Round Cables AWG 28 (7/0.1.27mm) Multi Pair Cable (30V, 80°C) Specifications (with Shield) Conductor Resistance: Insulation Resistance: Dielectric Strength: Capacitance: Impedance: Propagation Delay: Near-End Crosstalk: Flame Resistance: Part Number (Details) 222Ω/km max. 1MΩ min. (km) 500V AC / minute 138pF/m approx. (at 1KHz) 50Ω approx. 4.8ns/m approx. 3.8% approx. VW-1 7/0.127 Cable Series Number of Pairs (1 Pair = 2 Conductors) Shield Requirements: SV = With Cu -Shield ALSV = With Double Shield (Aluminium Foil and Braided Copper) Materials and Finish Insulation: Conductor: Shielding: Jacket: 40P VX10 - * Irradiated PVC 28 AWG (7/0.127mm) stranded copper wire Aluminium foil and/or Braided copper and a 28 AWG drain wire PVC, colour warm grey Standard Cable Length 100 meters per coil Features High Density Multi twisted-pair cable with 28AWG conductors in a round PVC jacket Irradiated PC thin insulation enables 50MIL (1.27mm) flat ends to accept SCSI type High Density IDC connectors Braided shielding minimize RFI / EMI. Special double shielding available (= ALSV) UL Style No. 20276 Cable Dimensions Pair Conductor Insulation Drain Wire Braided Sheild Sheath Jacket Standard Types Part Number 7/0.127 5P VX10-ALSV 7/0.127 10P VX10-ALSV 7/0.127 13P VX10-ALSV 7/0.127 20P VX10-SV 7/0.127 25P VX10-ALSV No. of Cond. PVC Sheath Outer Dia. PVC Insulation Outer Dia. 10 20 26 40 50 5.2 6.1 6.5 7.0 8.0 0.58 0.58 0.58 0.58 0.58 For the following versions please contact Yamaichi, minimum order quantity may be required 7/0.127 5P VX10-SV 7/0.127 10P VX10-SV 7/0.127 13P VX10-SV 7/0.127 18P VX10-* 7/0.127 20P VX10-ALSV 7/0.127 25P VX10-SV 7/0.127 30P VX10-* 7/0.127 32P VX10-* 7/0.127 40P VX10-* 7/0.127 50P VX10-* Sockets and Connectors 10 20 26 36 40 50 60 64 80 100 5.2 6.1 6.5 7.0 7.2 5.2 8.2 8.3 9.5 9.9 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Trading Division