74LVC1G10 SINGLE 3 INPUT POSITIVE NAND GATE Description Pin Assignments The 74LVC1G10 is a single 3-input positive NAND gate with a standard totem pole output. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified for NEW PRODUCT partial power down applications using IOFF. The IOFF circuitry disables the output preventing damaging current backflow when the device is powered down. The gate performs the positive Boolean function: Y = A •B •C or Y = A +B+C Features Applications • Wide Supply Voltage Range from 1.65V to 5.5V • Voltage Level Shifting • ± 24mA Output Drive at 3.3V • General Purpose Logic • CMOS low power consumption • Power Down Signal Isolation • IOFF Supports Partial-Power-Down Mode Operation • Wide array of products such as: • Inputs accept up to 5.5V o PCs, networking, notebooks, netbooks, PDAs • ESD Protection Exceeds JESD 22 o Computer peripherals, hard drives, CD/DVD ROM 200-V Machine Model (A115-A) o TV, DVD, DVR, set top box 2000-V Human Body Model (A114-A) o Cell Phones, Personal Navigation / GPS • Latch-Up Exceeds 100mA per JESD 78, Class II o MP3 players ,Cameras, Video Recorders • Range of Package Options • SOT26, SOT363, and DFN1010: Available in “Green” • Lead Free Finish/ RoHS Compliant (Note 1) Molding Compound (no Br, Sb) Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. 74LVC1G10 Document number: DS35121 Rev. 1 - 2 1 of 14 www.diodes.com December 2010 © Diodes Incorporated 74LVC1G10 SINGLE 3 INPUT POSITIVE NAND GATE Pin Descriptions NEW PRODUCT Pin Name A GND B Y Vcc C Description Data Input Ground Data Input Data Output Supply Voltage Data Input Logic Diagram 1 A 4 3 6 B C Y Function Table Inputs B H X L X A H L X X C H X X L Output Y L H H H Absolute Maximum Ratings (Note 2) Symbol Description Rating Unit 2 KV 200 V Supply Voltage Range -0.5 to 6.5 V VI Input Voltage Range -0.5 to 6.5 V Vo Voltage applied to output in high impedance or IOFF state -0.5 to 6.5 V Vo Voltage applied to output in high or low state -0.3 to VCC +0.5 V IIK Input Clamp Current VI<0 -50 mA IOK Output Clamp Current -50 mA IO Continuous output current ±50 mA Continuous current through Vdd or GND ±100 mA Operating Junction Temperature -40 to 150 °C Storage Temperature -65 to 150 °C ESD HBM Human Body Model ESD Protection ESD MM Machine Model ESD Protection VCC TJ TSTG Notes: 2. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. 74LVC1G10 Document number: DS35121 Rev. 1 - 2 2 of 14 www.diodes.com December 2010 © Diodes Incorporated 74LVC1G10 SINGLE 3 INPUT POSITIVE NAND GATE Recommended Operating Conditions (Note 3) NEW PRODUCT Symbol VCC Operating Voltage VIH High-level Input Voltage VIL Low-level input voltage VI VO Input Voltage Output Voltage Parameter Operating Data retention only VCC = 1.65 V to 1.95 V VCC = 2.3 V to 2.7 V VCC = 3 V to 3.6 V VCC = 4.5 V to 5.5 V VCC = 1.65 V to 1.95 V VCC = 2.3 V to 2.7 V VCC = 3 V to 3.6 V VCC = 4.5 V to 5.5 V Min 1.65 1.5 0.65 X VCC 1.7 2 0.7 X VCC 0 0 VCC = 1.65 V VCC = 2.3 V IOH High-level output current VCC = 3 V VCC = 4.5 V VCC = 1.65 V VCC = 2.3 V IOL Low-level output current Δt/ΔV TA Notes: Input transition rise or fall rate VCC = 3 V VCC = 4.5 V VCC = 1.8 V ± 0.15V, 2.5 V ± 0.2 V VCC = 3.3 V ± 0.3 V VCC = 5 V ± 0.5 V Operating free-air temperature -40 Max 5.5 Unit V V V 0.35 X VCC 0.7 0.8 0.3 X VCC 5.5 VCC -4 -8 -16 -24 -32 4 8 16 24 32 20 10 5 125 V V V mA mA ns/V ºC 3. Unused inputs should be held at Vcc or Ground. 74LVC1G10 Document number: DS35121 Rev. 1 - 2 3 of 14 www.diodes.com December 2010 © Diodes Incorporated 74LVC1G10 SINGLE 3 INPUT POSITIVE NAND GATE Electrical Characteristics Symbol Parameter TA=-40 °C to 85 °C Test Conditions IOH = -100μA VOH High Level Output Voltage (All typical values are at Vcc = 3.3V, TA = 25°C) Vcc Min 1.65V to 5.5V VCC – 0.1 IOH = -4mA 1.65V 1.2 IOH = -8mA 2.3V 1.9 IOH = -16mA 3V NEW PRODUCT IOH = -24mA VOL High-level Input Voltage 1.65V to 5.5V 0.1 IOL = 4mA 1.65V 0.45 IOL = 8mA 2.3V 0.3 3V Input Current VI = 5.5 V or GND IOFF Power Down Leakage Current VI or VO = 5.5V ICC Supply Current VI = 5.5V of GND IO=0 Additional Supply Current Input at VCC –0.6 V 74LVC1G10 Document number: DS35121 Rev. 1 - 2 2.3 IOL = 100μA IOL = 16mA Unit V 2.4 4.5V IOL = 32mA ΔICC Max IOH = -32mA IOL = 24mA II Typ. 3.8 0.4 V 0.55 4.5V 0.55 0 to 5.5V ±5 μA 0 ± 10 μA 1.65V to 5.5V 10 μA 3 V to 5.5V 500 μA 4 of 14 www.diodes.com December 2010 © Diodes Incorporated 74LVC1G10 SINGLE 3 INPUT POSITIVE NAND GATE Electrical Characteristics Symbol NEW PRODUCT VOH VOL II IOFF ICC ΔICC Ci θJA θJC Notes: Parameter TA=-40 °C to 125 °C (All typical values are at Vcc = 3.3V, TA = 25°C) Test Conditions IOH = -100μA IOH = -4mA IOH = -8mA High Level Output Voltage IOH = -16mA IOH = -24mA IOH = -32mA IOL = 100μA IOL = 4mA IOL = 8mA High-level Input Voltage IOL = 16mA IOL = 24mA IOL = 32mA Input Current VI = 5.5 V or GND VI or VO = 5.5V Power Down Leakage Current VI = 5.5V of GND Supply Current IO=0 Additional Supply Input at VCC –0.6 V Current Input Capacitance Vi = VCC – or GND SOT26 Thermal Resistance SOT363 Junction-to-Ambient DFN1010 SOT26 Thermal Resistance SOT363 Junction-to-Case DFN1010 Vcc Min 1.65V to 5.5V 1.65V 2.3V VCC – 0.1 0.95 1.7 1.9 2.0 3.4 3V 4.5V 1.65V to 5.5V 1.65V 2.3V Typ. Max Unit V 4.5V 0 to 5.5V 0.1 0.70 0.45 0.60 0.80 0.80 ± 20 μA 0 ± 20 μA 1.65V to 5.5V 40 μA 3 V to 5.5V 5000 μA 3V 3.3 (Note 4) (Note 4) 4 166 333 231 46 102 TBD V pF o C/W o C/W 4. Test condition for SOT26, SOT363 and DFN1010 : Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout. 74LVC1G10 Document number: DS35121 Rev. 1 - 2 5 of 14 www.diodes.com December 2010 © Diodes Incorporated 74LVC1G10 SINGLE 3 INPUT POSITIVE NAND GATE Switching Characteristics TA=-40 °C to 85 °C , CL = 15pF (see Figure 1) Parameter tpd From (Input) TO (OUTPUT) Any Y Vcc = 1.8 V ± 0.15V Vcc = 2.5 V ± 0.2V Vcc = 3.3 V ± 0.3V Vcc = 5 V ± 0.5V Min Max Min Max Min Max Min Max 1.0 14.8 0.7 5.5 0.7 3.8 0.7 2.7 Unit ns NEW PRODUCT TA=-40 °C to 85 °C , CL = 30 or 50pF (see Figure 2) Parameter tpd From (Input) TO (OUTPUT) Any Y Vcc = 1.8 V ± 0.15V Vcc = 2.5 V ± 0.2V Vcc = 3.3 V ± 0.3V Vcc = 5 V ± 0.5V Min Max Min Max Min Max Min Max 1.0 18.0 0.7 6.5 0.7 5 0.7 3.6 Unit ns TA=-40 °C to 125 °C , CL = 15 pF (see Figure 1) Parameter From (Input) TO (OUTPUT) tpd Any Y Vcc = 1.8 V ± 0.15V Min Max 1.0 17.7 Vcc = 2.5 V ± 0.2V Min Max 0.7 6.6 Vcc = 3.3 V ± 0.3V Min Max 0.7 4.6 Vcc = 5 V ± 0.5V Min Max 0.7 3.3 Vcc = 2.5 V ± 0.2V Min Max 0.7 7.8 Vcc = 3.3 V ± 0.3V Min Max 0.7 6.0 Vcc = 5 V ± 0.5V Min Max 0.7 4.3 Unit ns TA=-40 °C to 125 °C , CL = 30 or 50pF (see Figure 2) Parameter From (Input) TO (OUTPUT) tpd Any Y Vcc = 1.8 V ± 0.15V Min Max 1.0 21.6 Unit ns Operating Characteristics TA = 25 ºC Parameter Cpd Power dissipation capacitance 74LVC1G10 Document number: DS35121 Rev. 1 - 2 Test Conditions Vcc = 1.8 V Vcc = 2.5 V Vcc = 3.3 V Vcc = 5 V TYP TYP TYP TYP f = 10 MHz 17 18 19 22 6 of 14 www.diodes.com Unit pF December 2010 © Diodes Incorporated 74LVC1G10 SINGLE 3 INPUT POSITIVE NAND GATE NEW PRODUCT Parameter Measurement Information Inputs Vcc 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V 5V±0.5V VI tr/tf VCC VCC 3V VCC ≤2ns ≤2ns ≤2.5ns ≤2.5ns VM CL RL VCC/2 VCC/2 1.5V VCC/2 15pF 15pF 15pF 15pF 1MΩ 1MΩ 1MΩ 1MΩ Voltage Waveform Pulse Duration Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Notes: A. B. C. D. Includes test lead and test apparatus capacitance. All pulses are supplied at pulse repetition rate ≤ 10 MHz Inputs are measured separately one transition per measurement tPLH and tPHL are the same as tPD Figure 1. Load Circuit and Voltage Waveforms 74LVC1G10 Document number: DS35121 Rev. 1 - 2 7 of 14 www.diodes.com December 2010 © Diodes Incorporated 74LVC1G10 SINGLE 3 INPUT POSITIVE NAND GATE NEW PRODUCT Parameter Measurement Information (Continued) Inputs Vcc 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V 5V±0.5V VI VCC VCC 3V VCC tr/tf ≤2ns ≤2ns ≤2.5ns ≤2.5ns VM CL RL VCC/2 VCC/2 1.5V VCC/2 30pF 30pF 50pF 50pF 1KΩ 500Ω 500Ω 500Ω Voltage Waveform Pulse Duration Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Notes: A . Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate ≤ 10 MHz C. Inputs are measured separately one transition per measurement D. tPLH and tPHL are the same as tPD Figure 2. Load Circuit and Voltage Waveforms 74LVC1G10 Document number: DS35121 Rev. 1 - 2 8 of 14 www.diodes.com December 2010 © Diodes Incorporated 74LVC1G10 SINGLE 3 INPUT POSITIVE NAND GATE Ordering Information 74LVC1G 10 XXX - 7 Function NEW PRODUCT Logic Device 74 : Logic Prefix LVC : 1.65 to 5.5V Family 1G : One gate Package 10 : 3-Input NAND-Gate Packing W6 : SOT26 DW : SOT363 FW4 : DFN1010 7 : Tape & Reel 7” Tape and Reel Package Code Packaging (Note 7) Quantity Part Number Suffix 74LVC1G10W6-7 W6 SOT26 3000/Tape & Reel -7 74LVC1G10DW-7 DW SOT363 3000/Tape & Reel -7 74LVC1G10FW4-7 FW4 DFN1010 5000/Tape & Reel -7 Device Notes: 7. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 74LVC1G10 Document number: DS35121 Rev. 1 - 2 9 of 14 www.diodes.com December 2010 © Diodes Incorporated 74LVC1G10 SINGLE 3 INPUT POSITIVE NAND GATE Marking Information NEW PRODUCT (1) SOT26, SOT363 Part Number Package Identification Code 74LVC1G10W6 74LVC1G10DW SOT26 SOT363 TU TU Part Number 74LVC1G10FW4 Package DFN1010 Identification Code TU (2) DFN1010 74LVC1G10 Document number: DS35121 Rev. 1 - 2 10 of 14 www.diodes.com December 2010 © Diodes Incorporated 74LVC1G10 SINGLE 3 INPUT POSITIVE NAND GATE Package Outline Dimensions (All Dimensions in mm) NEW PRODUCT (1) Package Type: SOT26 (2) Package Type: SOT363 C L 0.10/0.30 CL 1.9 C L 1.15/1.35 6x-0.42 C L 6x-0.60 2.0/2.2 4x-0.65 PIN 1 0.40/0.45 0.65Bsc. Land Pattern Recommendation (unit:mm) 1.8/2.2 0.1/0.22 0.9/1.0 0/0.1 1.10Max. CL "A" Detail"A" 74LVC1G10 Document number: DS35121 Rev. 1 - 2 0°/8 0.25/0.40 ° 0.25 Gauge Plane 11 of 14 www.diodes.com December 2010 © Diodes Incorporated 74LVC1G10 SINGLE 3 INPUT POSITIVE NAND GATE Package Outline Dimensions (All Dimensions in mm) Seating Plane Side View 0.08 C C 0.08 C Pin1 0.35Typ. 74LVC1G10 Document number: DS35121 Rev. 1 - 2 0.14/0.20(6x) 0.15Min. A 0.35Typ. Pin1 0.15 0.95/1.05 0.15Min. 0.07Typ. 0.35/0.45(6x) 2x- 0.20(6x) 0.235 0.95/1.05 B 0.05/0.15 2X- NEW PRODUCT 0/0.05 0.08 C 0.45(6x) 0.40Max. 0.05 C 6x- 0.13Typ. (3) Package Type: DFN1010 Land Pattern Recommendation (unit:mm) Top View 0.07 C A B Bottom View 12 of 14 www.diodes.com December 2010 © Diodes Incorporated 74LVC1G10 SINGLE 3 INPUT POSITIVE NAND GATE Taping Orientation (Note 8) NEW PRODUCT For DFN1010 Notes: 8. The taping orientation of the other package type can be found on our website at http://www.diodes.com/datasheets/ap02007.pdf 74LVC1G10 Document number: DS35121 Rev. 1 - 2 13 of 14 www.diodes.com December 2010 © Diodes Incorporated 74LVC1G10 SINGLE 3 INPUT POSITIVE NAND GATE IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). NEW PRODUCT Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com 74LVC1G10 Document number: DS35121 Rev. 1 - 2 14 of 14 www.diodes.com December 2010 © Diodes Incorporated