74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Description Pin Assignments The 74LVC1G11 is a single 3-input positive AND gate with a standard push-pull output. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified NEW PRODUCT for partial power down applications using IOFF. The IOFF circuitry disables the output preventing damaging current backflow when the device is powered down. The gate performs the positive Boolean function: Y = A •B•C or Y = A +B+C Features Applications • Wide Supply Voltage Range from 1.65V to 5.5V • Voltage Level Shifting • ± 24mA Output Drive at 3.3V • General Purpose Logic • CMOS low power consumption • Power Down Signal Isolation • IOFF Supports Partial-Power-Down Mode Operation • Wide array of products such as: • Inputs accept up to 5.5V o PCs, networking, notebooks, netbooks, PDAs • ESD Protection Exceeds JESD 22 o Computer peripherals, hard drives, CD/DVD ROM o 200-V Machine Model (A115-A) o TV, DVD, DVR, set top box o 2000-V Human Body Model (A114-A) o Cell Phones, Personal Navigation / GPS o MP3 players ,Cameras, Video Recorders • Latch-Up Exceeds 100mA per JESD 78, Class II • Range of Package Options • SOT26, SOT363, DFN140, and DFN1010: Available in “Green” Molding Compound (no Br, Sb) • Lead Free Finish/ RoHS Compliant (Note 1) Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. 74LVC1G11 Document number: DS35122 Rev. 3 - 2 1 of 13 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Pin Descriptions Pin Name Description A GND B Y Data Input Ground Data Input Data Output VCC Supply Voltage Data Input NEW PRODUCT C Logic Diagram 1 A 4 3 B C Y 6 Function Table Inputs B A H L X X H X L X C Output Y H X X L H L L L Absolute Maximum Ratings (Note 2) Symbol Rating Unit 2 200 KV V Supply Voltage Range -0.5 to 6.5 V VI Input Voltage Range -0.5 to 6.5 V VO Voltage applied to output in high impedance or IOFF state VO Voltage applied to output in high or low state ESD HBM ESD MM VCC Human Body Model ESD Protection Machine Model ESD Protection -0.5 to 6.5 V -0.3 to VCC +0.5 V IIK Input Clamp Current VI<0 -50 mA IOK Output Clamp Current -50 mA IO Continuous output current ±50 mA Continuous current through Vdd or GND ±100 mA Operating Junction Temperature -40 to 150 °C Storage Temperature -65 to 150 °C TJ TSTG Notes: Description 2. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. 74LVC1G11 Document number: DS35122 Rev. 3 - 2 2 of 13 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Recommended Operating Conditions (Note 3) Symbol VCC Operating Voltage Parameter Min Max Unit Operating Data retention only 1.65 1.5 5.5 V V VCC = 1.65V to 1.95V NEW PRODUCT VIH High-level Input Voltage VCC = 2.3V to 2.7V VCC = 3V to 3.6V VCC = 4.5V to 5.5V 0.65 X VCC 1.7 0.7 X VCC VCC = 1.65V to 1.95V VIL Low-level input voltage VI Input Voltage VO Output Voltage 0.35 X VCC VCC = 2.3V to 2.7V 0.7 VCC = 3V to 3.6V 0.8 VCC = 4.5V to 5.5V IOH IOL Δt/ΔV TA Notes: High-level output current Low-level output current Input transition rise or fall rate V 2 V 0.3 X VCC 0 5.5 V 0 VCC V VCC = 1.65V -4 VCC = 2.3V -8 -16 VCC = 3V mA -24 VCC = 4.5V -32 VCC = 1.65V 4 VCC = 2.3V 8 16 VCC = 3V mA 24 VCC = 4.5V 32 VCC = 1.8V ± 0.15V, 2.5V ± 0.2V 20 VCC = 3.3V ± 0.3V 10 VCC = 5V ± 0.5V 5 Operating free-air temperature -40 125 ns/V ºC 3. Unused inputs should be held at VCC or Ground. 74LVC1G11 Document number: DS35122 Rev. 3 - 2 3 of 13 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Electrical Characteristics TA = -40°C to 85°C (All typical values are at VCC = 3.3V, TA = 25°C) Symbol Parameter Test Conditions IOH = -100μA VOH High Level Output Voltage NEW PRODUCT High-level Input Voltage 1.65V to 5.5V VCC – 0.1 1.65V 1.2 IOH = -8mA 2.3V 1.9 IOH = -16mA 3V 0.1 IOL = 4mA 1.65V 0.45 IOL = 8mA 2.3V 0.3 3V IOL = 32mA 3.8 0.4 V 0.55 4.5V 0.55 0 to 5.5V ±5 μA 0 ± 10 μA VI = 5.5V of GND IO=0 1.65V to 5.5V 10 μA Input at VCC –0.6V 3V to 5.5V 500 μA IOFF Power Down Leakage Current VI or VO = 5.5V ICC Supply Current Additional Supply Current Document number: DS35122 Rev. 3 - 2 2.3 4.5V IOL = 16mA Unit V 2.4 1.65V to 5.5V VI = 5.5 V or GND 74LVC1G11 Max IOL = 100μA Input Current ΔICC Typ. IOH = -32mA IOL = 24mA II Min IOH = -4mA IOH = -24mA VOL VCC 4 of 13 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Electrical Characteristics Symbol Parameter TA = -40°C to 125°C Test Conditions IOH = -100μA High Level Output Voltage VOH (All typical values are at VCC = 3.3V, TA = 25°C) NEW PRODUCT High-level Input Voltage 1.65V to 5.5V VCC – 0.1 1.65V 0.95 IOH = -8mA 2.3V 1.7 IOH = -16mA 3V Max V 2.0 4.5V 1.65V to 5.5V 0.1 IOL = 4mA 1.65V 0.70 IOL = 8mA 2.3V 0.45 IOL = 16mA 3.4 IOL = 32mA IOFF Power Down Leakage Current VI or VO = 5.5V ICC Supply Current VI = 5.5V of GND IO=0 Additional Supply Current Input at VCC –0.6 V V 0.60 3V VI = 5.5 V or GND Unit 1.9 IOL = 100μA Input Current ΔICC Typ. IOH = -32mA IOL = 24mA II Min IOH = -4mA IOH = -24mA VOL VCC 0.80 4.5V 0.80 0 to 5.5V ± 20 μA 0 ± 20 μA 1.65V to 5.5V 40 μA 3V to 5.5V 5000 μA Max Unit Package Characteristics (All typical values are at Vcc = 3.3V, TA = 25°C) Symbol CI θJA θJC Parameter Test Conditions Input Capacitance VI = VCC – or GND Thermal Resistance Junction-to-Ambient SOT26 SOT363 DFN1410 Thermal Resistance Junction-to-Case VCC 3.3 (Note 4) Typ. 3.5 204 371 430 DFN1010 510 SOT26 SOT363 52 143 DFN1410 (Note 4) 190 pF o C/W o C/W 250 DFN1010 Notes: Min 4. Test condition for SOT26, SOT363, DFN1410 and DFN1010 : Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout. 74LVC1G11 Document number: DS35122 Rev. 3 - 2 5 of 13 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Switching Characteristics TA=-40 °C to 85 °C, CL = 15pF (see Figure 1) Parameter NEW PRODUCT tpd From (Input) TO (OUTPUT) Any Y VCC = 1.8V ± 0.15V VCC = 2.5V ± 0.2V VCC = 3.3V ± 0.3V VCC = 5V ± 0.5V Unit Min Max Min Max Min Max Min Max 1.0 15.2 0.7 5.6 0.7 4.1 0.7 3.1 ns TA=-40 °C to 85 °C, CL = 30 or 50pF (see Figure 2) Parameter tpd From (Input) TO (OUTPUT) Any Y VCC = 1.8V ± 0.15V VCC = 2.5V ± 0.2V VCC = 3.3V ± 0.3V VCC = 5V ± 0.5V Min Max Min Max Min Max Min Max 1.0 17.2 0.7 6.2 0.7 4.9 0.7 3.5 Unit ns TA=-40 °C to 125 °C, CL = 15 pF (see Figure 1) Parameter tpd From (Input) TO (OUTPUT) Any Y VCC = 1.8V ± 0.15V VCC = 2.5V ± 0.2V VCC = 3.3V ± 0.3V VCC = 5V ± 0.5V Min Max Min Max Min Max Min Max 1.0 18.3 0.7 6.7 0.7 4.9 0.7 3.7 Unit ns TA=-40 °C to 125 °C, CL = 30 or 50pF (see Figure 2) Parameter From (Input) TO (OUTPUT) tpd Any Y VCC = 1.8V ± 0.15V Min Max VCC = 2.5V ± 0.2V Min Max VCC = 3.3V ± 0.3V Min Max VCC = 5V ± 0.5V Min Max 1.0 0.7 0.7 0.7 20.7 7.5 5.9 4.2 Unit ns Operating Characteristics TA = 25 ºC Parameter Cpd Power dissipation capacitance 74LVC1G11 Document number: DS35122 Rev. 3 - 2 Test Conditions VCC = 1.8V VCC = 2.5V VCC = 3.3V VCC = 5V Typ. Typ. Typ. Typ. f = 10 MHz 17 18 19 22 6 of 13 www.diodes.com Unit pF July 2011 © Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE NEW PRODUCT Parameter Measurement Information Inputs VCC VM CL RL ≤2ns VCC/2 15pF 1MΩ ≤2ns VCC/2 15pF 1MΩ ≤2.5ns ≤2.5ns 1.5V VCC/2 15pF 15pF 1MΩ 1MΩ VI tr/tf 1.8V±0.15V VCC 2.5V±0.2V VCC 3.3V±0.3V 5V±0.5V 3V VCC Voltage Waveform Pulse Duration Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Notes: A. B. C. D. Includes test lead and test apparatus capacitance. All pulses are supplied at pulse repetition rate ≤ 10 MHz Inputs are measured separately one transition per measurement tPLH and tPHL are the same as tPD Figure 1. Load Circuit and Voltage Waveforms 74LVC1G11 Document number: DS35122 Rev. 3 - 2 7 of 13 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE NEW PRODUCT Parameter Measurement Information (Continued) Inputs VCC VM CL RL ≤2ns VCC/2 30pF 1KΩ VCC ≤2ns VCC/2 30pF 500Ω 3V ≤2.5ns ≤2.5ns 1.5V 50pF 50pF 500Ω 500Ω VI tr/tf 1.8V±0.15V VCC 2.5V±0.2V 3.3V±0.3V 5V±0.5V VCC VCC/2 Voltage Waveform Pulse Duration Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Notes: A. B. C. D. Includes test lead and test apparatus capacitance. All pulses are supplied at pulse repetition rate ≤ 10 MHz Inputs are measured separately one transition per measurement tPLH and tPHL are the same as tPD Figure 2. Load Circuit and Voltage Waveforms 74LVC1G11 Document number: DS35122 Rev. 3 - 2 8 of 13 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE NEW PRODUCT Ordering Information Device Package Code Packaging (Note 7) 74LVC1G11W6-7 74LVC1G11DW-7 74LVC1G11FW4-7 74LVC1G11FZ4-7 W6 DW FW4 FW4 SOT26 SOT363 DFN1010 DFN1410 Notes: 7” Tape and Reel Quantity Part Number Suffix 3000/Tape & Reel 3000/Tape & Reel 5000/Tape & Reel 5000/Tape & Reel -7 -7 -7 -7 5. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 6. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf 74LVC1G11 Document number: DS35122 Rev. 3 - 2 9 of 13 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Marking Information NEW PRODUCT (1) SOT26, SOT363 Part Number Package Identification Code 74LVC1G11W6 74LVC1G11DW SOT26 SOT363 TV TV Part Number Package Identification Code 74LVC1G11FW4 74LVC1G11FZ4 DFN1010 DFN1410 TV TV (2) DFN1010,DFN1410 74LVC1G11 Document number: DS35122 Rev. 3 - 2 10 of 13 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Package Outline Dimensions (All Dimensions in mm) NEW PRODUCT (1) Package Type: SOT26 (2) Package Type: SOT363 C L 0.10/0.30 C L 1.9 C L 1.15/1.35 6x-0.42 C L 6x-0.60 2.0/2.2 4x-0.65 PIN 1 0.40/0.45 0.65Bsc. Land Pattern Recommendation (unit:mm) 1.8/2.2 0.1/0.22 0.9/1.0 0/0.1 1.10Max. C L "A" Detail"A" 74LVC1G11 Document number: DS35122 Rev. 3 - 2 0°/8 0.25/0.40 ° 0.25 Gauge Plane 11 of 13 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE 0.40Max. 0.08 C 0.235 0.95/1.05 A 0.35Typ. Pin1 Pin1 0.35Typ. 0.14/0.20(6x) 0.07Typ. 0.35/0.45(6x) 0.08 C 0.15Min. 0.95/1.05 2x- 0.20(6x) 0.15Min. 0.05/0.15 2X- NEW PRODUCT B C 0.45(6x) Seating Plane Side View 0/0.05 0.08 C 0.15 0.05 C 6x- 0.13Typ. (3) Package Type: DFN1010 Land Pattern Recommendation (unit:mm) Top View C A B 0.07 Bottom View C Side View 1.35/1.45 0.550 2X- 6x-0.25 6x-0.35 Seating Plane 0.25 A 0.08 C 0.13Typ. 0.40Max. 0.10 C 6x- 0/0.05 (4) Package Type DFN1410 A 0.50Typ. 2X- (Pin #1 ID) X 45¢ . 1x C0 0.075¡ 0Ó.030 6x-0.25/0.35 0.95/1.05 B 4x-0.50Typ. Land Pattern Recommendation (mm) Top View 0.25 B 0.10(4x) 6x-0.15/0.25 0.10 C A B Bottom View 74LVC1G11 Document number: DS35122 Rev. 3 - 2 12 of 13 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). NEW PRODUCT Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2011, Diodes Incorporated www.diodes.com 74LVC1G11 Document number: DS35122 Rev. 3 - 2 13 of 13 www.diodes.com July 2011 © Diodes Incorporated