New Product UH6PJ Vishay General Semiconductor High Current Density Surface Mount Ultrafast High Voltage Rectifier FEATURES eSMP ® Series • Very low profile - typical height of 1.1 mm • Ideal for automated placement K • Oxide planar chip junction • Ultrafast recovery time 1 • Soft recovery characteristics 2 • Low switching losses, high efficiency • High forward surge capability TO-277A (SMPC) K Anode 1 Cathode Anode 2 • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC PRIMARY CHARACTERISTICS • Halogen-free according to IEC 61249-2-21 definition IF(AV) 6.0 A VRRM 600 V IFSM 80 A trr 25 ns VF at IF = 6.0 A 1.3 V TJ max. 175 °C MECHANICAL DATA Case: TO-277A (SMPC) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS compliant, and automotive grade TYPICAL APPLICATIONS For use in high voltage, high frequency power factor corrections, switching mode power supplies, freewheeling diodes and secondary DC/DC rectification application. Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker test MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code UH6PJ UNIT H6PJ Maximum repetitive peak reverse voltage VRRM 600 V Maximum average forward rectified current (fig. 1) IF(AV) 6.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 80 A TJ, TSTG - 55 to + 175 °C Operating junction and storage temperature range Document Number: 89069 Revision: 19-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product UH6PJ Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 3.0 A IF = 6.0 A Instantaneous forward voltage IF = 3.0 A IF = 6.0 A VR = 600 V Reverse current Maximum reverse recovery time SYMBOL TYP. MAX. 1.6 - 1.9 3.0 1.1 - 1.3 1.8 - 10 46 200 23 25 33 45 0.3 - IRM 6.5 - A Qrr 150 - nC TA = 25 °C VF (1) V TA = 125 °C TA = 25 °C TA = 125 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A IF = 1.0 A, dI/dt = 50 A/μs, VR = 30 V, Irr = 0.1 IRM IR (2) μA ns trr S Typical softness factor (tb/ta) Typical reverse recovery current IF = 6 A, dI/dt = 200 A/μs, VR = 400 V, TJ = 125 °C Typical stored charge UNIT - Typical forward recovery time IF = 6 A, dI/dt = 48 A/μs, VF = 1.1 x VF max. tfr 150 - ns Typical junction capacitance 4.0 V, 1 MHz CJ 30 - pF Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL RJA Typical thermal resistance UH6PJ (1) UNIT 90 °C/W RJL (2) 5 Notes (1) Units mounted on recommended PCB 1 oz. pad layout (2) With heatsink ORDERING INFORMATION (Example) PREFERRED P/N UH6PJ-M3/86A UH6PJ-M3/87A UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.10 86A 1500 7" diameter plastic tape and reel 13" diameter plastic tape and reel 0.10 87A 6500 (1) 0.10 86A 1500 7" diameter plastic tape and reel UH6PJHM3/87A (1) 0.10 87A 6500 13" diameter plastic tape and reel UH6PJHM3/86A Note (1) Automotive grade www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number: 89069 [email protected], [email protected], [email protected] Revision: 19-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product UH6PJ Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1000 Resistive or Inductive Load Instantaneous Reverse Current (µA) Average Forward Rectified Current (A) 7 6 5 4 3 2 TL Measured at the Cathode Band Terminal 1 TA = 150 °C 100 TA = 125 °C 10 TA = 100 °C 1 TA = 25 °C 0.1 0.01 0 0 25 50 75 100 125 150 10 175 20 30 40 50 60 70 80 90 Lead Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Maximum Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics 10 100 8 D = 0.1 6 D = 1.0 4 2 0 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p D = 0.8 D = 0.5 D = 0.3 D = 0.2 Junction Capacitance (pF) Average Power Loss (W) TA = 175 °C 10 0 1 2 3 4 5 6 7 0.1 1 10 Average Forward Current (A) Reverse Voltage (V) Fig. 2 - Forward Power Loss Characteristics Fig. 5 - Typical Junction Capacitance 100 Instantaneous Forward Current (A) 100 TA = 175 °C TA = 150 °C 10 TA = 125 °C TA = 100 °C 1 TA = 25 °C 0.1 0.01 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Document Number: 89069 Revision: 19-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product UH6PJ Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-277A (SMPC) 0.187 (4.75) 0.175 (4.45) 0.016 (0.40) 0.006 (0.15) K 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) 2 1 0.047 (1.20) 0.039 (1.00) 0.171 (4.35) 0.167 (4.25) 0.146 (3.70) 0.134 (3.40) Mounting Pad Layout 0.087 (2.20) 0.075 (1.90) 0.189 (4.80) MIN. 0.189 (4.80) 0.173 (4.40) 0.186 (4.72) MIN. 0.268 (6.80) 0.155 (3.94) NOM. 0.030 (0.75) NOM. 0.049 (1.24) 0.037 (0.94) 0.050 (1.27) MIN. 0.084 (2.13) NOM. 0.053 (1.35) 0.041 (1.05) 0.041 (1.04) 0.055 (1.40) MIN. Conform to JEDEC TO-277A www.vishay.com 4 For technical questions within your region, please contact one of the following: Document Number: 89069 [email protected], [email protected], [email protected] Revision: 19-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1