120 140 160 180 Maximum Allowable Ambient Temperature (°C) 450 180° 120° 90° 60° 30° K/ W W K/ ta el -D 0. 3 1 0. 300 0. 2 = 350 SA 400 R th K/ W R Maximum Average Forward Power Loss(W) Fig. 6 - Forward Power Loss Characteristics RMSLimit 250 200 0.7 K/ W 150 Conduction Angle 100 301U(R) Series (2500V) 50 1.5 K / W 3 K/ W TJ = 180°C 0 0 50 100 150 200 250 Average Forward Current (A) 300 20 40 60 80 100 120 140 160 180 Maximum Allowable Ambient Temperature (°C) Fig. 7 - Forward Power Loss Characteristics www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 93509 Revision: 23-Jun-08 301U(R) Series 600 DC 180° 120° 90° 60° 30° 500 SA 400 R th Maximum Average Forward Power Loss(W) Standard Recovery Diodes Vishay High Power Products (Stud Version), 300 A = 0. 2K /W 0. 1 K/ W -D el ta R 0.3 K/ W 300 RMS Limit Conduction Period 200 0.7 K/ W 301U(R) Series (2500V) TJ = 180°C 100 1.5 K/ W 3 K/ W 0 0 100 200 300 400 Average Forward Current (A) 500 20 40 60 80 100 120 140 160 180 Maximum Allowable Ambient Temperature (°C) At Any Rated Load Condition And With Rated VRRM Applied Following Surge. 7000 Initial TJ = 180°C @60 Hz 0.0083 s @50 Hz 0.0100 s 6000 5000 4000 3000 301U(R) Series (1600V to 2000V) 2000 Peak Half Sine Wave Forward Current (A) 1 10 Peak Half Sine Wave Forward Current (A) 8000 100 6000 At Any Rated Load Condition And With Rated VRRM Applied Following Surge. Initial TJ = 180°C 5000 @60 Hz 0.0083 s @50 Hz 0.0100 s 4500 5500 4000 3500 3000 2500 2000 301U(R) Series (2500V) 1500 1 10 100 Number Of Equa l Amplitude Half Cycle Current Pulses (N) Number Of Equa l Amplitude Half Cyc le Current Pulses (N) Fig. 9 - Maximum Non-Repetitive Surge Current Fig. 11 - Maximum Non-Repetitive Surge Current 9000 8000 7000 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial TJ = 180 °C No Voltage Reapplied Rated VRRM Reapplied 6000 5000 4000 3000 2000 301U(R) Series (1600V to 2000V) 1000 0.01 0.1 1 Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) Fig. 8 - Forward Power Loss Characteristics 6000 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial TJ = 180 °C 5000 No Voltage Reapplied Rated VRRM Reapplied 4000 3000 2000 301U(R) Series (2500V) 1000 0.01 Pulse Train Duration (s) Fig. 10 - Maximum Non-Repetitive Surge Current Document Number: 93509 Revision: 23-Jun-08 0.1 1 Pulse Train Duration (s) Fig. 12 - Maximum Non-Repetitive Surge Current For technical questions, contact: [email protected] www.vishay.com 5 301U(R) Series Vishay High Power Products Standard Recovery Diodes (Stud Version), 300 A 10000 TJ = 25°C Instantaneous Forward Current (A) Instantaneous Forward Current (A) 10000 TJ = 180°C 1000 100 301U(R) Series (1600V to 2000V) TJ = 25°C TJ = 180°C 1000 100 301U(R) Series (2500V) 10 10 0 0.5 1 1.5 2 2.5 0 3 0.5 1 1.5 2 2.5 3 3.5 Fig. 13 - Forward Voltage Drop Characteristics Fig. 14 - Forward Voltage Drop Characteristics Transient Thermal Impedance Z thJC (K/ W) Instantaneous Forward Voltage (V) Instantaneous Forward Voltage (V) 1 0.1 Steady State Value: RthJC = 0.14 K/ W (DC Operation) 0.01 301U(R) Series 0.001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 15 - Thermal Impedance ZthJC Characteristic www.vishay.com 6 For technical questions, contact: [email protected] Document Number: 93509 Revision: 23-Jun-08 301U(R) Series Standard Recovery Diodes Vishay High Power Products (Stud Version), 300 A ORDERING INFORMATION TABLE Device code 30 1 U A 250 1 2 3 4 5 1 - 2 - 30 = Essential part number 1 = Standard device 3 = Top threaded version 5 = Type for rotating application with top threaded version 3/8 16UNC-2A 7 = Type for rotating application with flexible lead 9 = Type for rotating application with top threaded version 3/8 24UNF 3 - U = Stud normal polarity (cathode to stud) 4 - A = Maximum leakage selection IRRM = 2 mA TJ = 25 °C 5 - Voltage code x 10 = VRRM (see Voltage Ratings table) UR = Stud reverse polarity (anode to stud) LINKS TO RELATED DOCUMENTS Dimensions Document Number: 93509 Revision: 23-Jun-08 http://www.vishay.com/doc?95337 For technical questions, contact: [email protected] www.vishay.com 7 Outline Dimensions Vishay Semiconductors DO-205AB (DO-9), B-60, B-61, B-41, B-40 for 301U(R), 307U(R), 305U(R) and 309U(R) Series DIMENSIONS FOR 301U(R) SERIES - DO-205AB (DO-9) in millimeters (inches) 19 (0.75) MAX. Ceramic housing 24 (0.94) MAX. Ø 8.7 (0.34) MAX. 140 (5.51) 146 (5.75) 28 (1.10) MAX. 21(0.83) MAX. 3/4"-16UNF-2A for metric device: M16 x 1.5 contact factory 32 (1.26) Document Number: 95337 Revision: 22-Jul-08 3.9 (0.15) For technical questions, contact: [email protected] www.vishay.com 1 Outline Dimensions Vishay Semiconductors DO-205AB (DO-9), B-60, B-61, B-41, B-40 for 301U(R), 307U(R), 305U(R) and 309U(R) Series DIMENSIONS FOR 307U(R) SERIES - B-60 in millimeters (inches) Ceramic housing 19 (0.75) MAX. 11 (0.43) NOM. 12 (0.47) MIN. Ø 8.5 (0.33) 140 (5.51) 148 (5.83) 54 (2.13) MAX. 21 (0.83) MAX. 3/4"-16UNF-2A 32 (1.26) www.vishay.com 2 3.9 (0.15) For technical questions, contact: [email protected] Document Number: 95337 Revision: 22-Jul-08 Outline Dimensions DO-205AB (DO-9), B-60, B-61, B-41, B-40 for Vishay Semiconductors 301U(R), 307U(R), 305U(R) and 309U(R) Series DIMENSIONS FOR 305U(R) SERIES - B-61 in millimeters (inches) Ceramic housing 3/8"-16UNC-2A 6.4 (0.25) MAX. 98 (3.86) MAX. 59 (2.32) MAX. 7 (0.28) MAX. 21 (0.83) MAX. 3/4"-16UNF-2A 16 (0.63) 32 (1.26) DIMENSIONS FOR 309U(R) SERIES - B-41 in millimeters (inches) Ceramic housing 3/8"-24UNF-2A 7.6 (0.3) MAX. 97 (3.82) MAX. 60 (2.36) MAX. 7 (0.28) MAX. 21 (0.83) MAX. 3/4"-16UNF-2A 32 (1.26) Document Number: 95337 Revision: 22-Jul-08 17.5 (0.69) For technical questions, contact: [email protected] www.vishay.com 3 Outline Dimensions Vishay Semiconductors DO-205AB (DO-9), B-60, B-61, B-41, B-40 for 301U(R), 307U(R), 305U(R) and 309U(R) Series DIMENSIONS FOR 303U(R) SERIES - B-40 in millimeters (inches) Ceramic housing 3/8"-24UNF-2A 16.5 (0.65) MAX. Ø 27.3 (1.07) MAX. 59.7 (2.35) MAX. 29 (1.14) MAX. 9 (0.35) MAX. 21 (0.83) MAX. 3/4"-16UNF-2A 32 (1.26) www.vishay.com 4 17.5 (0.69) For technical questions, contact: [email protected] Document Number: 95337 Revision: 22-Jul-08 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000