Surface Mount Series 752 (Ohms) EIA Code 10 12 15 18 22 27 33 39 47 51 56 68 82 100 110 120 150 180 200 220 270 330 390 470 510 560 680 820 1000 1100 1200 1500 1800 2000 2200 2700 Bussed DRT Schematic 1 N N-1 N/2 + 1 1 2 N/2 Single Row Termination (SRT) PAD #1 MARK 2.03 ±0.12 0.080 ±0.005 2.41 ±0.12 0.095 ±0.005 PART NO. CTS DATE Bussed SRT Schematic 1 In-Line Surface Mount Resistor Products • High density packaging • Low profile • Input/outputs available: Dual Row Terminations - 16, 18, 20, 24 Single Row Terminations - 8, 9, 10, 12 • Nickel barrier solder-coated pads • Designed for visual inspection of solder joints • Designed for board cleaning • 24mm tape & reel packaging • Application specific circuits are available • Compatible with all solder processes Wave, IR reflow, Vapor phase reflow SEATING PLANE "A" 0.05 ±0.05 0.002 ±0.002 Input/Outputs ”A” Dim. 1.52 Ref 0.060 0.64 ±0.12 0.025 ±0.005 1.27 TYP. 0.050 Resistance Range: Standard: 10Ω to 1 MegΩ Resistance Tolerance: Standard: ±2% or 0.5Ω (whichever is greater) Special: ±1% or 0.3Ω (whichever is greater) 1 Dimensions are mm/in. Isolated DRT Schematic 3 SRT mm in. 8 9 10 12 11.81 ±0.12 13.08 ±0.12 14.35 ±0.12 16.89 ±0.12 0.465 ±0.005 0.515 ±0.005 0.565 ±0.005 0.665 ±0.005 N 1 DRT mm in. 16 18 20 24 11.81 ±0.12 13.08 ±0.12 14.35 ±0.12 16.89 ±0.12 0.465 ±0.005 0.515 ±0.005 0.565 ±0.005 0.665 ±0.005 N N-1 N/2 + 1 Not Available in 18 Pad 2 N/2 Isolated SRT Schematic 3 Not Available in 9 Pad Dual Row Termination (DRT) 1 PAD #1 MARK Maximum Operating Voltage: 25V not to exceed rated power 2.03 ±0.12 0.080 ±0.005 2.41 ±0.12 0.095 ±0.005 N Dual Terminator SRT Schematic 5 PART NO. CTS DATE Temperature Coefficient: Standard: ±200PPM/°C Special: ±100PPM/°C (33Ω to 1 MegΩ) R2 0.05 0.002 Dielectric Strength: 100 VAC ±0.05 The TCE of the mounting surface will affect the long term reliability of the solder joint between the Series 752 and the mounting surface. Application requirements vary and each user must determine whether the Series 752 is appropriate for the application. Thermal shock data for solder joint fatigue is available on request. Application Notes pages 24-25 Power Derating page 33 Land Patterns pages 34-35 Packaging pages 36-37 Environmental Performance Specifications pages 38-39 N How to Order Series 752 Products 752 Not Available in DRT Values and CTS Code listed on page 32 ■ ■ ■ 16 ■ ■ 3 Series 752 Schematic 101 Resistor Code See Page 32 Schematic 5 Input/Outputs SRT DRT 08 16 09 18 10 20 12 24 NOTE: No dashes or spaces to appear in part number. CTS Resistor/Electrocomponents 406 Parr Road Berne, IN 46711 fax: (219) 589-3243 www.ctscorp.com 752B 16 R1 1 Application specific custom products are marked with either a customer part number or a non-descriptive CTS part number. Send documentation to a CTS Sales Office giving schematic, resistor values and tolerance, and other non-standard information. See pages 24-25 for application notes. 1.27 TYP. 0.050 ■ R1 ±0.002 0.64 ±0.12 0.025±0.005 Power Rating (Total Network Power): Number of input/outputs (watts) SRT 8 9 10 12 DRT 16 18 20 24 @25°C 1.2 1.3 1.4 1.7 1.4 1.5 1.6 2.0 @70°C 0.8 0.85 0.9 1.1 0.9 0.95 1.0 1.3 Maximum Resistor Power: (Not to Exceed Total Network Power) Bussed & Dual Isolated Terminator Schematic Schematic @25°C 0.12w 0.24w @70°C 0.08w 0.16w R2 3300 3900 4700 5100 5600 6800 8200 10000 11000 12000 15000 18000 20000 22000 27000 33000 39000 47000 56000 68000 82000 100000 110000 120000 150000 180000 200000 220000 270000 330000 390000 470000 560000 680000 820000 1000000 1.52 Ref 0.060 PAD #1 Operating Temperature Range: -55°C to +125°C R1 SEATING PLANE "A" R2 100 120 150 180 220 270 330 390 470 510 560 680 820 101 111 121 151 181 201 221 271 331 391 471 511 561 681 821 102 112 122 152 182 202 222 272 (Ohms) EIA Code 1 Bussed 3 Isolated 5 Dual Terminator Example: 752163101GTR G Packaging - TR - Tape & Reel B - Bulk (see page 36) Tolerance Schematic 1&3 J= ±5% G= ±2% F= ±1% D= ±1/2% Schematic 5 All 5 schematic products are 2% tolerance. (not marked) See page 33 for part marking information. CTS Resistor/Electrocomponents 406 Parr Road Berne, IN 46711 fax: (219) 589-3243 www.ctscorp.com 752B ■ ■ ■ ■ ■ 17 TR ■ 332 392 472 512 562 682 822 103 113 123 153 183 203 223 273 333 393 473 563 683 823 104 114 124 154 184 204 224 274 334 394 474 564 684 824 105 G T L & E C L Te rm i n a t o rs - S e ri e s 7 5 2 & 7 5 3 See pages 16-19 for physical dimensions, power rating and other 752 & 753 information. Spice Equivalent Circuit GTL Termination 24 13 1 R18 High Speed Digital Termination Networks • Low inductance leadless construction • Excellent high frequency response • Very low crosstalk • High power dissipation versus board space • Spice models available for circuit simulation • Solder-coated nickel barrier pads • Tape & reel packaging per EIA 481 • Designed to work with standard automated surface mount pick & place solder processes R17 R16 R15 R14 R13 R12 2 3 4 R11 R10 R = Terminator Resistance Value/2 R1 R2 R3 R4 R5 R6 R7 R8 R9 0.5nH R 12 1 0.5nH 0.08pF R 0.5nH 0.6nH R 0.08pF 0.08pF 0.1pF 0.1pF ECL Termination Resistance Tolerance: Standard ±2% or 0.5Ω (whichever is greater) Special: ±1% R 0.1pF R R R1 0.2nH Temperature Coefficient (TCR): Standard: ±200PPM/°C 1 0.2nH 0.6nH 0.2nH 12 1 2 3 4 Apply 250mV Operating Temperature Range: -55°C to +125°C Spice Result 1nS Measured Result 1nS Spice Result 28pS Measured Result 28pS Apply P1 View P2 View P4 4.4mV 3.1mV 4.5mV 3.0mV 48mV 28mV 34mV 22mV Apply P2 View P1 View P4 4.4mV 3.0mV 5.0mV 2.4mV 55mV 30mV 34mV 16mV Apply P4 View P1 View P4 3.1mV 3.0mV 3.0mV 2.6mV 30mV 30mV 22mV 16mV R2 Testing based on TDR pulse using a Tektronix 11802 digitizing scope. 28ps pulse applied, 1ns filter applied on 1ns measurement. Terminator value tested = 50Ω. ECL Standard Resistance Values GTL Standard Resistance Values R1 81Ω 120Ω 162Ω 220Ω 180Ω 220Ω 330Ω 330Ω Value Code Value Code 39Ω 390 100Ω 101 47Ω 470 110Ω 111 50Ω 500 120Ω 121 51Ω 510 150Ω 151 56Ω 560 180Ω 181 62Ω 620 220Ω 221 68Ω 680 270Ω 271 75Ω 750 330Ω 331 82Ω 820 See page 19 for available value codes R2 130Ω 200Ω 260Ω 270Ω 390Ω 330Ω 390Ω 470Ω Thev 50Ω 75Ω 100Ω 121Ω 123Ω 130Ω 180Ω 190Ω Code 500A 750B 101B 121B 121A 131A 181A 191A 753 How to Order Series GTL & ECL Products 24 Series 752 Series 753 See page 32 for available value & CTS codes G 101 G Resistor Code 3 digit EIA # Pads 24 (GTL) 12 (ECL) Packaging TR - Tape & Reel B - Bulk (see page 36) Standard Product Offering Termination Type GTL (parallel) ECL (Thevenin) CTS Series# Rated Package Power @25°C Resistor Power @25°C Term. Pitch 753 0.82W 0.06W 0.025” 752 2.0W 0.08W 0.050” 753 0.82W 0.06W 0.025” 752 2.0W 0.08W 0.050” Term. Lines Termination G=GTL E=ECL 18 ■ 20 ■ ■ ■ Tolerance J = ±5% G = ±2% (standard) F = ±1% or .5Ω 8 NOTE: No dashes or spaces to appear in part number. CTS Resistor/Electrocomponents 406 Parr Road Berne, IN 46711 fax: (219) 589-3243 www.ctscorp.com 75XB ■ TR ■ Example: 75324G101GTR See page 33 for part marking information. CTS Resistor/Electrocomponents 406 Parr Road Berne, IN 46711 fax: (219) 589-3243 www.ctscorp.com 75XB ■ ■ ■ ■ ■ 21 ■ D u a l Te rm i n a t o r Standard CTS Dual Terminator products contain (2N-2) resistors of two different values with each resistor value connected to a common buss. CTS assigns the resistance value portion of the standard part numbers of the dual terminator network in two different methods. N R1 R2 Ohms 25 50 30 50 30 620 33 4.7K 36 620 43 620 68 189 75 620 80 220 81 130 81 2.2K 100 200 100 430 100 150 106 169 110 220 118 178 120 200 120 180 120 120 150 150 160 260 160 240 160 270 162 260 180 300 180 470 180 390 180 270 180 220 200 1.5K 220 330 220 270 220 220 240 170 240 620 250 250 270 470 N/2 +1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 1 N/2 The Series 770 part number includes the actual values of the resistors in the dual terminator. For example: 770105180/470 Power Derating Curve for Resistor Networks Dual Terminator Resistor Values & Codes R1=180Ω R2=470Ω The Series 752, 766, 767 and 768 part number includes the EIA Code value of the Thevenin equivalent resistances of R1 and R2. The Thevenin equivalent resistance is calculated in the following way: the suffix letter relates only to the sequence of variations which equal the same equivalent resistance. Reference chart. Req = R1R2 (R1 + R2) Examples: 766165131A R1=220Ω R2=330Ω Req=132Ω 767145191A R1=330Ω R2=470Ω Req=194Ω 768205131C R1=180Ω R2=470Ω Req=130Ω Pin N/2 is common to R2 and Pin #N is common to R1 on CTS Series 766, 767 and 768 . Pin #1 is common to R2 and Pin N is common to R1 on all CTS Series 752, 753 and 770 dual terminator schematics. Thevenin CTS Equivalent Code 15 ohm 19 ohm 29 ohm 33 ohm 34 ohm 40 ohm 50 ohm 67 ohm 59 ohm 50 ohm 78 ohm 67 ohm 81 ohm 60 ohm 65 ohm 73 ohm 71 ohm 75 ohm 72 ohm 60 ohm 75 ohm 99 ohm 96 ohm 100 ohm 100 ohm 113 ohm 130 ohm 123 ohm 108 ohm 99 ohm 176 ohm 132 ohm 121 ohm 110 ohm 100 ohm 173 ohm 125 ohm 171 ohm 150A 190A 290A 330A 340A 400A 500B 670A 590A 500A 780A 670B 810A 600A 650A 730A 710A 750B 720A 600B 750A 990A 960A 101D 101B 111B 131C 121A 111A 101A 171D 131A 121B 111D 101C 171C 131B 171A R1 R2 Ohms 270 271 330 330 330 330 330 360 360 390 470 470 470 500 560 560 680 750 750 1K 1K 1.1K 1.2K 1.5K 1.5K 2K 2.2K 2.2K 2.2K 3K 3K 3.3K 3.9K 4.7K 5K 6.8K 10K 50K 180 131 470 680 390 220 330 720 600 620 1K 680 940 500 910 1K 1K 750 2.3K 3.3K 2K 2.2K 1.2K 1.5K 3.3K 2K 5.6K 4.4K 3.3K 6.2K 2K 4.7K 3.3K 22K 5K 22K 51K 100K Thevenin CTS Equivalent Code 108 ohm 88 ohm 194 ohm 222 ohm 179 ohm 132 ohm 165 ohm 240 ohm 225 ohm 239 ohm 320 ohm 278 ohm 313 ohm 250 ohm 347 ohm 359 ohm 405 ohm 375 ohm 566 ohm 767 ohm 667 ohm 733 ohm 600 ohm 750 ohm 1031 ohm 1000 ohm 1579 ohm 1467 ohm 1320 ohm 2022 ohm 1200 ohm 1939 ohm 1788 ohm 3873 ohm 2500 ohm 5194 ohm 8361 ohm 33,333 ohm 111C 880A 191A 221A 181A 131D 171B 241B 231A 241A 321A 281A 311A 251A 351A 361A 401A 381A 571A 771A 671A 731A 601A 751A 102A 102B 162A 152A 132A 202A 122A 192A 182A 392A 252A 522A 842A 333A 1. All tolerances ±2%. 2. Other values available on request. 3. Suffix letter has no significance–assigned in sequential order. CTS Resistor/Electrocomponents 406 Parr Road Berne, IN 46711 fax: (219) 589-3243 www.ctscorp.com DTCB ■ ■ 32 ■ ■ ■ ■ 160% 140% 120% Percent Rated Power CTS Dual Terminator Schematics 100% 80% 60% 40% 20% 0% 0 10 20 30 40 50 70 60 80 90 100 120 110 Degrees Centigrade Part Marking The following chart indicates the characters marked on parts with standard marking. Part Series 742, 743, 744 745, 746 752 12 & 24 pad 10 & 20 pad 9 & 18 pad 8 & 16 pad 753 12 & 24 pad 10 & 20 pad 9 & 18 pad 8 & 16 pad 766, 767, 768 770 No. of Pins/Pads ✓ Schematic ✓ ✓ ✓ ✓ ✓ ✓ R Resistor Value or Code Tolerance Date Code YRWK ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ 3-digit 3-digit 3-digit 3-digit ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ 2-digit 2-digit CTS Resistor/Electrocomponents 406 Parr Road Berne, IN 46711 fax: (219) 589-3243 www.ctscorp.com PDC/PMC ■ ■ ■ ■ ■ 33 ■ 4-digit 4-digit Surface Mount Land Patterns Surface Mount Series 752 Surface Mount Series 753 Stencil Opening DRT Solder Paste Stencil Opening Concave and Convex Chip Resistor Arrays 742-746 K "B" Q A B C D 742 1.80 0.071 0.80 0.032 0.50 0.020 0.90 0.035 743 1.90 0.075 1.27 0.050 0.80 0.032 1.20 0.047 Stencil Opening 744 3.00 0.118 1.27 0.050 0.80 0.032 1.30 0.051 SRT Solder Paste Stencil Opening 745 3.00 0.118 1.27 0.050 0.80 0.032 1.30 0.051 746 1.52 0.060 0.64 0.025 0.35 0.014 0.80 0.032 "C" "D" In. A B C D E F 6 mil 752 0.051 0.064 1.40 0.30 0.020 0.025 0.055 0.012 Dimensions mm/inch Series S Dim. 4 mil 752 0.66 0.76 1.52 0.38 0.026 0.030 0.060 0.015 Concave/Convex "A" Sw Sw S Q 4 mil 752 2.40 0.76 0.38 NA 0.095 0.030 0.015 6 mil 752 1.90 0.63 0.33 NA 0.075 0.025 0.013 Land Patterns DRT Solder Paste Stencil Opening mm. 0.125 0.050 0.030 0.050 0.025 0.050 No. of Pads K Stencil Opening Land Patterns 3.18 1.27 0.76 1.27 0.64 1.27 K Sw S 0.350 0.400 0.450 0.550 8.89 10.16 11.43 13.97 16 18 20 24 0.350 0.400 0.450 0.550 8.89 10.16 11.43 13.97 In. mm. A B C D E F 0.120 0.025 0.017 0.050 0.020 0.035 3.05 0.64 0.43 1.27 0.51 0.89 Q 4 mil 753 0.51 0.30 1.32 0.15 0.020 0.012 0.052 0.006 6 mil 753 0.028 0.030 1.47 0.15 0.011 0.012 0.058 0.006 No. of Pads “H” Dim In. mm 8 9 10 12 Dim. Stencil Opening SRT Solder Paste Stencil Opening K Sw S Q 4 mil 753 2.75 0.30 0.15 NA 0.108 0.012 0.006 6 mil 753 1.72 0.30 0.15 NA 0.068 0.012 0.006 8 9 10 12 0.175 0.200 0.225 0.275 4.44 5.08 5.72 6.99 16 18 20 24 0.175 0.200 0.225 0.275 4.44 5.08 5.72 6.99 NOTE: ■ Land Patterns for Concave and Convex termination can be the same. Series 752 & 753 Land Patterns Surface Mount Series 766, 767 & 768 "C" "D" "B" Lead Count A B C D "A" 766-8P 3.60 0.140 5.60 0.220 7.60 0.300 3.81 0.150 766-14P 3.60 0.140 5.60 0.220 7.60 0.300 7.60 0.300 766-16P 3.60 0.140 5.60 0.220 7.60 0.300 8.90 0.350 767-14 5.34 0.210 7.37 0.290 9.40 0.370 7.60 0.300 767-16 5.34 0.210 7.37 0.290 9.40 0.370 8.90 0.350 0.63 TYP. 0.025 1.27 TYP. 0.050 2.03 TYP. 0.080 768-14 5.34 0.210 7.37 0.290 9.40 0.370 7.60 0.300 768-16 5.34 0.210 7.37 0.290 9.40 0.370 8.90 0.350 768-20 5.34 0.210 7.37 0.290 9.40 0.370 11.43 0.450 DUAL ROW TERMINATION Series 752 & 753 Stencil Openings "B" Solder Paste Stencil Opening "C" "D" "A" "K" "E" "S" "F" SINGLE ROW TERMINATION Sw Keep out zone for stand offs. Circuit board traces should be avoided in this area to allow the stand off to rest directly on the PCB. "B" Radius Q Sw "C" "K" "A" Radius Q "F" "H" CTS Resistor/Electrocomponents 406 Parr Road Berne, IN 46711 fax: (219) 589-3243 www.ctscorp.com SMLPB ■ ■ 34 ■ ■ ■ ■ CTS Resistor/Electrocomponents 406 Parr Road Berne, IN 46711 fax: (219) 589-3243 www.ctscorp.com SMLPB ■ ■ ■ ■ ■ 35 ■ “H” Dim In. mm Standard Packaging Series 752, 753, 766, 767, 768 Series 753 Tape & Reel 5000 STD 1000 min. 16mm 4mm 13" 2000 STD 1000 min. 16mm 8mm 13" Bulk Pack 250 parts/bag PART # Tape width Tape pitch Reel diameter TR2 PART # Parts/reel TR1 PART # Bar coding of reel and boxes available on request. CTS normally uses code configuration 39 in accordance with (AIM) USS 39 symbol specification. Outer container marketing per EIA-556. Resistivity <1 X105 ohm/sq. Antistatic .004 max. Molded plastic 30 To 130 gr. Antistatic PART # Bar Coding Available Carrier Tape: Cover Tape: Reels: Cover Tape Pull: Slide Pacs: PART # Tape & Reel Specifications per EIA-481-2 DIRECTION OF FEED Series 742,743,744,745, 746 Tape & Reel 742C043 Parts/Reel Pitch Carrier Width Material Reel diameter 5000 4mm 8mm paper 7" 742C083 742X083 5000 4mm 8mm paper 7" 742C163 743C043 4000 4mm 12mm plastic 7" 743C083 4000 4mm 8mm plastic 7" 744C043 4000 4mm 12mm plastic 7" Series 770 744C083 745C101 745X101 746X101 745C102 745X102 4000 4mm 8mm plastic 7" 4000 8mm 12mm plastic 7" 4000 4mm 12mm plastic 7" 4000 4mm 12mm plastic 7" Bulk Pack Slide Pack 5000 4mm 8mm paper 7" All Products 250 Parts/Bag Tube Length = 457mm/18 in # Pins Qty/Tube 4 50 5 40 6 32 7 28 8 24 9 22 10 19 11 18 12 16 Series 766/767/768 Series 752 8 Pin 14 Pin 16 Pin 14 Pin 16 Pin 20 Pin Package 766 766 766 767/768 767/768 768 12mm 8mm 13" 3,000 7" 800 16mm 8mm 13" 3,000 7" 800 16mm 8mm 13" 3,000 7" 800 24mm 12mm 13" 2,000 24mm 12mm 13" 2,000 24mm 12mm 13" 2,000 20" 99ii 20" 56ii 20" 49ii 20" 48ii 20" 43ii 20" 35ii Tape & Reel Bulk Pack 250 parts/bag PART NO. Tape width Tape pitch Reel diameter #parts/reel* Reel diameter #parts/reel* CTS DATE PART NO. CTS DATE PART NO. CTS DATE 2000 STD 1000 min. 24mm 12mm 13" PART NO. CTS DATE 5000 STD 1000 min. 24mm 4mm 13" PART NO. CTS DATE Tape width Tape pitch Reel diameter TR2 PART NO. CTS DATE Parts/reel TR1 PART NO. CTS DATE Tape & Reel Network Slide Packs DIRECTION OF FEED Tube length #parts/slide pac* DIRECTION OF FEED *nominal full reels or slide packs CTS Resistor/Electrocomponents 406 Parr Road Berne, IN 46711 fax: (219) 589-3243 www.ctscorp.com SPB ■ ■ 36 ■ ■ ■ ■ CTS Resistor/Electrocomponents 406 Parr Road Berne, IN 46711 fax: (219) 589-3243 www.ctscorp.com SPB ■ ■ ■ ■ ■ 37 ■ Environmental Performance Specifications Test Thermal Cycling Series 752, 753, 766, 770 Series 767, 768 Series 742, 743, 744, 745, 746 Short Time Overload Series 766, 770 Series 752, 753 Series 767, 768 Series 742, 745 Series 743 Series 744 Series 746 Max. ∆R Mil. Std. 202 Method Test Cond. 107 B 0.5% 0.25% 1.0% Load Humidity Series 752, 753, 766, 767, 768, 770 High Temp Exposure Series 752, 753, 766, 767, 768, 770 Series 742, 743, 744, 745, 746 Load Life Series 752, 753, 766, 767, 768 Series 770 Series 742, 743, 744, 745, 746 Resistance to Solder Heat Series 752, 753, 766, 767, 768 Series 770 Series 742, 743, 744, 745, 746 Resistance to Leach Series 742, 743, 744, 745, 746, 752, 753 Mechanical Shock Series 752, 753, 766, 767, 768, 770 Terminal Strength Series 766, 767, 768 Series 770 5 cycles, -65°C to +125°C 2 1/2 x rated voltage, 5 sec (100V Max.) 2 1/2 x rated voltage, 5 sec (50V Max.) 2 1/2 x rated voltage, 5 sec. (100V Max.) 2 1/2 x rated voltage, 5 sec (100V Max.) 2 1/2 x rated voltage, 5 sec. (200V Max.) 2 1/2 x rated voltage, 5 sec (400V Max.) 2 1/2 x rated voltage, 5 sec (50V Max.) 0.5% 106 240 hours, 0.1 rated load, -10°C to +65°C, 90% RH 2.0% 1.0% 1000 hours, 0.1 rated load, 70°C, 85-92% RH 1.0% 1.0% 240 hours, no load, @ 125°C 1000 hours, no load, @ 125°C 1.0% 108 F D 1.0% 0.25% 0.25% 1.0% A B N/A Max. ∆R Test 5 cycles, -55°C to +125°C 0.5% 0.5% 0.25% 2.0% 2.0% 2.0% 2.0% Moisture Resistance Series 752, 753, 766, 767, 768, 770 Series 742, 743, 744, 745, 746 Test Description Mil. Std. 202 Method Test Cond. Test Description 0.25% 0.9 Kg. pull, 30 sec., two 45° bends 2.0 Kg. pull, 30 sec., three 45° bends Low Temp Storage Series 752, 753, 766, 767 768, 770 0.25% 24 hours @ -65°C, no load Low Temp Operation Series 752, 753, 766, 767 768, 770 0.25% 45 min @ -65°C, full load Flammability (UL) Series 752, 753, 766, 767 768, 770 N/A 94V-0 Non-Fungus per MIL-STD 810C Series 752, 766, 767, 768, 770 Resistance to Solvents Series All Isopropyl alcohol Solderability Series All RMA Flux, 230°C, 5 Seconds dip, 95% coverage 2000 hours @ 70°C, rated load 1000 hours @70°C, rated load 1000 hours @ 70°C, rated load 30 seconds @ 218°C, dwell 3 second dwell @ 350°C solder 10 second dwell @ 260°C solder 120 seconds @ 260°C solder 0.25% Vibration Series 752, 753, 766, 767 768, 770 213 I 0.25% 204 100g, 1 msec., 3 shocks each plane D 20g, 10-2000Hz, 4 hours/plane CTS Resistor/Electrocomponents 406 Parr Road Berne, IN 46711 fax: (219) 589-3243 www.ctscorp.com EPSB ■ ■ 38 ■ ■ ■ ■ CTS Resistor/Electrocomponents 406 Parr Road Berne, IN 46711 fax: (219) 589-3243 www.ctscorp.com EPSC ■ ■ ■ ■ ■ 39 ■