Flat / Round Cables 25MIL (0.635mm) OKIFLEX-SFX Type (150V, 80°C) Part Number SFX - S2 Specifications Conductor Resistance: Insulation Resistance: Dielectric Strength: Flame Resistance: 358Ω/km max. 5MΩ min. (km) 1,500V AC / minute VW-1 ** - 7/0.1 3030 - SV Cable Series Number of Conductors Shield Requirements: SV = With Shield (Standard) Materials and Finish Insulation: PVC Conductor: 30 AWG (7/0.1mm) stranded copper wire Shielding: Braided copper together with a 28 AWG drain wire Jacket: PVC, colour warm grey Standard Cable Length 61 meters per coil Features High Density/Half Pitch 25MIL (0.635mm) flat cable formed in an ‘S’ shape within a PVC jacket for external wiring Designed to accept High Density IDC connectors Bonded/unbonded at 30mm regular intervals Shielded versions for RFI / EMI noise reduction UL Style No. 20266 Cable Dimensions Insulation Red Edge Conductor Tape 0.635 Min 0.16 Drain Wire 0.64 Red Edge Min 0.16 Jacket (PVC Sheath) (Number of conductors –1) x 0.635 Shield Number of conductors x 0.635 OKIFLEX-S2 Type Standard Types Part Number SFX-S2 20-7/0.1 3030-SV SFX-S2 26-7/0.1 3030-SV SFX-S2 40-7/0.1 3030-SV No. of Conductors PVC Sheath Outer Dia. 20 26 40 6.3 7.0 7.6 Part Number SFX-S2 50-7/0.1 3030-SV SFX-S2 64-7/0.1 3030-SV SFX-S2 100-7/0.1 3030-SV No. of PVC Sheath Conductors Outer Dia. 50 64 100 8.1 10.1 11.0 For the following versions please contact Yamaichi, minimum order quantity may be required SFX-S2 34-7/0.1 3030-SV SFX-S2 60-7/0.1 3030-SV SFX-S2 80-7/0.1 3030-SV 34 60 80 7.3 9.6 10.6 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Trading Division Sockets and Connectors