Chip Resistor Arrays Series 74x FEATURES • Low Cost • Thick Film Technology • High Density Packaging • • • • • • • • - Up to 30% less space per resistor than 0603 chip resistors - Up to 75% less space per resistor than 0805 chip resistors Low Profile; can be used in PCMCIA cards Leadless Surface Mount Construction Concave or Convex Terminations Solder Coated Nickel Barrier Pads Isolated and Bussed Circuits Resistor Arrays Require Fewer Placements Than Discrete Components Tape and Reel Packaging RoHS Compliant in Accordance with EU Directive 2011/65/EU - Lead-Free Termination Finish - Exemption 7(c)-I, Electrical and electronic components containing lead [Pb] in glass ORDERING INFORMATION 742C083 101 J P PART CODE See Available Package Outlines Page 3 PACKAGE CODE 741X163 PACKAGE ONLY! C8 - Specifies 8mm carrier width for tape & reel packaging. C12 - Specifies 12mm carrier width for tape & reel packaging. Blank - Carrier width can be 12mm [typical] or 8mm. RESISTOR CODE Reference Tape & Reel Information table for packaging details for other package outlines. See Table Page 2 RoHS COMPLIANT Matte Sn Finish 3 Digit Resistor Code (For 5% and 2% tolerance only) 1st and 2nd Digit is the value. 3rd Digit is number of zeros. ex. 102 = 1000 ohm = 1k ohm ex. 683 = 68000 ohm = 68k ohm TOLERANCE J = ± 5% (Standard) 3-digit code (Available for 740-746 Series) G = ± 2% 3-digit code 4 Digit Resistor Code (For 1% tolerance only) The first three digits are significant and fourth digit is multiplier. 1st, 2nd and 3rd Digit is the value. 4th Digit is number of zeros. ex. 1001 = 1000 ohm = 1k ohm ex. 6802 = 68000 ohm = 68k ohm (Available for 741-745 Series only except for 741X163, 745X101 and 745X102) F = ± 1% 4-digit code (Available for 741-745 Series only except for 745X101 and 745X102) X = zero ohm jumper For Resistance Value <100 ohm “R” indicates decimal on values less than 100 ohms. ex. 49R9 = 49.9 ohm G and F tolerance for 740X043, please consult factory. Part Number Examples Value\Tolerance 10 Ohm 49.9 Ohm 120 Ohm 1K Ohm 68 Kohm 3-Digit Code J (±5%) 742C083100JP Not Available 742C083121JP 742C083102JP 742C083683JP G (±2%) 742C083100GP Not Available 742C083121GP 742C083102GP 742C083683GP 4-Digit Code F (±1%) 742C08310R0FP 742C08349R9FP 742C0831200FP 742C0831001FP 742C0836802FP Not all performance combinations and resistor values may be available. Contact your local CTS Representative or CTS Customer Service for availability. Document No. 008-0335-0 Page 1 - 4 www.ctscorp.com Rev. H Chip Resistor Arrays Series 74x ORDERING INFORMATION AVAILABLE RESISTOR VALUES & EIA CODES Ohms Code Ohms Code 0 000X 68 680 10 100 75 750 11 110 82 820 12 120 91 910 13 130 100 101 15 150 110 111 16 160 120 121 18 180 130 131 20 200 150 151 22 220 160 161 24 240 180 181 27 270 200 201 30 300 220 221 33 330 240 241 36 360 270 271 39 390 300 301 43 430 330 331 47 470 360 361 51 510 390 391 56 560 430 431 62 620 470 471 Ohms 510 560 620 680 750 820 910 1.0K 1.1K 1.2K 1.3K 1.5K 1.6K 1.8K 2.0K 2.2K 2.4K 2.7K 3.0K 3.3K 3.6K Code 511 561 621 681 751 821 911 102 112 122 132 152 162 182 202 222 242 272 302 332 362 TAPE & REEL INFORMATION Reel 741X043 742C043 741X163 Diameter 740X043 741C083 742C083 7" 741X083 742X083 Parts Per 10,000 10,000 5,000 5,000 Reel Pitch 2mm 2mm 4mm 4mm Carrier 8mm * 8mm 8mm 8mm Width 12mm * Material Paper Paper Paper Paper * See Ordering Information for packaging code indicator. Ohms 3.9K 4.3K 4.7K 5.1K 5.6K 6.2K 6.8K 7.5K 8.2K 9.1K 10.0K 11.0K 12.K 13.K 15.0K 16.0K 18.0K 20.0K 22.0K 24.0K 27.0K 742C163 Code 392 432 472 512 562 622 682 752 822 912 103 113 123 133 153 163 183 203 223 243 273 Ohms 30.0K 33.0K 36.0K 39.0K 43.0K 47.0K 51.0K 56.0K 62.0K 68.0K 75.0K 82.0K 91.0K 100K 110K 120K 130K 150K 160K 180K 200K Code 303 333 363 393 433 473 513 563 623 683 753 823 913 104 114 124 134 154 164 184 204 Ohms 220K 240K 270K 300K 330K 360K 390K 430K 470K 510K 560K 620K 680K 750K 820K 910K 1M Code 224 244 274 304 334 364 394 434 474 514 564 624 684 754 824 914 105 743C043 743C083 745C101 745X101 746X101 744C043 744C083 745C102 745X102 4,000 4,000 4,000 4,000 4,000 5,000 4mm 4mm 4mm 4mm 4mm 4mm 12mm 8mm 12mm 12mm 12mm 8mm Plastic Plastic Plastic Plastic Plastic Paper ELECTRICAL & ENVIRONMENTAL CHARACTERISTICS Series PCB Area (in²) Per Resistor Circuit Type Resistance Range, Ohms 70°C Power Per Resistor * 740 741 742 743 744 745X 745C 746 0.0008 0.0015 0.0037 0.0071 0.0094 0.0058 0.0058 0.0013 Isolated Isolated Isolated Isolated Isolated Bussed Bussed Bussed 10 - 1M 10 - 1M 10 - 1M 10 - 1M 10 - 1M 10 - 330K 100 - 470K 10 - 100K .031W .063W .063W .100W .125W .063W .063W .031W Maximum Operating Voltage 12.5V 25V 50V 100V 200V 50V 50V 25V Resistance Tolerance: Std. ±5% or 0.5Ω (whichever is greater). See Ordering Information for other options available. Operating Temperature Range: -55°C to +125°C. Temperature Coefficient: ±200 ppm/°C. * Total Rated Package Power equals total number of resistors times rated Power per Resistor Test Thermal Cycle Short Time Overload Moisture Resistance High Temperature Exposure Load Life Resistance to Solder Heat Resistance to Solvents Solderability Maximum Delta R 740 741 742-746 1.00% 1.00% 1.00% 2.00% 2.50% 1.00% 2.00% 5.00% 2.00% 3.00% 1.00% 1.00% 3.00% 5.00% 2.00% 1.00% 2.50% 1.00% Document No. 008-0335-0 Test Description 5 Cycles -55°C to +125°C 2½ Times Rated Working Voltage for 5 Seconds 240 Hours 10% rated load, -10°C to +65°C, 90% R.H. 1000 Hours, no load, +125°C 1000 Hours @ +70°C, rated load 10 Seconds @ +260°C solder Isopropyl alcohol, Freon TMC RMA Flux, +230°C, 5 Seconds dip, 95% coverage Page 2 - 4 Rev. H Chip Resistor Arrays Series 74x PACKAGE OUTLINES CONCAVE TERMINATION – TYPE C CONVEX TERMINATION – TYPE X L L P T P D T C B Termination Area (all places) C B Termination Area (all places) W W A A NOTES 1. Termination pads (e3). Barrier plating is nickel (Ni) with Matte tin (Sn) finish. 2. Reflow conditions per JEDEC-J-STD-020, +260°C maximum. Dimensions [mm/inch] Part Code Configuration # Pads # Res. Circuit 740X043 0201 x 2 4 2 Isolated 741X043 0402 X 2 4 2 Isolated 741X083 0402 X 4 8 4 Isolated 741C083 0402 X 4 8 4 Isolated L W 0.80 ±0.10 0.031 ±0.004 1.00 ±0.20 0.039 ±0.008 0.60 ±0.10 0.024 ±0.004 2.00 ±0.20 0.079 ±0.008 741X163 0402 X 8 16 8 Isolated 3.95 ±0.25 0.156 ±0.01 742C043 0603 X 2 4 2 Isolated 1.60 ±0.20 0.063 ±0.008 742X083 0603 X 4 8 4 Isolated 742C083 742C163 0603 X 8 16 8 Isolated 743C043 0805 X 2 4 2 Isolated 743C083 0805 X 4 8 4 Isolated 744C043 1206 X 2 4 2 Isolated 744C083 1206 X 4 8 4 Isolated - 10 8 Bussed 745C101 745C102 745X101 745X102 746X101 - 10 8 Bussed - 10 8 Bussed 3.20 ±0.20 0.126 ±0.008 6.40 ±0.20 0.252 ±0.008 2.54 ±0.20 0.100 ±0.008 5.08 ±0.20 0.200 ±0.008 2.54 ±0.20 0.100 ±0.008 5.08 ±0.20 0.200 ±0.008 6.40 ±0.20 0.252 ±0.008 6.40 ±0.20 0.252 ±0.008 3.20 ±0.20 0.126 ±0.008 1.00 ±0.20 0.039 ±0.008 P 0.50 0.020 0.65 0.026 0.50 0.020 1.60 ±0.15 0.063 ±0.006 1.60 ±0.20 0.063 ±0.008 T A B 0.35 ±0.10 0.014 ±0.004 0.35 ±0.10 0.014 ±0.004 0.40 ±0.15 0.016 ±0.006 0.375 ±0.125 0.015 ±0.005 0.35 ±0.10 0.014 ±0.004 0.295 ±0.135 0.012 ±0.005 0.30 ±0.15 0.012 ±0.006 0.29 ±0.11 0.011 ±0.004 0.175 ±0.125 0.007 ±0.005 0.20 ±0.10 0.008 ±0.004 0.15 0.006 0.25 0.010 0.25 0.010 0.265 0.011 0.45 ±0.10 0.018 ±0.004 0.30 ±0.10 0.012 ±0.004 0.30 ±0.15 0.012 ±0.006 0.375 ±0.175 0.0147 ±0.007 0.525 ±0.175 0.021 ±0.007 0.55 ±0.15 0.022 ±0.006 0.50 ±0.15 0.020 ±0.006 0.45 ±0.20 0.018 ±0.008 0.30 ±0.20 0.012 ±0.008 0.525 ±0.175 0.021 ±0.007 0.50 ±0.15 0.020 ±0.006 0.40 0.016 0.275 0.011 0.35 0.014 0.40 0.016 [Typ.] 0.80 0.032 2.00 ±0.20 0.079 ±0.008 1.27 0.050 0.60 ±0.10 0.024 ±0.004 0.80 ±0.10 0.031 ±0.006 3.20 ±0.20 0.126 ±0.008 1.27 0.050 0.60 ±0.10 0.024 ±0.004 0.80 ±0.10 0.031 ±0.006 0.575 ±0.125 0.025 ±0.005 0.60 ±0.10 0.024 ±0.004 0.60 ±0.10 0.024 ±0.004 0.60 ±0.15 0.024 ±0.006 0.95 ±0.20 0.037 ±0.008 0.35 ±0.05 0.014 ±0.002 3.10 ±0.30 0.126 ±0.012 3.20 ±0.20 0.126 ±0.008 1.60 ±0.15 0.063 ±0.006 1.27 0.050 0.64 0.025 RECOMMENDED LAND PATTERNS 0.20 ±0.15 0.008 ±0.006 0.40 ±0.20 0.016 ±0.008 0.50 ±0.30 0.020 ±0.012 0.50 0.020 0.30 0.012 SERIES 740 741X043 741X083 741C083 741X163 742 743 744 745 746 Document No. 008-0335-0 Page 3 - 4 C ±0.15 ±0.006 ±0.15 ±0.006 ±0.10 ±0.004 ±0.10 ±0.004 ±0.20 ±0.008 ±0.115 ±0.005 ±0.15 ±0.006 ±0.175 ±0.007 ±0.20 ±0.008 ±0.15 ±0.006 D 0.33 0.013 0.40 0.016 ±0.15 ±0.006 ±0.15 ±0.006 N/A 0.325 ±0.175 0.013 ±0.007 N/A 0.525 ±0.225 0.021 ±0.009 N/A N/A 0.55 ±0.10 0.022 ±0.004 N/A 0.55 ±0.10 0.022 ±0.004 N/A 0.55 0.022 0.50 0.020 0.35 0.014 ±0.30 ±0.012 ±0.15 ±0.006 ±0.15 ±0.006 N/A 1.10 0.043 0.45 0.018 ±0.15 ±0.006 ±0.05 ±0.002 DIMENSIONS [mm/in] A 0.900 0.035 1.800 0.071 1.800 0.071 1.800 0.071 1.800 0.071 2.600 0.102 3.000 0.118 4.200 0.165 3.900 0.154 2.600 0.102 B 0.300 0.012 0.500 0.020 0.500 0.020 0.500 0.020 0.500 0.020 0.800 0.031 1.000 0.039 2.200 0.087 2.100 0.083 0.800 0.031 C 0.300 0.012 0.400 0.016 0.300 0.012 0.300 0.012 0.300 0.012 0.450 0.018 0.650 0.026 0.650 0.026 0.900 0.035 0.350 0.014 D 0.500 0.020 0.670 0.026 0.500 0.020 0.500 0.020 0.500 0.020 0.800 0.031 1.270 0.050 1.270 0.050 1.270 0.050 0.640 0.025 Rev. H Chip Resistor Arrays Series 74x CIRCUIT TYPES 740X043 2 Resistors 4 Terminations 744C043 744C083 2 Resistors 4 Terminations 4 Resistors 8 Terminations 741C083 4 Resistors 8 Terminations 745C101 8 Resistors 10 Terminations 5 0 m il p itch ( 1 .2 7m m ) C om m on Pad D e sig n a to r 741X043 2 Resistors 4 Terminations 742C043 741X083 4 Resistors 8 Terminations 2 Resistors 4 Terminations 745C102 8 Resistors 10 Terminations 741X163 8 Resistors 16 Terminations 742C083 4 Resistors 8 Terminations 742C163 8 Resistors 16 Terminations 745X1 01 745X102 8 R e s ist o rs 1 0 T e r m in a tio n s 8 R e s ist o rs 1 0 T e r m in a tio n s N o te : T he M a r kin g C o n ce p t fo r C o n ve x a n d C o nc a ve S e ri e s 7 4 5 is Di ffe re n t. 742X083 4 Resistors 8 Terminations 746X101 8 Resistors 10 Terminations 743C043 2 Resistors 4 Terminations Document No. 008-0335-0 743C083 4 Resistors 8 Terminations Page 4 - 4 Rev. H